This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
APPLICATIONS AND LIMITATIONS OF NEW DEVELOPMENTS IN METALS JOINING PROCESSES
Annotation ability available
Sector:
Language:
English
Abstract
Authors
Citation
RIEPPEL, P., "APPLICATIONS AND LIMITATIONS OF NEW DEVELOPMENTS IN METALS JOINING PROCESSES," SAE Technical Paper 600299, 1960, https://doi.org/10.4271/600299.Also In
References
- Voloshkerich, G. Z. “Electric Slag Welding,” Avtomaticheskaia Svarka 6 (6) 1953 3 10
- Anders, W. “Welding Heavy Sections by the Russian Electroslag Process,” Schweissen and Schneider 19 1 1957
- “A Note on the Electric Slag Welding Process,” Info-search London 1957
- Gotal’skiy, Yu. N. “Flux Properties Which Determine the Stability of Electroslag Welding Processes,” Svarochnoe Proizvodstvo 3 1957 1 3
- Podgaetskii, V. V. “Fluxes for Electroslag Welding,” Avotomaticheskaia Svarka 9 (4) 1956 30 49
- Sternenbogen, Yu. A. Zaitser, Yu. N. Avtomaticheskaia Svarka 9 (4) 1956 130 132
- Richter, K. E. Essing, J. F. M. “Consumable-Electrode Inert-Gas Welding With Small-Diameter Wires,” Welding Journal 36 (9) 1957 893 899
- Tuthill, R. W. “Dip-Transfer Carbon-Dioxide Welding,” Welding Journal 38 (10) 1959 976 981
- “‘Short-Arc’ Welding of Thin Materials,” Welding Design and Fabrication 32 7 1959 60 61
- “New System Eliminates CO 2 Disadvantages,” Welding Engineer 44 5 1959 46
- “The Dip-Transfer Process,” Welding and Metals Fabrication (British) 27 8 1959 347 348
- Wyman, W. L. “High-Vacuum Electron-Beam Fusion Welding,” Welding Journal, Welding Research Supplement 37 (2) 1958 49-s 53-s
- Stohr, J. A. Briola, J. “Vacuum Welding of Metals,” Welding and Metal Fabrication 26 (10) 1958 366 370
- Burton, G. Matchett, R. L. “Electrons Shot from Guns Make High-Purity Welds,” American Machinist 103 (4) 1959 95 98
- Mardvintseva, A. V. Al’shanskii, N. A. “Technique for Welding Active Metals,” Svarochnoe Proizvodstvo 5 1959 4 7
- Hackman, R. L. “New Developments in the Welding of Aluminum,” Welding Journal 38 (7) 1959 676 684
- Hackman, R. L. “Consumable-Electrode Inert-Arc Spot Welding,” Welding Journal 34 (9) 1955 839 845
- “Pilot Arc Gives Positive Start,” Metal-working Bulletin, Linde Air Products Company 10 4 July 1959
- Boeing Airplane Company “Determination of Adapt ability of Titanium Alloys,” Processes and Assembly of Components 4 December 1 1958
- Rudd, W. C. “A Look at High Frequency Resistance Welding,” Metal Progress 73 (5) 1958 82 86
- Mecklenborg, L. W. “Butt Welding Sheet by the Foil-Seam Process,” Welding Journal 39 (1) 1960 19 28
- Park, F. K. “Magnetic Force Welding--The New Joining Method for Vinyl-Clad Steel,” Product Engineering 29 (38) 1958 82 85
- Chang, W. H. “Basic Characteristics of Some Heat-Resisting Brazing Filler Metals,” Welding Journal 35 (9) 1956 431-s 443-s
- McDonald, A. S. “Alloys for Brazing Thin Sections of Stainless Steel,” Welding Journal 36 (3) 1957 131-s 140-s
- Slaughter, G. M. Leitten, C. F. Patriarca, P. Hoffman, E. E. Manly, W. D. “Sodium Corrosion and Oxidation Resistance of High-Temperature Brazing Alloys,” Welding Journal 36 (5) 1957 217-s 225-s
- Bredzs, N. Schwartzbart, H. “Self-Fluxing Airproof Brazing Alloys,” Welding Journal 36 (7) 1957 248-s 252-s
- Feduska, W. “The Nature of High-Temperature Brazing Alloy-Base Metal Interface Reactions,” Welding Journal 37 (2) 1958 62-s 73-s
- Huschke, E. G. Hoppin, G. S. III “High-Temperature Vacuum-Brazing of Jet-Engine Materials,” Welding Journal 37 (5) 1958 223-s 240-s
- Slaughter, G. M. Patriarca, P. Manly, W. D. “Bonding of Cermet-Valve Components to Metals,” Welding Journal 37 (6) 1958 249-s 254-s
- Chang, W. H. “Further Evaluation of Ni-Cr-B and Au-18Ni Brazing Alloys,” Welding Journal 37 (12) 1958 535-s 542-s
- Van Houten, G. R. “A Survey of the Bonding of Cermets to Metals,” Welding Journal 37 (12) 1958 559-s 569-s
- Lynch, J. F. Feinstein, L. Huggins, R. A. “Brazing by the Diffusion-Controlled Formation of a Liquid Intermediate Phase,” Welding Journal 38 (2) 1959 85-s 89-s
- Feduska, W. “High-Temperature Brazing Alloy-Base Metal Wetting Reactions,” Welding Journal 39 (3) 1959 122-s 131-s
- Hoppin, G. S. III Bamberger, E. N. “Effects of Hydrogen Brazing on Properties of High-Temperature Alloys,” Welding Journal 38 (4) 1959 194-s 201-s
- King, P. P. McGeary, R. K. “Braze Bonding Stainless-Steel Fuel Elements for Nuclear Reactors,” Welding Journal 38 (6) 1959 241-s 246-s
