This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
On Predictive Nozzle Simulations with Advanced Equations of State and Pressure Boundary Conditions
Technical Paper
2022-01-0504
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The reduction of harmful emissions is a key challenge in fighting climate change and global warming. Besides battery electric vehicles (BEVs), improved engine efficiency and alternate fuels, such as e-fuels or biofuels, can improve the emission budget of the transportation sector. Pred ictive simulations can be utilized as these avoid relying on slow manufacturing processes and expensive experiments. As the properties of alternative fuels can change drastically compared to classical fuels, even engine parameters, such as the mass flow rate, need to be reevaluated and optimized. However, simulation frameworks often rely on mass flow rates as input quantity, and hence, a prediction is impossible. This paper gives accurate pressure-based boundary conditions for multiphase systems and focuses on equations of state (EOS) employed in homogeneous equilibrium models (HEMs). Additionally, a dual-density approach is introduced to correct modeling errors that are intrinsic to a particular EOS. The methods were implemented in the simulation code CIAO and applied to two different gasoline direct injection setups, as well as two nozzles of the Engine Combustion Network (ECN) for validation. The results are discussed and analyzed, especially with respect to cavitation and hydraulic flip.
Topic
Citation
Bode, M. and Schwarz, P., "On Predictive Nozzle Simulations with Advanced Equations of State and Pressure Boundary Conditions," SAE Technical Paper 2022-01-0504, 2022, https://doi.org/10.4271/2022-01-0504.Also In
References
- Li , T. , Moon , S. , Sato , K. , and Yokohata , H. A Comprehensive Study on the Factors Affecting Near-Nozzle Spray Dynamics of Multi-Hole GDI Injectors Fuel 190 2017 292 302
- Payri , R. , Gimeno , J. , Cuisano , J. , and Arco , J. Hydraulic Characterization of Diesel Engine Single-Hole Injectors Fuel 180 2016 357 366
- Payri , R. , Viera , J.P. , Gopalakrishnan , V. , and Szymkowicz , P.G. The Effect of Nozzle Geometry Over the Evaporative Spray Formation for Three Different Fuels Fuel 188 2017 645 660
- Payri , R. , Viera , J.P. , Gopalakrishnan , V. , and Szymkowicz , P.G. The Effect of Nozzle Geometry Over Ignition Delay and Flame Lift-Off of Reacting Direct-Injection Sprays for Three Different Fuels Fuel 199 2017 76 90
- Payri , R. , Salvador , F. , la Morena , J.D. , and Pagano , V. Experimental Investigation of the Effect of Orifices Inclination Angle in Multihole Diesel Injector Nozzles. Part 2 - Spray Characteristics Fuel 213 215 221 2018
- Salvador , F. , Lopez , J. , la Morena , J.D. , and Crialesi-Esposito , M. Experimental Investigation of the Effect of Orifices Inclination Angle in Multihole Diesel Injector Nozzles. Part 1 - Hydraulic Performance Fuel 213 207 214 2018
- National Technology and Engineering Solutions of Sandia, LLC (NTESS) https://ecn.sandia.gov/diesel-spray-combustion/target-condition/spray-ab/
- Örley , F. , Trummler , T. , Hickel , S. , Mihatsch , M.S. et al. Large-Eddy Simulation of Cavitating Nozzle Flow and Primary Jet Break-Up Physics of Fluids 27 8 2015 086101
- Knudsen , E. , Doran , E.M. , Mittal , V. , Meng , J. et al. Compressible Eulerian Needle-to-Target Large Eddy Simulations of a Diesel Fuel Injector Proceedings of the Combustion Institute 36 2 2017 2459 2466
- Matheis , J. and Hickel , S. Multi-Component Vapor-Liquid Equilibrium Model for Les of High-Pressure Fuel Injection and Application to ECN Spray a International Journal of Multiphase Flow 99 2018 294 311
- Rodriguez , C. , Rokni , H.B. , Koukouvinis , P. , Gupta , A. et al. Complex Multicomponent Real-Fluid Thermodynamic Model for High-Pressure Diesel Fuel Injection Fuel 257 2019 115888
- Blume , M. , Schwarz , P. , Rusche , H. , Weiß , L. et al. 3d Simulation of Turbulent and Cavitating Flow for the Analysis of Primary Breakup Mechanisms in Realistic Diesel Injection Processes Atomization and Sprays 29 10 2019 861 893
- Žilic , A. , Pachler , K. , and Cristofaro , M. Influence of Inflow Boundary Conditions on High-Pressure Fuel Injection: Assessment Based on Les Approach SAE International Journal of Engines 13 2019 11
- Cristofaro , M. , Edelbauer , W. , Koukouvinis , P. , and Gavaises , M. A Numerical Study on the Effect of Cavitation Erosion in a Diesel Injector Applied Mathematical Modelling 78 2020 200 216
- Schwarz , P. , Blume , M. , Weiß , L. , Wensing , M. et al. 3d Simulation of a Ballistic Direct Injection Cycle for the Assessment of Fuel Property Effects on Cavitating Injector Internal Flow Dynamics and Primary Breakup Fuel 308 2022 121775
