Try Mobilus Beta
Search tips
Open Access

Influences of Martensite Morphology and Precipitation on Bendability in Press-Hardened Steels

Journal Article
2022-01-0238
ISSN: 2641-9645, e-ISSN: 2641-9645
DOI: https://doi.org/10.4271/2022-01-0238
Published March 29, 2022 by SAE International in United States
Influences of Martensite Morphology and Precipitation on Bendability in Press-Hardened Steels
Sector:
Citation: Enloe, C. and Mohrbacher, H., "Influences of Martensite Morphology and Precipitation on Bendability in Press-Hardened Steels," SAE Int. J. Adv. & Curr. Prac. in Mobility 4(4):1181-1188, 2022, https://doi.org/10.4271/2022-01-0238.
Language: English

References

  1. Horvath , C. , Enloe , C.M. , Singh , J.P. , and Coryell , J. Persistent Challenges to Advanced High-Strength Steel Implementation Proceedings of the 3rd International Symposium on New Developments in Advanced High-Strength Sheet Steels 2017 1 10
  2. Karbasian , H. and Tekkaya , A.E. A Review on Hot Stamping J. Mater. Proc. Tech 210 2012 2103 2118
  3. Wang , Z. , Cao , Z.H. , Wang , J.F. , and Huang , M.X. Improving the Bending Toughness of Al-Si Coated Press-Hardened Steel by Tailoring Coating Thickness Scripta Mater. 192 2021 19 25
  4. Ramisetti , N. , Wang , J. , Enloe , C.M. , Lu , Q. et al. Loading Rate Effects on Apparent Bendability of 1.8 GPa PHS Proceedings of the 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel Lulea, Sweden June 2-5 2019
  5. Larour , P. , Naito , J. , Pichler , A. , Kurz , T. , et al. Side Impact Crash Behavior of Press-Hardened Steels - Correlation with Mechanical Properties Proceedings of the 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel Toronto, Canada May 31-June 3 2015 85 92
  6. Frómeta , D. , Lara , A. , Molas , S. , Casellas , D. et al. On the Correlation between Fracture Toughness and Crash Resistance of Advanced High Strength Steels Eng. Fract. Mech. 205 2019 319 332
  7. Suppan , C. , Hebesberger , T. , Pichler , A. , Rehrl , J. et al. On the Microstructure Control of the Bendability of Advanced High Strength Steels Mater. Sci. Eng. A 735 2018 89 98
  8. VDA 238-100
  9. Golem , L. , Cho , L. , Speer , J.G. , and Findley , K.O. Influence of Austenitizing Parameters on Microstructure and Mechanical Properties of Al-Si Coated Press Hardened Steel Mater. & Des. 172 2019 doi.org/10.1016/j.matdes.2019.107707
  10. GMW14400 June 2019
  11. Arola , A.M. , Kaijalainen , A. , Kesti , V. , Troive , L. et al. The Effect of Mechanical Behavior on Bendability of Ultrahigh-Strength Steel Mater. Today Comm. 26 2021 101943 doi.org/10.1016/j.mtcomm.2020.101943
  12. Soyarslan , C. , Malekipour Gharbi , M. , and Tekkaya , A.E. A Combined Experimental-Numerical Investigation of Ductile Fracture in Bending of a Class of Ferritic-Martensitic Steel Int. J. Sol. Struct. 49 13 2012 1608 1626 doi.org/10.1016/j.ijsolstr.2012.03.009
  13. Yamazaki , K. , Oka , M. , Yasuda , H. , Mizuyama , Y. et al. Recent Advances in Ultrahigh-Strength Sheet Steels for Automotive Structural Use Nippon Steel Tech. Rep. 1995 37 44
  14. Reche , D. , Sturel , T. , Bouaziz , O. , Col , A. et al. Damage Development in Low Alloy TRIP-Aided Steels during Air-Bending Mater. Sci. Eng. A 528 2011 5241 5250
  15. Pathak , N. , Butcher , C. , Worswick , M.J. , Bellhouse , E. et al. Damage Evolution in Complex-Phase and Dual-Phase Steels during Edge Stretching Materials 10 4 2017 346
  16. Pang , J.C. , Yi , H.L. , Lu , Q. , Enloe , C.M. et al. Effect of TiN-Particles on Fracture of Press-Hardened Steel Sheets and Components JOM 71 2019 1329 1337 doi.org/10.1007/s11837-018-3308-z
  17. Shen , Y. and Hansen , S. Effect of the Ti/N Ratio on the Hardenability and Mechanical Properties of a Quenched-and-Tempered C-Mn-B Steel Met. Mat. Trans. A 28A 1997 2027
  18. Stock , J. , Enloe , C.M. , O’Malley , R.J. , Findley , K.O. et al. Cooling Rate Effects on the As-Cast Titanium Nitride Precipitation Size Distribution in a Low-Carbon Steel AIST Trans. 11 4 2014 180
  19. Kaijalainen , A.J. , Suikkanen , P.P. , Karjalainen , L.P. et al. Influence of Subsurface Microstructure on the Bendability of Ultrahigh-Strength Strip Steel Mater. Sci. Eng. A 654 2016 151 160
