This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Application of Metallic Materials for Aircraft Structures in the Temperature Range 600 to 1100 F
Annotation ability available
Sector:
Language:
English
Abstract
A BRIEF review is presented of a portion of the available strength property data for a few representative alloys which find use in airframe structural components in the range from 600 to 1100 F. Several modes of behavior are illustrated, and some general principles regarding the interpretation and use of said data for design purposes are discussed.
Citation
Huffman, J., "Application of Metallic Materials for Aircraft Structures in the Temperature Range 600 to 1100 F," SAE Technical Paper 560002, 1956, https://doi.org/10.4271/560002.Also In
References
- International Nickel Co., Inc. “Inconel X,” January 1949
- Universal-Cyclops Steel Corp. “Super Alloys, Physical Properties and Processing Data,” 1954
- Air Force Report, AFTR 6517 “Determination of Physical Properties of Ferrous and Nonferrous Structural Sheet Materials at Elevated Temperatures,” December 1952
- Armco Steel Corp. “Technical Data Manual — Armco Precipitation Hardening Stainless Steels,” Feb. 15 1954
- North American Aviation Report, NA-48-1316 “High-Temperature Properties of Low-Alloy Steels,” Dec. 3 1948
- North American Aviation Report, NA-47-825 “Short-Time Tensile Properties of Low-Alloy Steels at Elevated Temperatures,” Oct. 15 1947
- Universal-Cyclops Steel Corp. “Technical Data on Uniloy 19-9DX,” Oct. 26 1953
- North American Aviation “Mechanical Properties of RC-130A” Engineering Research Project CP 2253
- Rem-Cru Titanium Inc. “Rem-Cru Titanium Manual,” 1954
- Alleghany Ludlum Steel Corp. “Technical Data on Alleghany Ludlum Alloy A286,” Jan. 9 1952
- ASTM-ASME Aviation Panel Project AP-2 Report “Exploratory Investigation on High-Temperature Sheet Materials,” Nov. 13 1951
- United States Steel Corp. Report No. 623 “Strength of Two Hardened Alloy Steels in the Temperature Range 75 to 700 F,” August 1949
- Naval Air Material Center Philadelphia Report No. AML NAM AE 411022 “Investigation of the Properties of Steels at Intermediate Temperatures,” January 1950
- Brown, W. F. Jr Jones, M. H. Newman, D. P. “Influence of Sharp Notch on the Stress-Rupture Characteristics of Heat-Resisting Alloys: Part II,” Proceedings, ASTM Vol. 53 1953
- ASTM Special Technical Publication No. 128 “Symposium on Strength and Ductility of Metals at Elevated Temperatures with Particular Reference to Effects of Notches and Metallurgical Changes,” June 23 1952
- Armour Research Foundation Report No. 50 “Determination of Physical Properties of Ferrous and Nonferrous Structural Sheet Materials at Elevated Temperatures,” Sept. 24 1954
- Universal-Cyclops Steel Corp. “Data Sheets on 19-9DL,” Aug. 7 1944
- Hoyt, S. L. “Metal Data,” Reinhold, New York 1952
- Wright Air Development Center Technical Report 52-325 “Elevated-Temperature Fatigue Properties of SAE 4340 Steel,” December 1952
- Dolan, T. J. “Past Work on Fatigue of Metals in the High-Temperature Field,” University of Illinois June 1950
- Cornell University “Investigation of Compressive, Bearing, and Shear Creep-Rupture Properties of Aircraft Structural Metals at Elevated Temperatures”
- North American Aviation “Room-Temperature Mechanical Properties of Metals after Prolonged Heating,” Engineering Research Project CP 3122
- North American Aviation Report No. NA-54-358 “Stability of Steels and Heat-Resistant Alloys at Elevated Temperatures,” April 1 1954
- Crucible Steel Co. of America Data Sheet “Resistal 422 Stainless Steel,” February 1952
- North American Aviation Report No. NA-48-1386 “Elevated-Temperature Shear Properties of AISI 4130 Steel and AISI 302 Stainless Steel,” Dec. 23 1948
- North American Report No. NA-52-854 “Corrosion-Resistant Steel Sheet, Bearing Strengths,” Aug. 18 1954
- International Nickel Co. “Nickel Alloy Steels,” second edition
- North American Aviation, Engineering Research Project CP 3120 “Creep-Rupture Properties of 17-7PH”
- Alleghany Ludlum Steel Corp. “Data Sheets, Special Steels — Tool, Stainless, Electrical.”