This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Tomorrow's Diesel - What Will It Offer?
Annotation ability available
Sector:
Event:
Mid-Year Meeting
Language:
English
Abstract
After reviewing the present state of diesel engine design art as applied to vehicle applications, the paper analyzes future application requirements and outlines possible paths of engine development. In general, future requirements demand engines of higher output, lighter weight, better fuel economy, and smoke-free operation. A better understanding of vehicle load demands and careful matching of engine and drive-line will be required. Reference to extensive recent research developments shows that the diesel engine industry will be prepared to meet this challenge to provide the customer the best possible engine in terms of return on his investment.
Authors
Citation
Holler, H., "Tomorrow's Diesel - What Will It Offer?," SAE Technical Paper 650479, 1965, https://doi.org/10.4271/650479.Also In
References
- Kenneth W. Self “The Future of Higher Horsepower Engines.” Paper 384A presented at SAE Summer Meeting St. Louis June 1961
- John W. Wright Samuel C. Tignor “Relationships between Gross Weights and Horsepowers of Commercial Vehicles Operating on Public Highways.” SAE Transactions 73 1965
- “Altitude Tests of Turbocharged Engines,” The Oil Engine and Gas Turbine Oct. 1961
- Von der Nuell W. T. “Turbocharging for Better Vehicle Engines.” Paper 631A, presented at SAE Automotive Engineering Congress Detroit January 1963
- Lux W. T. “Turbocharged Diesel Engines at Work.” SAE Paper 1958
- Mitchell J. E. “An Evaluation of Aftercooling in Turbocharged Diesel Engine Performance,” SAE Transactions 67 1959 401
- Vance D. R. Mayemick R. “Intercooled Versus Non-Intercooled Engine Performance.” Paper 766A presented at SAE Powerplant Meeting Chicago October 1963
- Helmich M. J. Ulrey L. S. “The Design and Development of KSV Engine.” AS ME Paper - 62-OGP-l 1962
- Miller R. Lieberherr H. U. “The Miller Supercharging System for Diesel and Gas Engines,” CIMAC International Conference Proc. 1959
- Robinson R. R. Mitchell J. E. “Development of a 300 psi (21.1 Kp/cm) Bmep Continuous Duty Diesel Engine,” CIMAC International Congress 1965
- Hull W. L. “High Output Diesel Engines,” SAE Transactions 72 1964 68
- Gish R. E. “Determination of True Engine Friction,” SAE Transactions 66 1958 649
- Kerley R. V. Thurston K. W. “The Indicated Performance of Otto Cycle Engines,” SAE Transactions 70 1962 5
- Bishop I. N. “The Effect of Design Variables on Friction and Economy.” SAE Transactions 73 1965 334 358
- Austen A. E. W. Lyn W. T. “Some Steps Toward Calculating Diesel-Engine Behavior,” SAE Transactions 70 1962 526
- Tsao K. C. Myers P. S. Uyehara O. A. “Gas Temperatures during Compression in Motored and Fired Diesel Engines,” SAE Transactions 70 1962 136
- Meyer W. E. DeCarolis J. J. “Compression Temperatures in Diesel Engines under Starting Conditions,” SAE Transactions 70 1962 163
- “Digital Calculations of Engine Cycles.” SAE Progress in Technology 7 1964
- Alcock J. F. Scott Wm. “Some More Light on Diesel Combustion,” Paper 872A presented at SAE Summer Meeting Chicago June 1964
- Nagao F. Kakimoto H. “Swirl and Combustion in Divided Combustion Chamber Type Diesel Engines,” SAE Transactions 70 1962 681
- Burrows M. C. Shimizu S. Myers P. S. Uyehara O. A. “The Measurement of Unburned Gas Temperatures in an Engine by an Infrared Radiation Pyrometer,” SAE Transactions 69 1961 514
- Bailey J. M. “Multifuel Combustion System for High Performance Diesel Engines.” Paper 790B presented at SAE Automotive Engineering Congress Detroit January 1964
- Vincent E. T. Henein N. A. “Thermal Loading and Wall Temperatures as Functions of Performance of Turbocharged Compression Ignition Engines,” SAE Transactions 67 1959 478
- Brown D. H. “Diesel Engine Heat Transfer Design Criteria,” SAE Transactions 66 1958 522
- Overbye V. D. Bennethum J. E. Uyehara O. A. Myers P. S. “Unsteady Heat Transfer in Engines,” SAE Transactions 69 1961 461
- Henein N. A. “Instantaneous Heat Transfer and Coefficients between Gas and Combustion Chamber of a Diesel Engine.” Paper 969B, presented at SAE International Congress of Automotive Engineering Detroit January 1965
- Landen E. W. “Nitrogen Oxides and Diesel Engine Variables.” SAE Paper 714B 1963
- McConnell G. “Oxides of Nitrogen in Diesel Engine ExhaustGas: Their Formation and Control.” The Institute of Mechanical Engineers, Internal Combustion Engine Group 1964
- “Vehicle Emissions.” SAE Progress in Technology 6 1964
- Lux W. J. “A Reliability Study of Diesel Engines.” Paper S374 presented at SAE Earthmoving Industry Conference April 1964
- “140 lb/in. bmep - Naturally Aspirated,” Gas and Oil Power Feb. 1964
- Dawson J. G. Hayward W. J. Glamann P. W. “Some Experiences with a Differentially Supercharged Diesel Engine.” Paper 932A presented at SAE Powerplant Meeting Baltimore October 1964
- Sammons H. Chatterton E. “The Napier Nomad Aircraft Diesel Engine,” SAE Transactions 63 1955 107
- Witzky J. E. “Forecasts of Future Power Plant Developments.” AS ME Paper 64-OGP-8 1964
- Zinner K. “Theoretical and Experimental Investigation of an Operational Procedure Involving the Use of a Coupled Exhaust Turbine (Compound Systems).” CIMAC International Congress Proc 1962
- Chatterton E. “The Diesel Engine in Association with the Gas Turbine,” Institute of Mechanical Engineers Proc 174 1 1960
- Wallace W. A. Lux F. B. “A Variable Compression Ratio Engine Development.” SAE Transactions 72 1964 680 707