This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Experimental Investigation on the Tensile and Wear Characteristics of Journal Bearing Materials Used in Automobile Engine Application
Technical Paper
2022-28-0518
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The objective of the bearing materials is to reduce the friction and enhance the movement between two parts. The main aim of our project is to focus on the wear, tensile and fatigue characteristics of engine journal bearing material. The engine bearings are mainly classified into main bearings and journal bearings. The journal bearing material was made by cladding process. It is formed in two types of shape one is circular and the other is on dog bone shape. Both of the specimens were made as per ASTM standards. The material on which the test specimen was made on steel platted copper material and Aluminium 1020. The circular shape specimen was subjected to wear test on Pin on Disc method and the wear calculations were calculated in microns. The dog bone shape specimen was tested on tensile strength on Universal Testing Machine (UTM). The stress strain curve was obtained. The specimen will subject to fatigue test by using of fatigue test machines. Engine journal bearing materials subjected to do fatigue and microstructure analysis. The outcome of that project is to compare the results from the above tests and find out life of the bearings under all the above-mentioned conditions
Authors
- Sadhasivam Deepan Kumar - Bannari Amman Institute of Technology
- Sivananth V - University of Technology and Applied Sci
- Tamilselvan A - Bannari Amman Institute of Technology
- Nagarajan Praveenkumar - Dr. Mahalingam College of Engg and Tech.
- Arulkumar S - Dr. Mahalingam College of Engg and Tech.
- Saravanan Boobalan - Bannari Amman Institute of Technology
Citation
Deepan Kumar, S., V, S., A, T., Praveenkumar, N. et al., "Experimental Investigation on the Tensile and Wear Characteristics of Journal Bearing Materials Used in Automobile Engine Application," SAE Technical Paper 2022-28-0518, 2022, https://doi.org/10.4271/2022-28-0518.Also In
References
- Truhan , J.J. et al. A Rig Test to Measure Friction and Wear of Heavy Duty Diesel Engine Piston Rings and Cylinder Liners Using Realistic Lubricants Tribology International 38 3 2005
- Ting , L.L. et al. Piston Ring Lubrication and Cylinder Bore Wear Analysis, Part I—Theory Journal of Lubrication Tech 96 3 1974 305 313
- Belmondo , A. et al.
- Skopp , A. et al. Thermally Sprayed Titanium Suboxide Coatings for Piston Ring/Cylinder Liners under Mixed Lubrication and Dry-Running Conditions Federal Institute for Materials Research and Testing (BAM) Berlin, Germany
- Friedrich , C. et al. PVD CrxN Coatings for Tribological Application on Piston Rings Institut für Werkstoffkunde, Technische Hochschule Darmstadt Darmstadt, Germany
- Olander , P. et al. Piston Ring and Cylinder Liner Wear Aggravation Caused by Transition to Greener Ship Transports–Comparison of Samples from Test Rig and Field Wear of Materials 302 1–2 2013 1345 1350
- Obert , P. et al. The Influence of oil Supply and Cylinder Liner Temperature on Friction, Wear and Scuffing Behavior of Piston Ring Cylinder Liner Contacts – A New Model Test Tribology International 94 2016 306 314
- Andersson , P. et al. A New Tribometer for Piston Ring Friction Measurements Tribology Series 41 2003 501 510
- Yoo , D.H. , Hong , K.S. , Hong , T.E. , Eastman , J.A. et al. Thermal Conductivity of Al2O3/Water Nanofluids Journal of the Korean Physical Society 51 1 2007
- Casati , R. and Vedani , M. Metal Matrix Composites Reinforced by Nano-Particles—A Review Metals 4 1 2014 65 83
- Radhika , N. , Vaishnavi , A. , and Chandran , G. Optimisation of Dry Sliding Wear Process Parameters for Aluminium Hybrid Metal Matrix Composites Tribology in Industry 36 2 2014
- Krishnakumar , K. and Arockia Selvakumar , A. Enhancement of Fatigue Strength on SAE 1541 Steel Link Plate with Slip Ball Burnishing Technique Defence Science Journal 70 4 2020 454 460
- Kumar , V.V. , Raja , K. , Chandra Sekar , V.S. , and Ramkumar , T. Thrust Force Evaluation and Microstructure Characterization of Hybrid Composites (Al7075/B4C/BN) Processed by Conventional Casting Technique Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 2019 214 228
- Kumar , V. , Raja , K. , Chandrasekaran , K. , and Ramkumar , T. Effect on the Behaviour of Dynamic Mechanical Analysis for Hybrid Epoxy/BN Metal Matrix Composites Prepared by Conventional Casting Method Materials Research Express 6 2019 6
- Allmaier , H. , Priestner , C. , Sander , D.E. , and Reich , F. Friction in Automotive Engines Pihtili , H. Tribology in Engineering Intech 2013 149 184
- Sander , D.E. 2016
- Rajamurugan , G. , Deepankumar , S. , Ramakrishnan , A. , Krishnasamy , P. et al. Corrosion Characteristics on Friction Stir Welding of Dissimilar AA2014/AA6061 Alloy for Automobile Application SAE Technical Paper 2019-28-0063 2019 https://doi.org/10.4271/2019-28-0063
- Kumar , D. Design and Fabrication of Vehicle Rollover Prevention System by Counter Steering Mechanism in Automobile SAE Technical Paper 2021-28-0155 2021
- Kumar , D. An Investigation on Corrosion and Wear Behavior of Automotive Materials SAE Technical Paper 2021-28-0238 2021
- Kumar , D. Design and Analysis of a Muffler for Engine Exhaust Noise and Heat Reduction SAE Technical Paper 2021-28-0128 2021
- Kumar , D. Design and Analysis with Optimization of Car Radiators Using Nanofluids Advanced Manufacturing Systems and Innovative Product Design 2021 33 46
- Kumar , D. Experimental Exploration of a Reflex Leveler Prototype Using Gyro Sensor Materials Today: Proceedings 45 2021 P1280 P1284
- Kumar , D. The Result of Nano-Additives in Diesel Engine using Diesel-E Waste Plastics Pyrolysis Oil Fuel Blends: A Review IOP Conference Series: Materials Science and Engineering