This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Evaluation of Fast Detailed Kinetics Calibration Methodology for 3D CFD Simulations of Spray Combustion
Technical Paper
2022-01-1042
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Meeting strict current and future emissions legislation necessitates development of computational tools capable of predicting the behaviour of combustion and emissions with an accuracy sufficient to make correct design decisions while keeping computational cost of the simulations amenable for large-scale design space exploration. While detailed kinetics modelling is increasingly seen as a necessity for accurate simulations, the computational cost can be often prohibitive, prompting interest in simplified approaches allowing fast simulation of reduced mechanisms at coarse grid resolutions appropriate for internal combustion engine simulations in design context. In this study we present a simplified Well-stirred Reactor (WSR) implementation coupled with 3D CFD Ricardo VECTIS solver. A detailed evaluation of benchmark ECN spray problem is presented demonstrating that a single point calibration of such a model using a bulk reaction multiplier approach can provide correct representation of the solution across a wide range of temperatures on grid sizes typically employed for RANS internal combustion engine simulations with tabulated kinetics or zonal combustion models.
Authors
Topic
Citation
Turquand d'Auzay, C., Shapiro, E., Prouvier, M., Winkler, A. et al., "Evaluation of Fast Detailed Kinetics Calibration Methodology for 3D CFD Simulations of Spray Combustion," SAE Technical Paper 2022-01-1042, 2022, https://doi.org/10.4271/2022-01-1042.Also In
References
- Reitz , R.D. and Duraisamy , G. Review of High Efficiency and Clean Reactivity Controlled Compression Ignition (RCCI) Combustion in Internal Combustion Engines Progress in Energy and Combustion Science 46 2015 12 71
- Papaioannou , N. , Leach , F.C. , Davy , M.H. , Weall , A. et al. Evaluation of Exhaust Gas Recirculation Techniques on a High-Speed Direct Injection Diesel Engine using First Law Analysis Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 233 3 2019 710 726
- Dec , J.E. A Conceptual Model of DI Diesel Combustion based on Laser-Sheet Imaging International Congress & Exposition feb 1997
- Knox , B.W. and Genzale , C.L. Scaling Combustion Recession After End of Injection in Diesel Sprays Combustion and Flame 177 2017 24 36
- Shapiro , E. , Tiney , N. , Kyrtatos , P. , Kotzagianni , M. et al. Experimental and Numerical Analysis of Pre-Chamber Combustion Systems for Lean Burn Gas Engines SAE Technical Paper 2019-01-0260 2019 https://doi.org/10.4271/2019-01-0260
- 2021
- Chishty , M.A. , Bolla , M. , Hawkes , E.R. , Pei , Y. et al. Soot Formation Modelling for N-Dodecane Sprays using the Transported Pdf Model Combustion and Flame 192 2018 101 119
- Reitz , R.D. Directions in Internal Combustion Engine Research Combustion and Flame 160 1 2013 1 8
- D’Errico , G. , Lucchini , T. , Contino , F. , Jangi , M. et al. Comparison of Well-Mixed and Multiple Representative Interactive Flamelet Approaches for Diesel Spray Combustion Modelling Combustion Theory and Modelling 18 1 2014 65 88
- Lucchini , T. , D’Errico , G. , Ettorre , D. , and Ferrari , G. Numerical Investigation of Non-Reacting and Reacting Diesel Sprays in Constant-Volume Vessels SAE International Journal of Fuels and Lubricants 2 Jun 2009 966 975
- Luo , Z. , Som , S. , Mani , S.S. , Plomer , M. et al. Development and Validation of an N-Dodecane Skeletal Mechanism for Spray Combustion Applications Combustion Theory and Modelling 18 2 2014 187 203
- Perlman , C. , Frojd , K. , Seidel , L. , Tuner , M. et al. A Fast Tool for Predictive IC Engine In-Cylinder Modelling with Detailed Chemistry SAE Technical Paper 2012-01-1074 2012 https://doi.org/10.4271/2012-01-1074
- Lehtiniemi , H. , Borg , A. , and Mauss , F. Combustion Modeling of Diesel Sprays SAE Technical Paper 2016-01-0592 2016 https://doi.org/10.4271/2016-01-0592
- https://ecn.sandia.gov/ecn-workshop/
- https://ecn.sandia.gov/ecn-data-search/
- Higgins , B. , Siebers , D.L. , and Aradi , A. Diesel-Spray Ignition and Premixed-Burn Behavior SAE 2000 World Congress, SAE International Mar 2000
- Higgins , B. and Siebers , D.L. Measurement of the Flame Lift-Off Location on DI Diesel Sprays using OH Chemiluminescence SAE 2001 World Congress, SAE International Mar 2001
- Divis , M. , Shapiro , E. , and Einspigel , D. A Novel Discrete Phase Solver for High-Speed Spray Simulations in Industrial Applications ILASS Europe September 2019
- Contino , F. , Jeanmart , H. , Lucchini , T. , and D’Errico , G. Coupling of in Situ Adaptive Tabulation and Dynamic Adaptive Chemistry: An Effective Method for Solving Combustion in Engine Simulations Proceedings of the Combustion Institute 33 2 2011 3057 3064
- Contino , F. , Lucchini , T. , D’Errico , G. , Duynslaegher , C. et al. Simulations of Advanced Combustion Modes using Detailed Chemistry Combined with Tabulation and Mechanism Reduction Techniques SAE International Journal of Engines 5 Apr 2012 185 196
