Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

High-Speed Thermographic Analysis of Diesel Injector Nozzle Tip Temperature

Journal Article
2022-01-0495
ISSN: 2641-9645, e-ISSN: 2641-9645
DOI: https://doi.org/10.4271/2022-01-0495
Published March 29, 2022 by SAE International in United States
High-Speed Thermographic Analysis of Diesel Injector Nozzle Tip Temperature
Sector:
Citation: Gander, A., Crua, C., Sykes, D., Spragg, R. et al., "High-Speed Thermographic Analysis of Diesel Injector Nozzle Tip Temperature," SAE Int. J. Adv. & Curr. Prac. in Mobility 4(5):1734-1741, 2022, https://doi.org/10.4271/2022-01-0495.
Language: English

References

  1. Zhu , J. , Kuti , O.A. , and Nishida , K. Effects of Injection Pressure and Ambient Gas Density on Fuel - Ambient Gas Mixing and Combustion Characteristics of di Diesel Spray SAE Technical Paper 2011-01-1819 2011 https://doi.org/10.4271/2011-01-1819
  2. Payri , R. , García-Oliver , J.M. , Bardi , M. , and Manin , J. Fuel Temperature Influence on Diesel Sprays in Inert and Reacting Conditions Applied Thermal Engineering 35 2012 185 195
  3. Hsueh , M.-H. and Lin , D.-F. The Performance Analysis and Design Optimization of Fuel Temperature Control for the Injection Combustion Engine Journal of the Chinese Institute of Engineers 39 7 2016 777 784
  4. Chen , G. Study of Fuel Temperature Effects on Fuel Injection, Combustion, and Emissions of Direct-Injection Diesel Engines Journal of Engineering for Gas Turbines and Power 131 2 2008
  5. Rahim , R. , Mamat , R. , Taib , M.Y. , and Abdullah , A.A. Influence of Fuel Temperature on a Diesel Engine Performance Operating with Biodiesel Blended Journal of Mechanical Engineering and Sciences 2 2012 226 236
  6. Payri , R. , Salvador , F.J. , Carreres , M. , and Morena , J.D.L. Fuel Temperature Influence on the Performance of a Last Generation Common-Rail Diesel Ballistic Injector. Part II: 1d Model Development, Validation and Analysis Energy Conversion and Management 114 2016
  7. Papadopoulos , N. and Aleiferis , P. Numerical Modelling of the in-Nozzle Flow of a Diesel Injector with Moving Needle During and After the End of a Full Injection Event SAE Technical Paper 2015-24-2472 2015 https://doi.org/10.4271/2015-024-2472
  8. Sykes , D. , Turner , J. , Stetsyuk , V. , de Sercey , G. et al. Quantitative Characterisations of Spray Deposited Liquid Films and Post-Injection Discharge on Diesel Injectors Fuel 289 2021 119833
  9. Sykes , D. , Stetsyuk , V. , Turner , J. , de Sercey , G. et al. A Phenomenological Model for Near-Nozzle Fluid Processes: Identification and Qualitative Characterisations Fuel 310PA 2022 122208
  10. Jahangirian , S. , Egelja , A. , and Li , H. A Detailed Computational Analysis of Cavitating and Non-Cavitating High Pressure Diesel Injectors SAE Technical Paper 2016-01-0873 2016 https://doiorg/10.4271/2016-01-0873
  11. Sykes , D. , Sercey , G.D. , Gold , M. , Pearson , R. et al. Visual Analyses of End of Injection Liquid Structures and the Behaviour of Nozzle Surface-Bound Fuel in a Direct Injection Diesel Engine SAE Technical Paper 2019-01-0059 2019 https://doi.org/10.4271/2019-01-0059
  12. Risberg , P.A. , Adlercreutz , L. , Aguilera , M.G. , Johansson , T. et al. Development of a Heavy Duty Nozzle Coking Test SAE Technical Paper 2013-01-2674 2013 https://doi.org/10.4271/2013-01-2674
  13. Malbec , L.M. , Pickett , L.M. , Payri , R. , Bazyn , T. , et al. Spray A Nozzle Tip Temperature Measurements ECN Workshop 2011
  14. Gimeno , J. , Martí-Aldaraví , P. , Carreres , M. , and Peraza , J.E. Effect of the Nozzle Holder on Injected Fuel Temperature for Experimental Test Rigs and Its Influence on Diesel Sprays International Journal of Engine Research 19 3 2018 374 389
  15. Kashdan , J. and Bruneaux , G. Laser-Induced Phosphorescence Measurements of Combustion Chamber Surface Temperature on a Single-Cylinder Diesel Engine SAE Technical Paper 2011-01-2049 2011 https://doi.org/10.4271/2011-01-2049
  16. Stone , C.R. and Ladommatos , N. The Measurement and Analysis of Swirl in Steady Flow SAE Technical Paper 921642 1992 https://doi.org/10.4271/921642
  17. Forte , C. , Catellani , C. , Cazzoli , G. , Bianchi , G.M. et al. Numerical Evaluation of the Applicability of Steady Test Bench Swirl Ratios to Diesel Engine Dynamic Conditions Energy Procedia 81 2015 732 741
  18. Lagueux , P. , Tremblay , P. , Savary , S. , Farley , V. et al. High-Speed Infrared Imaging for Analysis of a Diesel Engine Supplied with a Premixed Methane-Air Charge Measurement Automation Monitoring 63 2017
  19. NIST WebBook https://webbook.nist.gov/cgi/cbook.cgi?ID=C630080Type=IRSPECIndex=1IR-SPEC
  20. De Falco , G. , Moggia , G. , Sirignano , M. , Commodo , M. et al. Exploring Soot Particle Concentration and Emissivity by Transient Thermocouples Measurements in Laminar Partially Premixed Coflow Flames Energies 10 2 2017 232
  21. Gubareff , G.G. Thermal Radiation Properties Survey: A Review of the Literature Honeywell Research Center 1960

Cited By

Recommended Content

Technical Paper Assessment of a Detailed Kinetic Diesel Combustion Model by In-Cylinder Optical Measurements
Technical Paper A Novel Transient Drop Sizing Technique for Investigating the Role of Gasoline Injector Sprays in Fuel Mixture Preparation
Technical Paper Insight on Early Spray Formation Process of a High-Pressure Swirl Injector for DISI Engines