This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Validation of 0D Knock Models through Different Knock Detection Methods
Technical Paper
2021-36-0028
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE BRASIL 2021 Web Forum
Language:
English
Abstract
This paper applies numerical models to simulate the Onset of Knock (OK) in a commercial automotive spark ignition engine. Results from different models were compared with different knock detection methods to verify the best agreement. Despite being widely studied and reported in the literature, avoiding knock still poses a challenge to engine efficiency improvement and it is the focus of many new technologies. Knock detection methods rely on measurements of incylinder pressure or engine vibrations to determine the onset of knock, while some 0D predictive models are deduced from experimental data and correlations involving the critical parameters related to the knock phenomenon. Although 0D predictive models are easy to apply and calculate, the initial formulation and the different experimental conditions used to create each model often result in different numerical formulations. In the present work, different operational conditions of a spark ignition (SI) engine were used to determine the OK using knock detection methods and numerical simulation models. Knock detection was performed through Maximum Amplitude of Pressure Oscillations (MAPO), Integral of Modulus of Pressure Gradient (IMPG), Integral of Modulus of Pressure Oscillations (IMPO). The experimental data is used as input for knock prediction calculations through Arrhenius type correlations and knock detection results were used as a reference to evaluate knock simulations. Simplified 0D models are effective tools in engine analysis but their variety of results match differently while compared with different experimental methods of knock detection. The model of Douaud & Eyzat, widely used in engine simulations indicated knock in an instant close to the instant of maximum pressure oscillations, while other models indicated delayed knock or did not indicated knock at all, despite all knock detection indexes showing similar knock intensity for all studied cases. This work aims to provide a useful dataset to support future choices of knock models and detection methods for engine analysis.
Authors
- Paulo Ricardo Penha - Centro Federal de Educação Tecnológica de Minas Gerais (CEFE
- Thiago Augusto Araújo Moreira - Centro Federal de Educação Tecnológica de Minas Gerais (CEFE
- Fernando Antônio Rodrigues Filho - Centro Federal de Educação Tecnológica de Minas Gerais (CEFE
- Marcelo Suman Silva Assis - Centro Federal de Educação Tecnológica de Minas Gerais (CEFE
Citation
Penha, P., Moreira, T., Filho, F., and Assis, M., "Validation of 0D Knock Models through Different Knock Detection Methods," SAE Technical Paper 2021-36-0028, 2022, https://doi.org/10.4271/2021-36-0028.Also In
References
- Wang , Z. , Liu , H. , and Reitz , R.D. Knocking combustion in spark-ignition engines Prog. Energy Combust. Sci. 61 2017 78 112 10.1016/j.pecs.2017.03.004
- ACEA Vehicles in Use in Europe 2019 2019
- EPA The 2020 EPA Automotive Trends Report 2021
- ANFAVEA Brazilian Automotive Industry Yearbook São Paulo 2020
- Baêta , J.G.C. Metodologia experimental para a maximização do desempenho de um motor multicombustível turboalimentado sem prejuízo à eficiência energética global Belo Horizonte Tese (Doutorado em Engenharia Mecânica), Universidade Federal de Minas Gerais 2006
- Heywood , J.B. Internal Combustion Engines Fundamentals 2 McGraw-Hill Education 9781260116106 2018
- MOREIRA , T. Análise E Caracterização De Um Sistema De Ignição Por Lança Chamas Operando Com Carga Homogênea Belo Horizonte Tese (Doutorado em Engenharia Mecânica), Universidade Federal de Minas Gerais 2014
- Rodrigues Filho , F.A.R. PROJETO, CONSTRUÇÃO E CARACTERIZAÇÃO DO DESEMPENHO DE UM MOTOR DE COMBUSTÃO INTERNA PROVIDO DE UM SISTEMA DE IGNIÇÃO POR LANÇA CHAMAS DE CARGA ESTRATIFICADA Belo Horizonte Tese (Doutorado em Engenharia Mecânica), Universidade Federal de Minas Gerais 2014
- Li , T. , Yin , T. , and Wang , B. A phenomenological model of knock intensity in spark-ignition engines Energy Convers. Manag. 148 2017 1233 1247 10.1016/j.enconman.2017.06.078
- Zhuang , Y. , Qian , Y. , and Hong , G. The effect of ethanol direct injection on knock mitigation in a gasoline port injection engine Fuel 210 August 2017 187 197 10.1016/j.fuel.2017.08.060
- Panzani , G. , Pozzato , G. , Savaresi , S.M. , Rösgren , J. et al. Engine knock detection: an eigenpressure approach IFAC-PapersOnLine 52 5 2019 267 272 10.1016/j.ifacol.2019.09.043
- Moshrefi , A. and Shoaei , O. Improved Knock Detection Method Employing Wavelet and Adaptive Filter Based on Vibration Sensor Data July 2017 2018
- Ganesan , V. Internal Combustion Engines 2a Nova Delhi Tata Mcgraw-Hill Publishing Company Limited 2004 9780070494572