- Som , S. and Aggarwal , S. Effects of Primary Breakup Modeling on Spray and Combustion Characteristics of Compression Ignition Engines Combustion and Flame 157 6 2010 1179 1193
- Yang , X. , Solomon , A. , and Kuo , T.-W. Ignition and Combustion Simulations of Spray-Guided Sidi Engine using Arrhenius Combustion with Spark-Energy Deposition Model SAE 2012 World Congress & Exhibition, SAE International Apr 2012
- Przulj , V. and Basara , B. A Simple-Based Control Volume Method for Compressible Flows on Arbitrary Grids 32nd AIAA Fluid Dynamics Conference and Exhibit 1 11 2002
- Przulj , V. A Generalised Convergence Accelerated Pressure-Based Segregated Algorithm 6th European Conference on Computational Fluid Dynamics Onate , J.O.E. and Huerta , A. Barcelona, Spain 20-25 July 2014
- Rhie , C.M. and Chow , W.L. Numerical Study of the Turbulent Flow Past an Airfoil with Trailing Edge Separation AIAA Journal 21 11 1983 1525 1532
- VECTIS VSOLVE User Manual Version 2020.4
- Yao , T. , Pei , Y. , Zhong , B.-J. , Som , S. et al. A Compact Skeletal Mechanism for N-Dodecane with Optimized Semi-Global Low-Temperature Chemistry for Diesel Engine Simulations Fuel 191 2017 339 349
- Sarathy , S. et al. Comprehensive Chemical Kinetic Modeling of the Oxidation of 2-Methylalkanes from C7 to C20 Combustion and Flame 158 12 2011 2338 2357
- You , X. , Egolfopoulos , F.N. , and Wang , H. Detailed and Simplified Kinetic Models of N-Dodecane Oxidation: The Role of Fuel Cracking in Aliphatic Hydrocarbon Combustion Proceedings of the Combustion Institute 32 1 2009 403 410
- Wang , H. et al. http://ignis.usc.edu/Mechanisms/USC-Mech
- Cai , L. et al. Reduced and Optimized Mechanism for N-Dodecane Oxidation 15th International Conference on Numerical Combustion April 2015
- Narayanaswamy , K. , Pepiot , P. , and Pitsch , H. A Chemical Mechanism for Low to High Temperature Oxidation of N-Dodecane as a Component of Transportation Fuel Surrogates Combustion and Flame 161 4 2014 866 884
- Vié , A. , Franzelli , B. , Gao , Y. , Lu , T. et al. Analysis of Segregation and Bifurcation in Turbulent Spray Flames: A 3D Counterflow Configuration Proceedings of the Combustion Institute 35 2 2015 1675 1683
- Bikas , G. and Peters , N. Kinetic Modelling of N-Decane Combustion and Autoignition: Modeling Combustion of N-Decanem Combustion and Flame 126 1 2001 1456 1475
- Blanquart , G. , Pepiot-Desjardins , P. , and Pitsch , H. Chemical Mechanism for High Temperature Combustion of Engine Relevant Fuels with Emphasis on Soot Precursors Combustion and Flame 156 3 2009 588 607
- Cai , L. and Pitsch , H. Mechanism Optimization based on Reaction Rate Rules Combustion and Flame 161 2 2014 405 415
- Kogekar , G. , Karakaya , C. , Liskovich , G.J. , Oehlschlaeger , M.A. et al. Impact of Non-Ideal Behavior on Ignition Delay and Chemical Kinetics in High-Pressure Shock Tube Reactors Combustion and Flame 189 2018 1 11
- Desantes , J.M. , López , J.J. , García-Oliver , J.M. , and López-Pintor , D. Experimental Validation and Analysis of Seven Different Chemical Kinetic Mechanisms for N-Dodecane using a Rapid Compression-Expansion Machine Combustion and Flame 182 2017 76 89
- Idicheria , C.A. and Pickett , L.M. Quantitative Mixing Measurements in a Vaporizing Diesel Spray by Rayleigh Imaging SAE World Congress & Exhibition, SAE International Apr 2007
- Pickett , L.M. et al. Relationship between Diesel Fuel Spray Vapor Penetration/Dispersion and Local Fuel Mixture Fraction SAE International Journal of Engines 4 Apr 2011 764 799
- Meijer , M. , Malbec , L.M.C. , Bruneaux , G. , and Somers , L. Engine Combustion Network: “Spray A” Basic Measurements and Advanced Diagnostics International Conference on Liquid Atomization and Spray Systems (ICLASS) September 2012
- Pope , S.B. An Explanation of the Turbulent Round-Jet/Plane-Jet Anomaly AIAA Journal 16 3 1978 279 281
- Janicka , J. and Peters , N. Prediction of Turbulent Jet Diffusion Flame Lift-Off using a Pdf Transport Equation Symposium (International) on Combustion 19 1 367 374 1982
- https://ecn.sandia.gov/workshop/ECN2/Proceedings_Ignition_LiftOff.pdf
- Pei , Y. , Hawkes , E.R. , Kook , S. , Goldin , G.M. et al. Modelling N-Dodecane Spray and Combustion with the Transported Probability Density Function Method Combustion and Flame 162 5 2015 2006 2019
- Pei , Y. , Som , S. , Pomraning , E. , Senecal , P.K. et al. Large Eddy Simulation of a Reacting Spray Flame with Multiple Realizations under Compression Ignition Engine Conditions Combustion and Flame 162 12 2015 4442 4455
- Skeen , S.A. , Manin , J. , and Pickett , L.M. Simultaneous Formaldehyde Plif and High-Speed Schlieren Imaging for Ignition Visualization in High-Pressure Spray Flames Proceedings of the Combustion Institute 35 3 2015 3167 3174
- Meijer , M. , Somers , B. , Johnson , J. , Naber , J. et al. Engine Combustion Network (ECN): Characterization and Comparison of Boundary Conditions for Different Combustion Vessels Atomization and Sprays 22 9 2012 777 806