This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Elastohydrodynamic Lubrication of Rolling-Sliding Surfaces
Annotation ability available
Sector:
Language:
English
Abstract
The analysis of elastohydrodynamic lubrication is aimed at establishing more rational, practically applicable design and application criteria for concentrated contact, lubricated devices such as rolling bearings, gears, cams, and seals. In this paper, the progress made in recent years in both theoretical and experimental analysis of the elastohydrodynamic lubrication process is briefly reviewed and some preliminary results of current work are described. This work includes theoretical analysis of the elastohydrodynamic problem including thermal effects and experimental measurements of the temperature of a surface passing through a concentrated rolling-sliding contact.
Topic
Citation
Orcutt, F. and Cheng, H., "Elastohydrodynamic Lubrication of Rolling-Sliding Surfaces," SAE Technical Paper 640410, 1964, https://doi.org/10.4271/640410.Also In
References
- Sternlicht, B. Reid, J. C. Arwas, E. B. “Performance of Elastic Centrally Pivoted, Sector, Thrust Bearing Pads - Part I.” ASME Trans. 83 2 1961
- Hertz H. “Ueber die Beruehrung fester elastischerKoerper” 1881 “Ueber die Beurehrung fester elastischer Koerper and ueber die Haerte” 1882 “Gesammelte Werke vonHeinrich Hertz,” 1 Leipzig 1895 155 196 Hertz H. “Miscellaneous Papers” Jones D. E. Schott G. A. New York Macmillan Co. 1896 146 183
- Mindlin, J. R. D. “Compliance of Elastic Bodies in Contact.” J. Applied Mechanics 16 1949 259 268
- Loo, T. T. “Effect of Curvature on the Hertz Theory for Two Circular Cylinders in Contact.” J. Applied Mechanics 25 ASME Trans. 80 1958 122 124
- Hetenyi M. McDonald, P. H. “Contact Stresses under Combined Pressure and Twist.” J. Applied Mechanics 25 1958 396 401
- Martin, H. M. “The Lubrication of Gear Teeth.” Engineering 102 1916 119
- Cameron A. Wood, W. L. “The Full Journal Bearing.” Proc. Inst. Mech. Engrg. 161 1949 59
- Neal, P. B. “The ‘Off’ Boundary Condition in Hydrodynamically-Lubricated Convergent-Divergent Slider Bearing.” J. Mech. Sci. 1 1960 84
- Floberg, L. “Boundary Conditions of Cavitation Regions in Journal Bearings.” ASLE Paper No. 60-AM-5A-1 1960
- Gatcombe, E. K. “Lubrication Characteristics of Involute Spur Gears - A Theoretical Investigation.” ASME Trans. 67 177
- McEwen, E. “The Effect of Variation of Viscosity with Pressure on the Load-Carrying Capacity of the Oil Film between Gear Teeth.” J. Inst. Pet. 38 1952 646
- Stephenson R. R. Osterle, J. F. “A Direct Solution of the Elastohydrodynamic Lubrication Problem.” Paper No. 62-AM-3B-1 presented at 17th ASLE Annual Meeting, St. Louis May 1962
- Grubin A. N. Vinogradova, I. E. “Investigation of the Contact of Machine Components.” Moscow Ts Niitmash, Book No. 30 1949 DSIR London
- Poritsky, H. “Lubrication of Gear Teeth, Including the Effect of Elastic Displacement.” Paper presented at First ASLE National Symposium on Fundamentals of Friction and Lubrication in Engineering September 1952
- Petrusevich, A. “Fundamental Conclusions from the Contact Hydrodynamic Theory of Lubrication.” Isvestiya Akademii Nauk S. S. R. Odtelenie Tekhnicheskikh Nauk 2 1951 209 223 Ministry of Defense London
- Dowson D. Higginson, G. R. “A Numerical Solution to the Elastohydrodynamic Problem.” J. Engrg. Sci. 1 1 6
- Dowson D. Higginson, G. R. “The Effect of Material Properties on the Lubrication of Elastic Rollers.” J. Engrg. Sci. 3 188
- Archard, G. D. Gair, F. C. Hirst, W. “The Elastohydrodynamic Lubrication of Rollers.” Proc. Roy. Soc., Series A 262 1961
- Bell, J. C. “Lubrication of Rolling Surfaces by a ReeEyring Fluid.” ASLE Trans 1961
- Sternlicht, B. Lewis, P. Flynn, P. “Theory of Lubrication and Failure of Rolling Contacts.” J. Basic Engrg., ASME Trans. June 1961 213
- Cheng, H. S. “On Forward and Inverse Iteration of the Elastohydrodynamic Problem.”
- Sibley L. B. Orcutt, F. K. “Elastohydrodynamic Lubrication of Rolling-Contact Surfaces.” ASLE Trans. 1963
- Zaretsky, E. V. Sibley, L. B. Anderson, W. J. “The Role of Elastohydrodynamic Lubrication in Rolling-Contact Fatigue.” ASME Paper No. 62-LUB-4
- Kannel, J. W. “A Study of the Influence of Lubricants on High-Speed Rolling-Contact Bearing Performance.” ASD-TR-61-643 Part III April 1963
- Crook, A. W. “The Lubrication of Rollers.” Phil. Trans. Royal Soc., London A 250 981 387 409 1958
- Orcutt, F. K. “Experimental Investigation of Surface Temperature in Rolling-Sliding Contacts.”
- Bell, J. C. Kannel, J. W. Allen, C. M. “The Rheological Behavior of the Lubricant in the Contact Zone of a Rolling Contact System.”