This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A STATUS REPORT ON GEAR LUBRICATION
Annotation ability available
Sector:
Language:
English
Abstract
Authors
Topic
Citation
HAVELY, T., "A STATUS REPORT ON GEAR LUBRICATION," SAE Technical Paper 590341, 1959, https://doi.org/10.4271/590341.Also In
References
- Dudley D. W. “Practical Gear Design” McGraw-Hill Book Co. 1954
- Borsoff V. N. Accinelli J. B. Cattaneo A. G. “The Effect of Oil Viscosity on the Power Transmitting Capacity of Spur Gears” Trans. ASME 73 1951 687 694 696
- Merritt H. E. “Design Criteria of Tooth Stress Conditions” Paper No. 7 International Conference on Gearing Spetember 1958 London
- Way S. “Pitting of Gears Due to Rolling Contact” Trans. ASME 57 1935 A-49
- Davidson T. F. Ku P. M. “The Effect of Lubricants on Gear Tooth Fatigue” ASLE Trans. 1 1958 40
- Anderson W. T. Carter T. L. “Effect of Lubricant Viscosity and Type on Ball-Bearing Fatigue” ASLE Trans. 1 1958 266
- Rebinder P. A. Likhtman V. I. Doklady Akademii Nauk USSR 56 1947 723 Karpenko G. V. “Influence of Surface Active Substances on the Fatigue on Steel” Henry Brutcher translation No. 2604
- Ryder E. A. “The Gear Rig as an Oil Tester” Lubrication Engineering 15 1959 318
- Hughes J. R. Waight F. H. “The Lubrication of Spur Gears” Paper No. 29 International Conference on Gearing September 1958 London
- Ku P. M. Baber B. B. “The Effects of Lubricants on Gear Tooth Scuffing” Paper No. 59GS-4 ASLE Gear Symposium January 1959
- Borsoff V. N. “On the Mechanism of Gear Lubrication” Trans. ASME, J. of Basic Engr 81 D 1959 79
- Martin H. M. “The Lubrication of Gear Teeth” Engineering 102 1916 119
- Gatcombe E. K. “Lubrication Characteristics of Involute Spur Gears” Trans. ASME 67 1945 177
- Hersey M. D. Lowdenslager D. B. “Film Thickness Between Gear Teeth” Trans. ASME 72 1950 1035
- Borsoff V. N. Younger F. C. “Scoring and Wear of Spur Gears” Lubrication Engineering 9 1953 259
- Borsoff V. N. “Weat Studies with Radioactive Gears” Lubrication Engineering 12 1956 224
- McEwen E. “The Effect of Variation of Viscosity with Pressure on the Load-Carrying Capacity of the Oil Film Between Gear Teeth” J. Inst. Pet. 38 1952 646
- Cameron A. “Hydrodynamic Theory in Gear Lubrication” J. Inst. Pet. 38 1952 614
- Poritsky H. “Lubrication of Gear Teeth Including the Effect of Elastic Displacement” ASLE Symposium on the Fundamentals of Friction and Lubrication in Engineering Chicago September 1952
- Blok H. a discussion of several papers on the lubrication of gears J. Inst. Pet. 38 1952 673
- Cameron A. “Surface Failure in Gears” J. Inst. Pet. 40 1954 191
- O'Donnell G. J. “Viscoelasticity and Its Implication in Lubrication” Symposium on Lubrication and Viscoelasticity of the ASME New York November 1958
- Burton R. A. “An Analytical Investigation of Viscoelastic Effects in the Lubrication of Rolling Contact” ASLE Paper 59LC-1 ASLE-ASME Lubrication Conference New York October 1959
- Blok H. “The Surface Temperatures Under Extreme Pressure Lubrication Conditions” Second World Petroleum Congress Paris 1937
- Blok H. “Measurement of Temperature Flashes on Gear Teeth Under Extreme Pressure Conditions” Inst. Mech. Engrs., General Discussion on Lubrication 2 1937 14
- Blok H. “Theoretical Study of Temperature Rise at Surfaces of Actual Contact Under Oiliness Lubricating Conditions” Inst. Mech. Engrs., General Discussion on Lubrication 2 1937 227
- Blok H. “Seizure-Delay Method for Determining the Seizure Protection of EP Lubricants” SAE Journal 44 1939 193
- Jaeger J. C. “Moving Sources of Heat and the Temperature at Sliding Contacts” Proc. Roy. Soc. (New South Wales) 76 1942 203
- Lane T. B. “Scuffing Temperatures of Boundary Lubricant Films” British J. App. Physics 1 Physics of Lubrication 1951 35
- Lane T. B. Hughes J. R. “A Practical Application of the Flash Temperature Hypothesis to Gear Lubrication” Proc. 3rd World Petroleum Congress 1951 320
- Kelley B. W. “A New Look at the Scoring Phenomena of Gears” SAE Trans. 61 1953 175
- Davies W. J. “Some Aspects of the Loading of Gears and Rolling Bearings” British Gear Mfgrs. Assn. Paper 15/5/1956 1956
- Almen J. O. “Surface Deterioration of Gear Teeth” Summer Conference on Mechanical Wear June 1948 Mechanical Wear January 1950 American Soc. for Metals 229
- Almen J. O. “Dimensional Value of Lubricants in Gear Design” SAE J. 50 1942 373
- Shipley E. E. “Design and Testing Consideration of Lubricants for Gear Applications” Lubrication Engineering 14 1958 148
- Niemann G. Rettig H. “Errors Included by Dynamic Gear Tooth Loads” Paper No. 20 International Conference on Gearing September 1958 London
