This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Optimization and Analysis of Temperature Distribution in Monel-Copper Joints in Rotary Friction Welding
Technical Paper
2022-26-0005
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
AeroCON 2022
Language:
English
Abstract
Rotary friction Welding (RFW) has wide application in the aerospace industry for manufacturing large volume fuel tanks due to its exceptional advantages, including low distortion, less defects, and high mechanical joint properties. The weld interface quality is limited to poor temperature distribution, improper frictional pressure, and time to weld. The present study is to optimize the friction welding parameters of the Monel-Copper joint by rotary friction welding such as frictional pressure (20bar, 25bar, 30bar, and 35bar), upset pressure (15bar, 20bar, 25bar, and 30bar), and frictional time (5 sec, 7sec, 9sec, and 11sec). The friction temperatures of the weld joints are noted during the welding process. The input process parameters have been optimized by design of experiment and analysed by the ANOVA method. The temperature and pressure distribution of the weld joints are evaluated by finite element analysis software.
Authors
Citation
S, M., K.R, B., and J, C., "Optimization and Analysis of Temperature Distribution in Monel-Copper Joints in Rotary Friction Welding," SAE Technical Paper 2022-26-0005, 2022, https://doi.org/10.4271/2022-26-0005.Also In
References
- Tylecote , R.Y. The Solid Phase Welding of Metals London Edward Arnold (Publisher) Ltd. 1968 1 150
- Vill , V.I. Friction Welding of Metals American Welding Society New York 1962
- Kırık , I. , Ozdemir , N. , and Sarsılmaz , F. Microstructure and Mechanical Behavior of Friction Welded AISI 2205/AISI 1040 Steel Joints Mater Test 10 2012 683 687
- Kumar , R. and Balasubramanian , M. Experimental Investigation of Ti-6Al-4V Titanium Alloy and 304L Stainless Steel Friction Welded with Copper Interlayer Defence Technology 11 2015 65 75 10.1016/2014-10-001
- Shanjeevi , C. , Sathiskumar , S. , and Sathiya , P. Evaluation of Mechanical and Metallurgical Properties of Dissimilar Materials by Friction Welding Procedia Engineering 64 2013 1514 1523 10.1016/2013-09-233
- Muralimohan , C.H. , Haribabu , S. , Hariprasadareddy , Y. , and Muthupandi , V. Evaluation of Microstructures and Mechanical Properties of Dissimilar Materials by Friction Welding Procedia Materials Science 5 2014 1107 1113 10.1016/2014-07-404
- Ajith , P.M. , Barik , B.K. , Sathiya , P. , and Aravindan , S. Multi Objective Optimization of Friction Welding of UNS S32205 Duplex Stainless Steel Defence Technology 11 2015 157 165 10.1016/2015-03-001
- Kumar , R. and Balasubramanian , M. Application of Response Surface Methodology to Optimize Process Parameters in Friction Welding of Ti-6Al-4V and SS304L Rods Transactions of Nonferrous Metals Society of China 25 11 2015 3625 3633 10.1016/S1003-6326(15)63959-0
- Selvamani , S.T. and Palanikumar , K. Optimizing the Friction Welding Parameters to Attain Maximum Tensile Strength in AISI 1035 Grade Carbon Steel Rods Measurement 53 2014 10 21 10.1016/2014-03-008
- Pandiarajan , S. , Senthil Kumaran , S. , Kumaraswamidhas , L.A. , and Saravanan , R. Interfacial Microstructure and Optimization of Friction Welding by Taguchi and ANOVA Method on SA 213 Tube to SA 387 Tube Plate without Backing Block using an External Tool Journal of Alloys and Compounds 654 2016 534 545 10.1016/2015.09.152
- Pei-hao , G. , Guo-liang , Q. , Jun , Z. , and Chang-an , L. Parametric Optimization and Microstructural Characterization of Friction Welded Aeronautic Aluminum Alloy 2024 Transactions of Nonferrous Metals Society of China 29 12 2019 2483 2495 10.1016/S1003-6326(19)65156-3
- Sreenivasan , K.S. , Satish Kumar , S. , and Katiravan , J. Genetic Algorithm based Optimization of Friction Welding Process Parameters on AA7075-SiC Composite Engineering Science and Technology, an International Journal 22 2019 1136 1148 10.1016/2019.02.010
- Pandia Rajan , S. , Senthil Kumaran , S. , and Kumaraswamidhas , L.A. An Investigation on Thermal and Friction Effect Produced by Friction Welding of SA 213 Tube to SA 387 Tube Plate Alexandria Engineering Journal 55 2016 101 112 10.1016/2015.12.030
- Absar , S. , Ruszkiewicz , B.J. , Skovron , J.D. , Mears , L. et al. Temperature Measurement in Friction Element Welding Process with Micro Thin Film Thermocouples Procedia Manufacturing 26 2018 485 494 10.1016/2018.07.057
- Akram , J. , Kalvala , P.R. , Jindal , V. , and Misra , M. Evaluating Location Specific Strain Rates, Temperatures, and Accumulated Strains in Friction Welds Through Microstructure Modeling Defence Technology 14 2018 83 92 10.1016/2017.11.002
- Yang , X. , Li , W. , Fu , Y. , Ye , Q. et al. Finite Element Modelling for Temperature, Stresses and Strains Calculation in Linear Friction Welding of TB9 Titanium Alloy Journal of Materials Research and Technology 8 5 2019 4797 4818 10.1016/2019.08.026
- Iracheta , O. , Bennett , C.J. , and Sun , W. A Sensitivity Study of Parameters Affecting Residual Stress Predictionsin Finite Element Modelling of the Inertia Friction Welding Process International Journal of Solids and Structures 71 2015 180 193 10.1016/2015.06.018
- Mohammed Asif , M. , Shrikrishana , K.A. , and Sathiya , P. Finite Element Modelling and Characterization of Friction Welding on UNS S31803 Duplex Stainless Steel Joints Engineering Science and Technology, an International Journal 18 2015 704 712 10.1016/2015.05.002
- Y Suga , Y. , Miyakawa , S. , and Ogawa , K. Estimation of Temperature Distribution in the Friction Weld of Carbon Steel by the Finite Element Method Taylor and Francis 13 2019 262 269 10.1080/09507119909447375
- Kimura , M. , Ohara , K. , Kusala , M. , Kaiza , K. et al. Effect of Tensile Strength on Friction Welding Conditions and Weld Faying Surface Properties of Friction Welded Joints between Pure Copper and Austenitic Stainless Steel Journal of Advanced Joining Processes 2020 1 11 10.1016/j.jajp.2020.10028