This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
FUNDAMENTAL STUDIES RELATED TO SPARK PLUG DEPOSITS
Annotation ability available
Sector:
Language:
English
Abstract
To learn about ways of controlling spark plug fouling, research was done in three areas: (1) chemical and physical properties of spark plug deposits, (b) development of an instrument to measure a basic physical property, viz. insulator leakage resistance, as a criterion of spark plug fouling, and (c) engine tests simulating car road performance and aiding the other studies.
Ease of deposit fusibility was found to correlate with low resistance and a high degree of fouling. Electron microscopic examination showed that fusibility varied with the area of the ceramic insulator on which the deposit was laid and with the grain structure in a given area. Lead halides are most undesirable in this respect.
Spark plugs whose leakage resistances were less than one megohm at normal engine operating temperatures were generally fouled. The corresponding resistances of new plugs were usually around 1000 megohms. Resistances were measured both on plugs in the running engine and on plugs that had been removed from an engine and were placed in a hot inert atmosphere.
Engine tests gave a measure of plug fouling in terms of power loss on acceleration. In the course of this work it was observed that greatly fouled plugs could be responsible for unusually high octane requirements.
As a result of these studies means of spark plug fouling control by variation in fuel composition have been suggested.
Recommended Content
Authors
Citation
LAUER, J., FRIEL, P., and MILLER, R., "FUNDAMENTAL STUDIES RELATED TO SPARK PLUG DEPOSITS," SAE Technical Paper 580108, 1958, https://doi.org/10.4271/580108.Also In
References
- “Factors Influencing Spark Plug Operation.”
- Greenshields, R. J. “Spark Plug Fouling Studies.” SAE Transactions 61 3 13 1953
- Hall, C. A. Beaubier, R. C. Marckwardt, E. C. Courtney, R. L. “Spark Plug Fouling, A Survey-Test Procedures-Fuel Factors.” Presented at the SAE Annual Meeting Detroit January 1957
- Lamb, F. W. “Postulated Mechanism of Spark Plug Fouling.” Presented at the Aircraft Spark Plug and Ignition Conferences, Champion Spark Plug Company Toledo, Ohio October 1954
- Lamb, F. W. Niebylski, Leonard M. “Formation of Engine-Deposit Compounds by Solid-State Reactions.” Analytical Chemistry 23 1388 97 October 1951
- Yust, V. E. Droegemueller, E. A. “Aviation Spark Plug Fouling.” Part I - “Its Control by Tricresyl Phosphate.” Part II - “Its Major Cause, Metallic Lead.” SAE Journal 1952 65 May 37 June