This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Investigation of Wire EDM Machining Parameters on Duplex Stainless Steel Using ANOVA and RSM
Technical Paper
2022-28-0535
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The research aims to optimize the surface roughness, material removal rate (MRR), tool wear, and spark gap for input machining parameters such as Pulse on-off time and wire feed rate. The experiment results of WEDM of Duplex stainless steel are optimized by ANOVA and Response surface methodology (RSM) approach. Taguchi’s orthogonal array L9 (3*3) was used to design the test condition for the experiment. After the model validation, ANOVA was used to identify the most significant input factor on the output. Response surface methodology was used to find the ideal cutting conditions which produce the best-desired output in terms of less tool wear, lower surface roughness, lower spark gap, and higher material removal rate. The optimal MRR, Spark Gap, surface roughness, and tool wear parameters for Duplex Stainless Steel are obtained at Pulse on 110.23, Pulse off time of 56.0, and a wire feed rate of 1.0. The proposed RSM model is significant and suited for all machining conditions due to the increased R2 value. The experiments show that the suggested approach in this study increases the machining performance of the WEDM process.
Authors
Citation
A Modi, V., Govindasamy, R., Krishnasamy, P., Kumar, P. et al., "Investigation of Wire EDM Machining Parameters on Duplex Stainless Steel Using ANOVA and RSM," SAE Technical Paper 2022-28-0535, 2022, https://doi.org/10.4271/2022-28-0535.Also In
References
- Pohl , M. , Storz , O. , and Glogowski , T. Effect of Intermetallic Precipitations on the Properties of Duplex Stainless Steel Materials Characterization 58 1 2007 65 71 10.1016/j.matchar.2006.03.015
- Moura , V.S. , Lima , L.D. , Pardal , J.M. , Kina , A.Y. et al. Influence of Microstructure on the Corrosion Resistance of the Duplex Stainless Steel UNS S31803 Materials Characterization 59 8 2008 1127 1132 10.1016/j.matchar.2007.09.002
- lvarez-Armas I. Duplex Stainless Steels: Brief History and Some Recent Alloys Entham Science Publishers 1 2008 51 57
- Liljas , M. , Johansson , P. , Liu , H.P. , and Olsson , C.O.A. Development of a Lean Duplex Stainless Steel Steel Research International 79 6 2008 466 473 10.2374/SRI08SP043-79-2008-466
- Abas , R.H.A. and Taieh , N.K. Experimental Study of the Thermal Diffusivity and Heat Capacity Concerning Some Duplex Stainless Steel Al-Khwarizmi Engineering Journal 11 2 2015 51 61
- Charles , K. Duplex Stainless Steel in the Pulp and Paper Industry Anti-Corrosion Methods and Materials 44 1997 1 7
- Nilsson , J.O. and Wilson , A. Influence of Isothermal Phase Transformations on Toughness and Pitting Corrosion of Super Duplex Stainless Steel SAF 2507 Materials Science and Technology 9 7 1993 545 554 10.1179/mst.1993.9.7.545
- Rajaguru , J. and Arunachalam , N. Investigation on Machining Induced Surface and Subsurface Modifications on the Stress Corrosion Crack Growth Behaviour of Super Duplex Stainless Steel Corrosion Science 141 2018 230 242 10.1016/j.corsci.2018.07.012
- Chail , G. and Kangas , P. Super and Hyper Duplex Stainless Steels: Structures, Properties and Applications Procedia Structural Integrity 2 2016 1755 1762 10.1016/j.prostr.2016.06.221
- Mészáros , I. and Bögre , B. Microstructural and Magnetic Investigations of Duplex Steel IOP Conference Series: Materials Science and Engineering 426 2018 012034 10.1088/1757-899X/426/1/012034
- Gunn , Robert N. Duplex Stainless Steels Microstructure, Properties and Applications
- Chai , G. and Kangas , P.
- New , H.O.W.A. et al.
- Verma , J. and Taiwade , R.V. Effect of Welding Processes and Conditions on the Microstructure, Mechanical Properties and Corrosion Resistance of Duplex Stainless Steel Weldments—A Review Journal of Manufacturing Processes 25 2017 134 152 10.1016/j.jmapro.2016.11.003
- Chakraborty , S. , Dey , V. , and Ghosh , S.K. A Review on the Use of Dielectric Fluids and Their Effects in Electrical Discharge Machining Characteristics Precision Engineering 40 2015 1 6 10.1016/j.precisioneng.2014.11.003
- Leão , F.N. and Pashby , I.R. A Review on the Use of Environmentally-Friendly Dielectric Fluids in Electrical Discharge Machining Journal of Materials Processing Technology 149 1–3 2004 341 346 10.1016/j.jmatprotec.2003.10.043
- Che Haron , C.H. , Ghani , J.A. , Burhanuddin , Y. , Seong , Y.K. et al. Copper and Graphite Electrodes Performance in Electrical-Discharge Machining of XW42 Tool Steel Journal of Materials Processing Technology 201 1–3 2008 570 573 10.1016/j.jmatprotec.2007.11.285
- Paro , J. , Hänninen , H. , and Kauppinen , V. Tool Wear and Machinability of HIPed P/M and Conventional Cast Duplex Stainless Steels Wear . 249 3–4 2001 279 284 10.1016/S0043-1648(01)00570-1
- Ablyaz , T.R. , Shlykov , E.S. , Muratov , K.R. , Mahajan , A. et al. Surface Characterization and Tribological Performance Analysis of Electric Discharge Machined Duplex Stainless Steel Micromachines 11 10 2020 926 10.3390/mi11100926
- Mahajan , A. , Sidhu , S.S. , and Devgan , S. Examination of Hemocompatibility and Corrosion Resistance of Electrical Discharge-Treated Duplex Stainless Steel (DSS-2205) for Biomedical Applications Applied Physics A 126 9 2020 737 10.1007/s00339-020-03940-5
- Dwivedi , A.P. and Choudhury , S.K. Effect of Tool Rotation on MRR, TWR, and Surface Integrity of AISI-D3 Steel Using the Rotary EDM Process Materials and Manufacturing Processes 31 14 2016 1844 1852 10.1080/10426914.2016.1140198
- Bobbili , R. , Madhu , V. , and Gogia , A.K. Effect of Wire-EDM Machining Parameters on Surface Roughness and Material Removal Rate of High Strength Armor Steel Materials and Manufacturing Processes 28 4 2013 364 368 10.1080/10426914.2012.736661
- Derringer , G. and Suich , R. Simultaneous Optimization of Several Response Variables Journal of Quality Technology 12 4 1980 214 219 10.1080/00224065.1980.11980968