This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Validation of an Empirical Disc Brake Model with Full-Vehicle Brake Tests
Technical Paper
2022-01-5082
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
Automotive Technical Papers
Language:
English
Abstract
The brake of a vehicle is of particular importance for vehicle safety. Brake
inspection is an essential part of the periodic technical inspection and
contributes to road safety. The current vehicle brake inspection methods are
mostly tied to brake tester and check the vehicle brake in a workspace that does
not have much practical relevance. Therefore, an attempt is made to develop
dynamic inspection methods for automotive brakes, which are based on driving
tests. To develop these dynamic inspection methods, a vehicle model is used,
which includes an empirical brake model that takes into account the various
dependencies of the coefficient of friction of the friction pairing of
automotive disc brakes. The model is later validated with full-vehicle brake
maneuvers from different velocities and under different conditions and shows
good results.
Authors
Topic
Citation
Schramm, T., König, P., Kubenz, J., and Prokop, G., "The Validation of an Empirical Disc Brake Model with Full-Vehicle Brake Tests," SAE Technical Paper 2022-01-5082, 2022, https://doi.org/10.4271/2022-01-5082.Also In
References
- Bundesministerium für Verkehr, Bau und Stadtentwicklung 2012
- SAE International 2003
- Degenstein , T. , Dohle , A. , Elvenkemper , A. , and Lange , J. 2006
- Eriksson , M. , Bergman , F. , and Jacobson , S. On the Nature of Tribological Contact in Automotive Brakes Wear 252 1-2 2002 26 36 10.1016/S0043-1648(01)00849-3
- Rhee , S. Friction Properties of a Phenolic Resin Filled with Iron and Graphite-Sensitivity to Load, Speed and Temperature Wear 23 2 1974 277 281
- Severin , D. and Musiol , F. Der Reibprozess in trockenlaufenden mechanischen Bremsen und Kupplungen Konstruktion 47 1995 3 59 68
- Burckhardt , M. Fahrwerktechnik Bremsdynamik und PKW-Bremsanlagen: Einzelteile, Auslegung, Berechnung und Volumenhaushalt, Anhängerbetrieb und Anhängerbremsen Würzburg Vogel-Fachbuch Kraftfahrzeugtechnik 1991
- Tsang , P. , Jacko , M.G. , and Rhee , S.K. Comparison of Chase and Inertial Brake Dynamometer Testing of Automotive Friction Materials Wear 103 3 1985 217 232 10.1016/0043-1648(85)90012-2
- Eriksson , M. , Lundqvist , A. , and Jacobson , S. A Study of the Influence of Humidity on the Friction and Squeal Generation of Automotive Brake Pads Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 215 3 2001 329 342 10.1243/0954407011525674
- El-Tayeb , N. and Liew , K.W. On the Dry and Wet Sliding Performance of Potentially New Frictional Brake Pad Materials for Automotive Industry Wear 266 1-2 2009 275 287 10.1016/j.wear.2008.07.003
- Blau , P.J. and McLaughlin , J.C. Effects of Water Films and Sliding Speed on the Frictional Behavior of Truck Disc Brake Materials Tribology International 36 10 2003 709 715 10.1016/S0301-679X(03)00026-4
- Marquart , A. 1992
- Spruss , I. , Schröck , D. , Kuthada , T. , and Wiedemann , J. Aerodynamik als Problemlösung des Nässefadings: Grundlagen, Komponenten, Systeme, Fahrdynamik ATZ - Automobiltechnische Zeitschrift 112 10 2010 730 734
- Mitschke , M. and Braun , H. Das Verhalten von Scheibenbremsen bei Nässe Düsseldorf VDI-Verl 1970
- Bao , J. , Yin , Y. , Lu , L. , and Liu , T. Tribological Characterization on Friction Brake in Continuous Braking ILT 70 1 2018 172 181 10.1108/ILT-09-2016-0205
- DEKRA Automobil GmbH 2022 https://www.dekra-lausitzring.de/