This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Investigation on Corrosion and Wear Behavior of Automotive Materials
Technical Paper
2021-28-0238
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The energy demand of the world is keep increasing, major share of the demand is compensated by non-renewable fossil fuels. Automotive sector consumes a huge amount of fossil fuels, as majority of the segment use internal combustion as a prime mover. In the present era researches are carried to figure out the suitable replacements for fossil fuels to attain sustainable environment. One of the major challenge and keen interest of everyone is on waste management, several researches are aimed to bridge the gap between energy demand and waste management. In such way biofuels came into limelight a decade ago, still numerous works are carried in the area for creating socio economic friendly environment. Enormous studies have been carried out to assess their performance in the internal combustion engines, here in the present study performance of the working material against the biodiesel is studied. In order to optimize the material and its composition, there is need for characterization against the susceptible factors such as corrosion and wear if bio fuels are employed as working fluid. In internal combustion engines the materials used in piston and its associated components have to encounter the working fluid; their endurance should be ensured before their service. The present work covers the characterization of cast iron and aluminum alloy used in piston against biofuel for corrosion and wear resistance. Test specimens are prepared as per the standards; biodiesel is prepared from waste cooking oil by transesterification process for carrying out the experiment. Corrosion rate analysis is carried out as per the standards using constant electric water temperature bath for 1300 hours and surface morphology of test specimens is studied with help of scanning electron microscope and energy dispersive spectroscopy. Aluminum alloy test specimens were prepared and wear rate analysis is done using pin on disc machine. The corrosion rate of cast iron is more compared to aluminum alloy by 40 % when the working fluid is neat diesel and the rate increases to 55 % if biodiesel is used as working fluid. The wear rate of aluminum alloy increases rapidly when the lubrication oil contamination increases.
Recommended Content
Authors
- Sadhasivam Deepan Kumar - Bannari Amman Institute of Technology
- Boopalan N - Kongu Engineering College
- Nagarajan Praveenkumar - Dr.Mahalingam College of Engg and Tech.
- R Manojkumar - Dr.Mahalingam College of Engg and Tech.
- G E KITHIYON JOSHVA - Bannari Amman Institute of Technology
- J SAHAYA JUFERT ROY - Bannari Amman Institute of Technology
Topic
Citation
Deepan Kumar, S., N, B., Praveenkumar, N., Manojkumar, R. et al., "An Investigation on Corrosion and Wear Behavior of Automotive Materials," SAE Technical Paper 2021-28-0238, 2021, https://doi.org/10.4271/2021-28-0238.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 |
Also In
References
- Senthur , N.S. , Ganesh , H.R. , and Arun , K. Analysis of Hybrid Green Fuel Blended with Diesel as Fuel for Conventional Engine Recent Trends in Mechanical Engineering Singapore Springer 2021 1 12
- Gyamfi , B.A. , Adedoyin , F.F. , Bein , M.A. , Bekun , F.V. et al. The Anthropogenic Consequences of Energy Consumption in E7 Economies: Juxtaposing Roles of Renewable, Coal, Nuclear, Oil and Gas Energy: Evidence from Panel Quantile Method Journal of Cleaner Production 295 2021 126373
- Vohra , K. , Vodonos , A. , Schwartz , J. , Marais , E.A. et al. Global Mortality from Outdoor Fine Particle Pollution Generated by Fossil Fuel Combustion: Results from GEOS-Chem Environmental Research 195 2021 110754
- Jaichandar , S. and Annamalai , K. The Status of Biodiesel as an Alternative Fuel for Diesel Engine-An Overview Journal of Sustainable Energy & Environment 2 2 2011 71 75
- Mishra , V.K. and Goswami , R. A Review of Production, Properties and Advantages of Biodiesel Biofuels 9 2 2018 273 289
- Ma , Q. , Zhang , Q. , Liang , J. , and Yang , C. The Performance and Emissions Characteristics of Diesel/Biodiesel/Alcohol Blends in a Diesel Engine Energy Reports 7 2021 1016 1024
- Ripa , M. , Cadillo-Benalcazar , J.J. , and Giampietro , M. Cutting Through the Biofuel Confusion: A Conceptual Framework to Check the Feasibility, Viability and Desirability of Biofuels Energy Strategy Reviews 35 2021 100642
- Scown , C.D. , Baral , N.R. , Yang , M. , Vora , N. et al. Technoeconomic Analysis for Biofuels and Bioproducts Current Opinion in Biotechnology 67 2021 58 64
- Mendoza-Casseres , D. , Valencia-Ochoa , G. , and Duarte-Forero , J. Experimental Assessment of Combustion Performance in Low-Displacement Stationary Engines Operating with Biodiesel Blends and Hydroxy Thermal Science and Engineering Progress 23 2021 100883
