This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
High-Power Synchronous Rectification Drive Power System Based on PID Control
Technical Paper
2022-01-0720
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The driving power system can be combined with lasers, lights, etc., and applied to automobiles to achieve various functions. Under the general trend of the development of intelligent vehicles, people have higher and higher requirements for the accuracy and power of various equipment. However, as power increases, how to ensure the stability of factors such as current is a challenging problem. Therefore, it is extremely important to study and design a high-power drive system in this paper, so as to ensure a stable output of the current. The system is composed of power supply, load, secondary power supply and control chip. The choice of power supply and load is conventional model. The secondary power supply adopts step-down circuit, with synchronous rectifier chip, which can effectively reduce energy consumption, and with temperature protection device, which can ensure the safe and reliable operation of equipment. The control part adopts the algorithm of combination of incremental PID and integral separated PID, and the accurate output of current can be realized by adjusting duty cycle. The results show that the linearity is only 0.82%, the return error tends to zero, and the maximum accuracy error is 0.02A, which basically meets the requirements. Compared with other research achievements, the content in this paper has a certain integrity, and has high practicality in laser, lighting and other equipment.
Authors
Topic
Citation
Wang, H. and Ma, J., "High-Power Synchronous Rectification Drive Power System Based on PID Control," SAE Technical Paper 2022-01-0720, 2022, https://doi.org/10.4271/2022-01-0720.Also In
References
- Zheng , Z. Talking About the Current Situation and Future Development Trend of the Shared Car Industry [J] Shandong Industrial Technology 11 2019 199 200, 128
- Xiujuan , C. Welcome to the New Automobile Revolution [J] Automobile Observation 10 2018 82 83
- Yiyang , Y. Discussion on Sensor Fusion in Automatic Driving [J] Internal Combustion Engine and Accessories 22 2019 202 205
- Lijun , W. , Yongqiang , N. , Li , Q. et al. Research Progress of High-Power Semiconductor Lasers [J] Acta Luminescence 36 1 2015 1 19
- Kawahara , R. et al. The Development of a High Quality and a High Peak Power Pulsed Fiber Laser With a Flexible Tunability of the Pulse Width Furukawa Review 49 2018 43 48
- Erickson , C.J. et al. An Ultrahigh Stability, Low-Noise Laser Current Driver with Digital Control Review of Scientific Instruments 79 7 2008
- Xingzi , X. Analysis and Design of High-Power Semiconductor Laser Power Supply Unit [D] Hubei Huazhong University of Science and Technology 2019
- Zheliang , Z. Research on high-power semiconductor laser driving power supply [D] Hubei Huazhong University of Science and Technology 2018
- Tanping , L. Research on the Key Technology of High-Power Semiconductor Laser Drive Power Supply [D] Shanxi North University of China 2014
- Rong , Z. Research on High-Power Diode-Pumped Laser Power Supply [D] Changchun University of Science and Technology 2009
- Chen , Y. Research on High-Efficiency Excitation Source of High-Power Semiconductor Lasers [D] Jilin Changchun University of Science and Technology 2011
- Hua , C. , Bin , S. , Wei , L. et al. Energy Management Strategy of High-Power LD Pump Laser Drive Power Supply [J] Laser and Infrared 45 4 2015 383 388
- Jinglu , C. et al. Design of Synchronous Rectification DC-DC Converter Chongqing, China Institute of Electrical and Electronics Engineers Inc 2021
- Moon , S. , Chen , C. , and Wang , R. 2021
- Pehrman , D. et al. Loss Reduction by Synchronous Rectification in a 50 kW SiC-based Inductive Power Transfer S ystem Virtual, Singapore, Singapore IEEE Computer Society 2020
- Tiewu , X. Car Communication Network Design Based on CAN/LIN bus [J] Internal combustion engine and accessories 6 2020 213 214
- Xuefeng , L. Design of STM32 Smart Car Robot Based on PID [J] Automation Technology and Application 35 11 2016 122 127
- Feng , Z. , Mingchao , S. , Yanping , W. et al. Design of Intelligent Water Temperature Monitoring System Based on STM32 and PID-PWM [J] Journal of Chengdu University of Technology 22 2 2019 24 28
- Yijun , G. , Haijun , L. , and Xinglin , D. Design of Incremental Integral Separation PID Controller Based on S7-200 [J] Industrial Instrumentation and Automation 6 2007 61 63