- Waterworth N. “Effects of Deflection of Gears and Their Supports” Paper No. 22 International Conference on Gearing September 1958 London
- Tuplin W. A. “Dynamic Loads on Gear Teeth” Paper No. 17 International Conference on Gearing 1958 London
- Powell D. L. Barton H. R. “Analytical Study of Surface Loading and Sliding Velocity of Automotive Hypoid Gears” ASLE Gear Symposium January 1959
- Braley W. W. Berg M. S. “Design and Service Experience with United States Naval Gears” Paper No. 3 International Conference on Gearing September 1958 London
- Page H. H. “Advances in Loading of Main Propulsion Gears” Paper No. 10 International Conference on Gearing September 1958 London
- Deffenbaugh J. L. “Gear Tooth Surface Failures in Off-Highway Vehicles” Paper No. 26 International Conference on Gearing September 1958 London
- Cleare G. V. “Gear Tooth Failure in Highly Stressed Transmission Gears” Paper No. 1 International Conference on Gearing September 1958 London
- Towle A. “Some Problems in Lubrication and the Substances called Additives” Proceedings of the Automobile Division of the Inst. Mech. Engrs. 2 1954-55 57
- Smalheer C. V. Mastin T. W. “Lubricant Additives and Their Actions” J. Inst. Pet. 42 1956 337
- Borsoff N. V. “Wear of Gears” Wear Symposium of ASME Philadelphia March 1959
- Davey W. “Extreme Pressure Lubrication” Scientific Lubrication 7 1955 23
- Loeser E. H. Twiss S. B. “Analysis of Films Formed by Radioactive EP Additives” Lubrication Engineering 14 1958 343
- Campbell R. B. “Sulfur as an EP Agent” Proceedings of the Inst. Mech. Engrs., Conference on Lubrication and Wear October 1957 London
- Bowden F. P. Menter J. W. “The Friction and Lubrication of Solid Surfaces” J. Inst. Pet. 42 1956 301
- Scanley C. S. Larsen R. “The Performance of Zinc Dithiophosphate as a Lubricating Oil Additive” SAE Paper No. 107C November 1958 Tulsa
- Hunstad N. A. “General Motors Looks at Rear Axle Lubricants - September 1957” 55th Annual Mtg National Petroleum Assoc. Atlantic City September 1957
- Bassett W. B. “Some Additional Characteristics of the New Multi-purpose Gear Lubricant” 55th Annual Mtg National Petroleum Assoc. Atlantic City September 1957
- Johnson W. A. “Some Thoughts on Automotive Gear Lubrication” 55th Annual Mtg National Petroleum Assoc. Atlantic City September 1957
- Nelson R. K. “High Horsepower and High Torque Performance of EP Gear Lubricants” Paper No. 59EF-13 ASLE, Gear Symposium Chicago January 1959
- “Scuffing Tests for Gear Oils” J. Inst. Pet. 43 1957 230
- Hughes J. R. Tourret R. “Mechanical Testing of Gear Lubricants” Engineering 175 1953 200 257
- Ryder E. A. “A Test for Aircraft Gear Lubricants” ASTM Bulletin 184 1952 41
- Morris J. “Development of a Gear and Spline Lubricant Tester” WADC Tech. Rep. No. 54-37 1954
- Shipley E. E. “Investigation of Factors Affecting High-Temperature Gear Operation” Lubrication Engineering 15 1959 98
- Coordinating Research Council, Inc. Handbook 1946
- CRC “Development of Test Technique for Determining Load-Carrying, Wear, and Extreme Pressure Characteristics of Gear Lubricants in Axles, Under Conditions of High Speed, Low Torque Operation, Followed by Low Speed, High Torque Operation” March 9 1956 February 1957 Coordinating Research Council, Inc.
- CRC “Development of Research Technique for Determining Load-Carrying and Extreme Pressure Characteristics of Universal Gear Lubricants in Axles Under Conditions of High Speed and Shock Loading” October 7 1957 January 2 1958 Coordinating Research Council, Inc.
- Van Zandt R. P. Kelley B. W. “Gear Testing Methods for the Development of Heavy Duty Gearing” SAE Quarterly Trans. 3 1949 354
- Maurer G. P. “Recent Developments in the Lubrication of Heavy Duty Gearing” Lubrication Engineering 15 1959 360
- Dern J. W. “Lubrication Problems in High Speed Gears” Lubrication Engineering 15 1959 23
- Rothrock G. L. “Dynamometer Testing of Gears in a Normal Environment” SAE Journal February 1957
- DeArdo A. J. Sargent L. B. “A Laboratory Method for Extreme Pressure Gear Lubricants” Lubrication Engineering 15 1959 367
- El-Sisi S. I. Shawki G. S. A. “Performance Characteristics of Lubricating Oil Films Between Disks” ASME 1958 Annual Meeting Paper No. 58A-254
- Crook A. W. “The Lubrication of Rollers” Phil. Trans. Roy. Soc. A 250 1958
- Jackson E. G. Muench C. F. Scott E. H. “Evaluation of Gear Materials Scoring at 700°F” ASLE-ASME Lubrication Conference October 1959 New York
- Watson H. J. “Testing of Marine Main-Propulsion-Gear Lubricants in Disk Machines” Proceedings of the Inst. Mech. Engrs. Conference on Lubrication and Wear October 1957 London