This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Determination of Fragility to Meet Random and Sinusoidal Vibration Environments
Annotation ability available
Sector:
Language:
English
Abstract
Recommended Content
Authors
Topic
Citation
Brust, J., "Determination of Fragility to Meet Random and Sinusoidal Vibration Environments," SAE Technical Paper 610114, 1961, https://doi.org/10.4271/610114.Also In
References
- Miles J. W. “On Structural Fatigue Under Random Loading,” J. Aero Sc. 21 11 November 1954 753 762
- McIntosh V. C. Granick N. “Experiments in Random Vibration,” WADC Tech. Note 56-228 June 1956
- Crede C. E. Lunney E.J. “Establishment of Vibration and Shock Tests for Missile Electronics as Derived from the Measured Environment,” WADC TR 56-503 Dec. 1 1956
- Freudenthal A. M. ‘Fatigue of Materials and Structures under Random Loading,’ “WADC-University of Minnesota Conference on Acoustical Fatigue,” WADC TR 59-676 March 1961 129 152
- Belcher P.M. Van Dyke J.D. Eshleman A.L. “Aircraft Structure to Withstand Acoustic Loads,” Aero/Space Eng. 18 6 June 1959 24 30
- Morrow C.T. Muchmore R.B. “Shortcomings of Present Methods of Measuring and Simulating Vibration Environments,” J. Appl. Mech. 22 3 September 1955 367 371
- Trotter W. D. “An Experimental Evaluation of Sinusoidal Substitutes for Random Vibrations,” Shock and Vibration Bull. 29 Office of Sec. of Defense, Res. & Engrg. November 1960
- Spence H. R. “Random-Sine Vibration Equivalence Tests of Missile Electronic Equipment,” Proc. IES April 1960 501 516 C-50
- Spence H.R. Luhrs H. N. “Peak Criterion in Random vs. Sine Vibration Testing,” JASA 33 5 May 1961 652 654
- Dillon R.S. “Vibration Effects on Design of Stellar-Inertial Guidance System,” Shock and Vibration Bull. 27-Part II Office of Sec. of Defense, Res. & Engrg. June 1959 67 80
- Mustain R. W. “Extended Environmental Tests of SM-62 Missile Components,” Shock and Vibration Bull. 27-Part II Office of Sec. of Defense, Res. & Engrg. June 1959 185 210
- Baugh R. L. “Environment Testing of Production Equipment,” Shock and Vibration Bull. 25 - Part II Office of Sec. of Defense, Res. & Engrg. December 1957 170 176
- Jacobson R. H. “Vibration & Shock Evaluation of Airborne Electronic Component Parts & Equipments,” WADC TR 56-301 December 1956
- Rowe E.G. Welch P. “Development in Trustworthy-Valve Techniques,” Elec. Commun. 31 3 September 1954 172 188
- H. M.F. Gouverneur M.B. Levine M.B. “The Vibration Susceptibility of Certain Existing Airborne Electrical Switch Terminations,” AIEE Paper CP 55-826 Oct. 25 1955
- Safford F.B. Inouye W.S. “Preventing Equipment Vibration Failures,” Electronics 31 15 Apr. 11 1958 92 94
- Crede C.E. Gertel M. Cavanaugh R.E. “Establishing Vibration and Shock Tests for Airborne Electronic Equipment,” WADC Tech. Report 54-272 June 1954
- Himelblau H. et al. “A Statistical Method for Determining Vibration Damage to Airborne Equipment,” SAE Paper No. 195 October 1957 SAE Journal 65 12 November 1957 48 51
- Lunney E.J. Crede C.E. “The Establishment of Vibration & Shock Tests for Airborne Electronics,” WADC TR 57-75 January 1958
- Lewis F. M. “Vibration During Acceleration Through a Critical Speed,” Trans. ASME 1932 253 261
- Carson J.R. Fry T.C. “Variable Frequency Electric Circuit Theory with Application to Theory of Frequency Modulation,” Bell System Tech. J. 16 4 October 1937 513 540
- Starkey W.L. Marco S. M. “Effects of Complex Stress-Time Cycles on the Fatigue Properties of Metals,” Trans. ASME 79 6 August 1957 1329 1336
- Himelblau H. “A Comparison of Periodic and Random Vibration Problems,” Proc., 3rd Nat. Flt. Test Instr. Sym. ISA May 1, 1957 2.10.1 2.10.3
- Luckman J. E. “Reliability Improvement - A Plan to Achieve and Measure Reliability of Aircraft Equipment,” Appl. & Ind. 16 January 1955 378 383
- McGregor H.N. Otera J.M. et al. “Acoustic Problems Associated with Undeground Launching of a Large Missile,” Shock and Vibration Bull. 29 Office of Sec. of Defense, Res. & Engrg. November 1960
- Brust J. M. Benedetti F.J. et al. Interdepartmental Memorandum and Test Reports Orgn. 4251/40 Nortronics Hawthorne, California
- DuBois W. “Random Noise Vibration Test Procedure,” MB Vibration Notebook 5 1 February 1959 1 3
- Ross J. A. “A New Method for Equalization in Random Vibration Testing,” Shock and Vibration Bull. 27 - Part II Office of Sec. of Defense, Res. & Engrg. June 1959 121 128
- Maki C.E. “Multi-Band Compensation,” MB Vibration Notebook 6 3 June 1960 6 7
- Morrow C.T. “Shock and Vibration Environment,” Shock and Vibration Instrumentation, ASME June 1956 75 88
- Granick N. “The Vibration-Test Argument,” Military Electronics 2 6 June 1957 24 25
- Granick N. “Status Report on Random Vibration Simulation,” WADC TN 58-274 March 1959
- Stradling C.G. “How Good Are Random-Wave Vibration Tests?,” Prod. Eng. 31 49 Dec. 5 1960 82 83
- Klein G.H. “Defends Random-Wave Vibration Tests,” Prod. Eng. 32 9 Feb. 27 1961 29
- Warren A.G. “The Testing of Equipments Subject to Vibration; Some Basic Considerations,” ARDE (U.K. Rep. (L) 7/58 March 1958
- Warren A.G. “The Testing of Equipments Subject to Vibration; Further Considerations,” ARDE (U.K.) Rep. (L) 1/60 March 1960
- Himelblau H. Keer L. M. “Space Requirements for Simple Mechanical Systems Excited by Random Vibration.” JASA 32 January 1960 76 80
- Foster J. E. “Random-Sinusoidal Vibration Correlation Study,” J. Envir. Sc. 4 August 1961 6 15