- Falkenstein , T. , Bode , M. , Kang , S. , Pitsch , H. , et al. Large-Eddy Simulation Study on Unsteady Effects in a Statistically Stationary SI Engine Port Flow SAE 2015 World Congress & Exhibition SAE International 2015
- Falkenstein , T. , Davidovic , M. , Chu , H. , Bode , M. et al. Experiments and Large-Eddy Simulation for a Flowbench Configuration of the Darmstadt Optical Engine Geometry SAE Int. J. Engines 13 4 2020 704 502
- Bode , M. , Diewald , F. , Broll , D. , Heyse , J. et al. Influence of the Injector Geometry on Primary Breakup in Diesel Injector Systems SAE Technical Paper 2014-01-1427 2014 https://doi.org/10.4271/2014-01-1427
- Bode , M. , Falkenstein , T. , Le Chenadec , V. , Kang , S. et al. A New Euler/Lagrange Approach for Multiphase Simulations of a Multi-Hole GDI Injector SAE Technical Paper 2015-01-0949 2015 https://doi.org/10.4271/2015-01-0949
- Bode , M. , Davidovic , M. , and Pitsch , H. Multi-Scale Coupling for Predictive Injector Simulations High-Performance Scientific Computing: First JARA-HPC Symposium, JHPCS 2016, Aachen, Germany, October 4-5, 2016, Revised Selected Papers Di Napoli , E. , Hermanns , M.-A. , Iliev , H. , Lintermann , A. , and Peyser , A. Cham Springer International Publishing 2017 96 108
- Bode , M. , Collier , N. , Bisetti , F. , and Pitsch , H. Adaptive Chemistry Lookup Tables for Combustion Simulations Using Optimal b-Spline Interpolants Combust. Theor. Model. 23 4 2019 674 699
- Bode , M. , Satcunanathan , S. , Maeda , K. , Colonius , T. , and Pitsch , H. An Equation-of-State Tabulation Approach for Injectors with Non-Condensable Gases: Development and Analysis 10th International Cavitation Symposium Baltimore USA 2018
- Métayer , O.L. , Massoni , J. , and Saurel , R. Elaborating Equations of State of a Liquid and Its Vapor for Two-Phase Flow Models International Journal of Thermal Sciences 43 2004 265 276
- Métayer , O.L. and Saurel , R. The Noble-Abel Stiffened-Gas Equation of State Physics of Fluids 28 2016 046 102
- Daubert , T.E. , Oscarson , J.L. , Danner , R.P. , Sibul , H.M. , and Stebbins , C.C. Physical and Thermodynamic Properties of Pure Chemicals: DIPPR - Data Compilation: Supplement 10 Justus-Liebig-Universität Gießen Taylor & Francis 2000
- 2018 https://www.nist.gov
- Caudwell , D. , Trusler , J. , Vesovic , V. , and Wakeham , W. The Viscosity and Density of n-Dodecane and n-Octadecane at Pressures Up to 200 MPa and Temperatures up to 473 K International Journal of Thermophysics. Proceedings of the Fifteenth Symposium on Thermophysical Properties, Part II 25 5 2004 1339 1352
- Mohapatra , C. , Schmidt , D. , Sforozo , B. , Matusik , K. et al. Collaborative Investigation of the Internal Flow and Near-Nozzle Flow of an Eight-Hole Gasoline Injector (Engine Combustion Network Spray G) International Journal of Engine Research 06 2020
- Coussement , A. , Gicquel , O. , Caudal , J. , Fiorina , B. et al. Three-Dimensional Boundary Conditions for Numerical Simulations of Reactive Compressible Flows with Complex Thermochemistry Journal of Computational Physics 231 17 2012 5571 5611
- Thompson , K.W. Time Dependent Boundary Conditions for Hyperbolic Systems Journal of Computational Physics 68 1 1987 1 24
- Poinsot , T.J. and Lele , S.K. Boundary Conditions for Direct Simulations of Compressible Viscous Flows Journal of computational physics 101 1 1992 104 129
- Yoo , C.S. , Wang , Y. , Trouvé , A. , and Im , H.G. Characteristic Boundary Conditions for Direct Simulations of Turbulent Counterflow Flames Combustion Theory and Modelling 9 4 2005 617 646
- Rudy , D.H. and Strikwerda , J.C. A Nonreflecting Outflow Boundary Condition for Subsonic Navier-Stokes Calculations Journal of Computational Physics 36 1 1980 55 70
- Sutherland , J.C. and Kennedy , C.A. Improved Boundary Conditions for Viscous, Reacting, Compressible Flows Journal of Computational Physics 191 2 2003 502 524
- Bode , M. , Falkenstein , T. , Davidovic , M. , Pitsch , H. et al. Effects of Cavitation and Hydraulic Flip in 3-Hole GDI Injectors SAE International Journal of Fuels and Lubricants 10 2 2017 1 14
- Battistoni , M. , Duke , D. , Swantek , A.B. , Tilocco , F.Z. et al. Effects of Noncondensable Gas on Cavitating Nozzles Atomization and Sprays 25 6 2015 453 483
- Bode , M. , vom Lehn , F. , and Pitsch , H. Numerical Investigation of the Effect of Dissolved Non-Condensable Gases on Hydraulic Flip in Cavitating Nozzles 10th International Cavitation Symposium Baltimore, USA 2018
- Wang , B. , Jiang , Y. , Hutchins , P. , Badawy , T. et al. Numerical Analysis of Deposit Effect on Nozzle Flow and Spray Characteristics of GDI Injectors Applied Energy 204 2017 1215 1224