- Clark, E. J. “Vacuum-Diffusion Joining of Titanium,” Welding Journal 38 (6) 1959 251-s 258-s
- Bertossa, R. C. Rau, S. “Heat-Extractive Brazed Bimetals Show Promise for Missile and Industrial Applications,” Welding Journal 38 (7) 1959 273-s 281-s
- Kinelski, E. H. Adamee, J. B. “New Developments in Brazing High-Temperature Nickel-Base Alloys,” Welding Journal 38 (12) 1959 482-s 486-s
- Antonevich, J. N. Monroe, R. E. “Ultrasonics and Welding,” Battelle Technical Review March 1959 3 8
- E. Weare, N. et al “Research and Development of Procedures for the Joining of Similar and Dissimilar Heat-Resisting Alloys by Ultrasonic Welding,” Battelle Memorial Institute
- Antonevich, J. N. “Ultrasonic Welding Equipment,” IRE National Convention Record 6 1959 204 212
- Jones, J. B. “Ultrasonic Welding - A New Technique Grows,” Metal Progress 23 (4) 1958 68 72
- “New Welding Methods Join Exotic Metals,” Chemical Engineering 66 21 October 19 1959 222 226
- Collins, F. R. Dowd, J. D. Brennecke, M. W. “Ultrasonic Welding of Aluminum,” 38 (10) 1959 969 975
- Vill, V. I. “Welding of Metals by Friction,” Svarochnoe Proizvodstvo 9 1957 19 23
- Kunis, M. I. Korablev, A. I. “A Friction Welding Machine on the Base of a Lathe,” Svarochnoe Proizvodstvo 11 1958 37 38
- Niemann, J. T. Sopher, R. P. Rieppel, P. J. “Diffusion Bonding Below 1000 F,” Welding Journal 37 (8) 1958 337-s 343-s
- Final Letter Report Wright Air Development Center December 1959
- Clark, E. J. “Vacuum Diffusion Joining of Titanium,” Welding Journal 38 (6) 1959 251-s 259-s
- DeCecco, N. A. Parks, J. M. “The Brazing of Titanium,” Welding Journal 32 (11) 1953 1071 1081
- Losco, E. F. Fischer, R. L. Saunders, N. T. Wolfe, R. A. “Plate-Type U0 2 -Bearing Fuel Elements for the PWR Core 2 Blanket,” Westinghouse Electric Corp., Atomic Power Division, Pittsburgh, Pa., Paper No. 14 133 135
- Feduska, W. “An Evaluation of the Diffusion Bonding Characteristics of Zircaloy-2,” Welding Journal 38 (7) 1959 289-s 295-s
- Storcheim, S. “Hot Pressure Bonding,” Metal Progress 72 (1) 1957 97 101
- Castleman, L. Seigle, L. “Fundamentals of Diffusional Bonding-1,” Sylvania Electric Products, Inc. Bayside, N. Y. August 1956
- Castleman, L. Seigle, L. “Fundamentals of Diffusional Bonding-II,” Sylvania Electric Products, Inc. Bayside, N. Y. February 1958
- Chesley, W. Cohen, J. B. “Beryllium Joining,” Avco Corporation, Research and Advanced Development Division Wilmington, Mass. May 27 1959
- Greenspan, J. Kaufmann, A. R. “Beryllium Research and Development in the Area of Composite Materials,” Nuclear Metals, Inc. Concord, Mass. December 1958
- Passmore, E. M. “Beryllium Joining,” Avco Corp., Wilmington Mass. June 1959
- Fugardi, J. Zambrow, J. L. “Bonding of Various Metals and Alloys by Isostatic Pressing at Elevated Temperatures,” Sylvania Corning Nuclear Corp. December 1958
- Sloughter, G. M. Patriarca, P. Manly, W. D. “Bonding of Cermet Valve Components to Metals,” Welding Journal 37 (6) 1958 249-s 254-s
- Paprocki, S. J. “Progress on the Use of Gas-Pressure Bonding for Fabrication of Low-Cost Ceramic, Cermet, and Dispersion Fuels,” BMI-1372 1959
- Paprocki, S. J. Hodge, E. S. Carmichel, D. C. “Pressure Bonding of Zircaloy-Clad Flat-Plate Uranium Dioxide Fuel Elements,” Nuclear Metallurgy 5 7 1958
- Paprocki, S. J. Hodge, E. S. Boyer, C. B. “Gas-Pressure Bonding of Fuel Assemblies,” BMI Paper No. 23, Fuel Elements Conference, Gatlinburg, Tenn. May 1958
- Paprocki, S. J. Hodge, E. S. Boyer, C. B. “Preparation of Reactor Components by a Gas-Pressure Bonding Technique,” BMI paper presented at Second International Conference on the Peacetime Uses of Atomic Energy, Geneva, Switzerland September 1958
- Young, A. P. Schwartz, C. M. “Electron Microscopical Examination of Bonds in Zircaloy-2,” BMI-1364 July 1959
- Saller, H. A. Dickerson, P. F. Carlson, R. J. “The Tensile Strength of Solid-State Bonded Aluminum and Nickel-Plated Uranium,” BMI-956 October 1954
- Gerken, J. M. “Diffusion Bonding of Zircaloy to Stainless Steel Tubing,” General Electric Company, Knolls Atomic Power Laboratory Schenectady, N. Y.
- Gage, R. M. “Principles of Modern Arc Torch,” Welding Journal 38 (10) 1959 959 962
- Giannini, G. M. “The Plasma Jet,” Scientific American 8 1957 80 88
- Gage, R. M. “Arc Torch and Process,” September 10 1957
- Yenni, D. M. “High Pressure Arc Process and Apparatus,” August 12 1958