- Zhen , X. , Wang , Y. , Xu , S. , Zhu , Y. et al. The engine knock analysis - An overview Appl. Energy 92 2012 628 636 10.1016/j.apenergy.2011.11.079
- Galloni , E. Knock-limited spark angle setting by means of statistical or dynamic pressure based methods Energy Convers. Manag. 116 2016 11 17 10.1016/j.enconman.2016.02.070
- Saikaly , K. , Le Corre , O. , Rahmouni , C. , and Truffet , L. Preventive knock protection technique for stationary SI engines fuelled by natural gas ” Fuel Process. Technol. 91 6 641 652 2010 10.1016/j.fuproc.2010.01.011
- Konig , G. and Sheppard , C.G.W. End Gas Autoignition and Knock in a Spark Ignition Engine SAE Technical Paper , 1990 10.4271/902135
- Galloni , E. , Fontana , G. , and Staccone , S. Numerical and experimental characterization of knock occurrence in a turbo-charged spark-ignition engine Energy Convers. Manag. 85 2014 417 424 10.1016/j.enconman.2014.05.054
- Glassman , I. and Yetter , R.A. Combustion 4a Academic Press 2008 9780080568812
- Liberman , M.A. , Ivanov , M.F. , Peil , O.E. , Valiev , D.M. et al. Numerical modeling of the propagating flame and knock occurrence in spark-ignition engines Combust. Sci. Technol. 177 1 2005 151 182 10.1080/00102200590883813
- Xu , J. , Feng , Y. , Chang , S. , and Guo , T. Numerical and Experimental Study on Knock Sources in Spark Ignition Engine with Electromagnetic Valve Train Int. J. Automot. Technol. 21 6 2020 1369 1378 10.1007/s12239-020-0129-1
- Costa , M. , Sementa , P. , Sorge , U. , Catapano , F. , Marseglia , G. , and Vaglieco , B.M. Split Injection in a GDI Engine under Knock Conditions: An Experimental and Numerical Investigation SAE Tech. Pap. 2015 10.4271/2015-24-2432
- Zhuang , Y. and Guang , H. Effects of direct injection timing of ethanol fuel on engine knock and lean burn in a port injection gasoline engine Fuel 135 2014 27 37 10.1016/j.fuel.2014.06.028
- Li , A. , Zheng , Z. , and Peng , T. Effect of water injection on the knock, combustion, and emissions of a direct injection gasoline engine Fuel 268 February 2020 117376 10.1016/j.fuel.2020.117376
- Zhu , S. , Hu , B. , Akehurst , S. , Copeland , C. et al. A review of water injection applied on the internal combustion engine Energy Convers. Manag. 184 January 2019 139 158 10.1016/j.enconman.2019.01.042
- Bozza , F. , De Bellis , V. , and Teodosio , L. Potentials of cooled EGR and water injection for knock resistance and fuel consumption improvements of gasoline engines 2016 10.1016/j.apenergy.2016.01.129
- Brusca , S. , Galvagno , A. , Lanzafame , R. , Mauro , S. et al. Fuels with low octane number: water injection as knock control method Heliyon 5 2 2019 e01259 10.1016/j.heliyon.2019.e01259
- Chang , J. , Kim , M. , and Min , K. Detection of misfire and knock in spark ignition engines by wavelet transform of engine block vibration signals Meas. Sci. Technol. 13 7 2002 1108 1114 10.1088/0957-0233/13/7/319
- Shu , G. , Pan , J. , and Wei , H. Analysis of onset and severity of knock in SI engine based on in-cylinder pressure oscillations Appl. Therm. Eng. 51 1-2 2013 1297 1306 10.1016/j.applthermaleng.2012.11.039
- Brecq , G. and Le Corre , O. Modeling of in-cylinder pressure oscillations under knocking conditions: Introduction to pressure envelope curve SAE Tech. Pap. 2005 10.4271/2005-01-1126
- Bares , P. , Selmanaj , D. , Guardiola , C. , and Onder , C. A new knock event definition for knock detection and control optimization Appl. Therm. Eng. 131 2018 80 88 10.1016/j.applthermaleng.2017.11.138
- Livengood , J.C. and Wu , P.C. Correlation of autoignition phenomena in internal combustion engines and rapid compression machines Symp. Combust. 5 1 1955 347 355 10.1016/S0082-0784(55)80047-1
- KADOTA , T. , HIROYASU , H. , and OYA , H. Spontaneous Ignition Delay of a Fuel Droplet in High Pressure and High Temperature Gaseous Environments Bull. JSME 19 130 1976 437 445 10.1299/jsme1958.19.437
- Douaud , A.M. and Eyzat , P. Four-Octane-Number Method for Predicting the Anti-Knock Behavior of Fuels and Engines SAE Technical Paper , 1978 10.4271/780080
- da Penha , P.R. and Amorim , R.J. Comparison Between MCC and MZCM Combustion Models SAE Techinical Paper 2020 10.4271/2019-36-0133
- Wayne , W.S. , Clark , N.N. , and Atkinson , C.M. A Parametric Study of Knock Control Strategies for a Bi-Fuel Engine SAE Trans. 107 1998 1387 1398
- Hoepke , B. , Jannsen , S. , Kasseris , E. , and Cheng , W.K. EGR Effects on Boosted SI Engine Operation and Knock Integral Correlation SAE Int. J. Engines 5 2012 547 559 10.4271/2012-01-0707
- Chen , L. , Li , T. , Yin , T. , and Zheng , B. A predictive model for knock onset in spark-ignition engines with cooled EGR Energy Convers. Manag. 87 2014 946 955 10.1016/j.enconman.2014.08.002
- Teixeira , A.F. , Rodrigues Filho , F.A. , Moreira , T.A.A. , Barros , J.E.M. , and Baeta , J.G.C. Hybrid Combustion Model for Engine Analysis in Real Time SAE Tech. Pap. 1 14 2015 10.4271/2015-36-0213