This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Microstrains and Particle Size on the Fatigue Properties of Steel
Annotation ability available
Sector:
Language:
English
Abstract
Fatigue tests were run on notched SAE 86B45 specimens in bending at three hardness levels to determine the influence on fatigue of the X-ray measured parameters of microstrain and particle size. Changes in these quantities were produced by shot peening. The attendant macro residual stresses were shown to be equivalent to mechanically applied stresses and were compensated for by appropriate values of mean mechanical stress. Peening of the soft material produced large changes in microstrain and particle size and enhanced the fatigue limit. Peening did not alter the microstrain and particle size in the hard material.
Authors
Citation
Evans, W. and Millan, J., "Effect of Microstrains and Particle Size on the Fatigue Properties of Steel," SAE Technical Paper 640445, 1964, https://doi.org/10.4271/640445.Also In
References
- Morrow Jo Dean Millan J.F. “Influence of Residual Stress on Fatigue of Steel,*” SAE TR-198 1961 4 5
- Gough, H. J. “Some Experiments on the Resistance of Metals to Fatigue Under Combined Stresses,” Aeronautical Research Council, R. and M. 2522 His Majesty Stationery Office 1951 124
- Lipson Charles Juvinall, Robert C. “Handbook of Stress and Strength.” The MacMillan Co. 1963 141
- Christenson, A. L. et al. “The Measurement of Stress by X-Ray,” SAE TR-182 1960
- Martin, D. E. “Evaluation of Methods of Measurement of Residual Stress,” SAE TR-147 1960
- Evans W. P. Buenneke, R. W. “X-Ray Line Broadening of Hardened and Cold Worked Steel,” Trans. Met. Soc. AIME 227 April 1963 447 451
- Evans W. P. Littmann, W. E. “‘Macro’ and ‘ Micro’ Residual Stresses,” SAE Journal 71 March 1963 118 121
- Warren B. E. Averbach, B. L. “The Effect of Cold-Work Distortion on X-Ray Pattern,” J. Appl. Phys. 21 1950 595 599
- Warren B. E. Averbach, B.L. “The Separation of Cold-Work Distortion and Particle Size Broadening in X-Ray Patterns, ” J. Appl. Phys. 23 1952 497
- Lipson Charles Juvinall, Robert C. “Application of Stress Analysis to Design Metallurgy,” University of Michigan 1961 232
- Warren, B.E. “X-Ray Studies of Deformed Metals,” Progress in Metal Physics New York Pergamon Press 8 1959 147 202
- Cohen J. B. Evans W. P.
- Polakowski, N. H. “Observations on the Mechanical Behavior of Heat-Treated Steels at High Hardness Levels,” J. Iron and Steel Inst. 185 1957 67