  20. Enloe , C.M. , Wang , J. , Singh , J.P. , Horvath , C. et al. Process Influences on Press-Hardened Steel Microstructure and Impact Performance Iron Steel Tech. October 2016 124 132
  21. Wang , J. , Enloe , C. , Singh , J. , and Horvath , C. Effect of Prior Austenite Grain Size on Impact Toughness of Press Hardened Steel SAE Int. J. Mater. Manuf. 9 2 2016 488 493
  22. Kawata , H. , Honda , Y. , and Takeda , K. Effect of Carbon Content on Strengthening Behavior with Grain Refinement on Lath Martensite Structure TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings doi.org/10.1007/978-3-030-05861-6_50
  23. Krauss , G. and Marder , A.R. The Morphology of Martensite in Iron Alloys Metall. Mater. Trans. B 2 1971 2343 doi.org/10.1007/BF02814873
  24. Morito Saito , S.H. , Ogawa , T. , Furuhara , T. , and Maki , T. Effect of Austenite Grain Size on the Morphology and Crystallography of Lath Martensite in Low Carbon Steels ISIJ Int. 45 1 2005 91
  25. Ritchie , R.O. , Francis , B. , and Server , W.L. Evaluation of Toughness in AISI 4340 Alloy Steel Austenitized at Low and High Temperatures Met. Trans. A 7A 1976 831
  26. Speich , G.R. Tempering of Low Carbon Martensite Trans. TMS-AIME 245 1969 2553 2564
  27. Speich , G.R. and Leslie , W.C. Tempering of Steel Metall. Mater. Trans. B 3 1972 1043 1054 https://doi.org/10.1007/BF02642436
  28. Nagataki , Y. , Tsuyama , S. , Hosoya , Y. , and Okita , T. Effect of Microstructure on Bendability of Ultra-High-Strength Steel Sheet 1994 High-Strength Steels for Automotive Symposium Proceedings Warrendale, PA 1994 239 244
  29. Choi , W.S. , Lee , J. , and De Cooman , B.C. Internal-Friction Analysis of Dislocation-Interstitial Carbon Interactions in Press-Hardened 22MnB5 Steel Mater. Sci. Eng. A 639 2015 439 447 doi.org/10.1016/j.msea.2015.05.055
  30. Lin , L. , Li , B. , Zhu , G. , Kang , Y. et al. Effect of Niobium Precipitation Behavior on Microstructure and Hydrogen Induced Cracking of Press Hardening Steel 22MnB5 Mater. Sci. Eng. A 721 2018 38 46 doi.org/10.1016/j.msea.2018.02.021
  31. Cho , L. , Sulistiyo , D.H. , Seo , E.J. , Jo , K.R. et al. Hydrogen Absorption and Embrittlement of Ultra-High Strength Aluminized Press Hardening Steel Mater. Sci. Eng. A 734 2018 416 426 doi.org/10.1016/j.msea.2018.08.003
  32. Fan , D.W. and De Cooman , B.C. State-of-the-Knowledge on Coating Systems for Hot Stamped Parts Steel. Res. Int. 83 5 2012 412 433 doi.org/10.1002/srin.201100292
  33. Windmann , M. , Röttger , A. , and Theisen , W. Formation of Intermetallic Phases in Al-Coated Hot-Stamped 22MnB5 Sheets in Terms of Coating Thickness and Si Content Surf. Coat. Tech. 246 2014 17 25 doi.org/10.1016/j.surfcoat.2014.02.056
  34. Choi , W.S. and De Cooman , B.C. Characterization of the Bendability of Press-Hardened 22MnB5 Steel Steel Res. Int. 85 5 2013 824 835
  35. Georges , C. , Sturel , T. , Drillet , P. , and Mataigne , J.-M. Absorption/Desorption of Diffusible Hydrogen in Aluminized Boron Steel ISIJ Int. 53 8 2013 1295 1304
  36. Zhang , S. , Huang , Y. , Sun , B. , Liao , Q. et al. Effect of Nb on Hydrogen-Induced Delayed Fracture in High Strength Hot Stamping Steels Mater. Sci. Eng. A 626 2015 136 143
  37. Ashby , M.F. Ansell , G.S. , Cooper , T.D. and Lenel , F.V. Oxide Dispersion Strengthening New York, N.Y., USA Gordon and Breach 1958 143
  38. Krauss , G. Martensite in Steel: Strength and Structure Mater. Sci. Eng. A 273-275 1999 40 57
  39. Kennett , S.C. , Krauss , G. , and Findley , K.O. Prior Austenite Grain Size and Tempering Effects on the Dislocation Density of Low-C Nb-Ti Microalloyed Lath Martensite Scripta Mater. 107 2015 123 126

Cited By

Recommended Content

Aerospace Material Specification Tungsten Sheet, Strip, Plate, and Foil, Pressed, Sintered, and Wrought
Aerospace Material Specification Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 08Si Solution and Precipitation Heat Treated
Aerospace Material Specification Titanium Alloy, Hydraulic, Seamless Tubing 3.0Al - 2.5V Annealed