- Dharmaprabhakaran , T. , Karthikeyan , S. , Periyasamy , M. , and Mahendran , G. Algal Biodiesel-Promising Source to Power CI Engines Materials Today: Proceedings 33 2020 2870 2873
- Hoang , A.T. , Tabatabaei , M. , and Aghbashlo , M. A Review of the Effect of Biodiesel on the Corrosion Behavior of Metals/Alloys in Diesel Engines Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 42 23 2020 2923 2943
- Simsek , S. Effects of Biodiesel Obtained from Canola, Sefflower Oils and Waste Oils on the Engine Performance and Exhaust Emissions Fuel 265 2020 117026
- Singh , D. , Sharma , D. , Soni , S.L. , Sharma , S. et al. A Review on Feedstocks, Production Processes, and Yield for Different Generations of Biodiesel Fuel 262 2020 116553
- Monyem , A. and Van Gerpen , J.H. The Effect of Biodiesel Oxidation on Engine Performance and Emissions Biomass and Bioenergy 20 4 2001 317 325
- Basha , S.A. , Gopal , K.R. , and Jebaraj , S. A Review on Biodiesel Production, Combustion, Emissions and Performance Renewable and Sustainable Energy Reviews 13 6-7 2009 1628 1634
- Atmanli , A. , Ileri , E. , and Yilmaz , N. Optimization of Diesel-Butanol-Vegetable Oil Blend Ratios Based on Engine Operating Parameters Energy 96 2016 569 580
- Atmanli , A. , Yüksel , B. , Ileri , E. , and Karaoglan , A.D. Response Surface Methodology Based Optimization of Diesel-N-Butanol-Cotton Oil Ternary Blend Ratios to Improve Engine Performance and Exhaust Emission Characteristics Energy Conversion and Management 90 2015 383 394
- Fayyazbakhsh , A. and Pirouzfar , V. Determining the Optimum Conditions for Modified Diesel Fuel Combustion Considering its Emission, Properties and Engine Performance Energy Conversion and Management 113 2016 209 219
- Vural , E. , Ozel , S. , and Ozer , S. Coating of Diesel Engine with New Generation Ceramic Material to Improve Combustion and Performance Thermal Science 25 2021 11 11
- Agarwal , A.K. and Agarwal , D. Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 3—Wear Assessment of Liner and Piston Rings, Engine Deposits, and Operational Issues Journal of Energy Resources Technology 143 4 2021
- Sentanuhady , J. , Saputro , W. , and Muflikhun , M.A. Metals and Chemical Compounds Contaminants in Diesel Engine Lubricant with B20 and B100 Biofuels for Long Term Operation Sustainable Energy Technologies and Assessments 45 2021 101161
- Yu , M. , Zhang , J. , Joedicke , A. , and Reddyhoff , T. Experimental Investigation into the Effects of Diesel Dilution on Engine Lubrication Tribology International 156 2021 106828
- Matbouei , M. , Weston , D.P. , Liang , X. , and Hainsworth , S.V. An Investigation of the Effect of Temperature on the Oxidation Processes of Metallic Diesel Engine Fuel System Materials and B100 Biodiesel from used Cooking Oil in Exposure Testing Fuel 285 2021 119063
- Cestari , A. , de Araújo , M. , and de Oliveira , D.C. 2021 Corrosion Behavior of Metallic Surfaces in Biodiesel Evaluated by Atomic Force Microscopy, Vickers Micro Hardness, and Copper Strip Test Engineering Failure Analysis 124 105329
- Kugelmeier , C.L. , Monteiro , M.R. , da Silva , R. , Kuri , S.E. et al. 2021 On the Corrosion Behavior of Carbon Steel, Stainless Steel, Aluminum and Copper Upon Exposure to Biodiesel Blended with Petrodiesel Energy 120344
- Serqueira , D.S. , Pereira , J.F. , Squissato , A.L. , Rodrigues , M.A. et al. Oxidative Stability and Corrosivity of Biodiesel Produced from Residual Cooking Oil Exposed to Copper and Carbon Steel Under Simulated Storage Conditions: Dual Effect of Antioxidants Renewable Energy 164 2021 1485 1495
- Deepankumar , S. Experimental Investigation of NOx Reduction using Selective Catalytic Reduction (SCR) with Diesel and Electronic Waste Pyrolysis Oil in VCR Engine Materials Science and Engineering 7 176 1 10
- Rajamurugan , G. , Deepankumar , S. , Ramakrishnan , A. , Krishnasamy , P. et al.
- Deepankumar , S. , Gobinath , R. , Balachandran , S. , and Boopathi , M. Experimental Investigation of Performance and Emission Characteristics of Diesel-Bio Diesel (CSOME) with Nano Additive Blends in CI Engine Adv Automob Eng 7 176 2008 2
- Deepankumar , S. , Gobinath , R. , and Balachandran , S. Experimental Investigation of Performance and Emission Characteristics Of Diesel-Bio Diesel (CSOME)-Ethanol-Diethyl Ether Blends In CI Engine In Journal of Thermal Energy Systems 2 3 2007 148 155
- Rajamurugan , G. , Deepankumar , S. , Ramakrishnan , A. , Krishnasamy , P. et al. Corrosion Characteristics on Friction Stir Welding of Dissimilar AA2014/AA6061 Alloy for Automobile Application SAE Technical Paper 2019-28-0063 2019 https://doi.org/10.4271/2019-28-0063
- Deepankumar , S. Design and Analysis with Optimization of Car Radiators Using Nanofluids Advanced Manufacturing Systems and Innovative Product Design Lecture Notes in Mechanical Engineering 2 33 46