This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Application of Combined Electric Arc Coatings for Parts and Units of Vehicles Recovery in Repair Technologies
Technical Paper
2021-01-5100
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
Automotive Technical Papers
Language:
English
Abstract
This paper is devoted to the methods of increasing wear resistance, corrosion resistance, and service life of parts and assemblies of vehicles during their strengthening and renovation by the use of combined electric arc spraying (EAS) coatings. High density, adhesion, and microhardness of EAS coatings are provided by activation of the spraying process and subsequent nitriding of the sprayed coatings. This study is about the influence of technological parameters of the spraying process—composition, diameter and feed rate of sprayed wires, arc power, spray gas flow rate, spraying distance, speed of spraying spot movement, dispersion of spraying, etc.—on the qualitative characteristics of EAS coatings. The possibility of using pulsed ion nitriding (PIN) to improve the operational characteristics of EAS coatings made of wire materials is considered. Also the control of the recovered surfaces in order to increase the service life of parts, assemblies, and assemblies of transport means is due to the choice of design parameters and characteristics of equipment for EAS. The work shows that the correct selection of equipment and its technological parameters will increase the speed and temperature of the jet of the transporting gas and particles, reduce the diameter of the droplets, increase the density, and reduce the oxidizability of the coatings.
Authors
- Maksim Ahieiev - Kherson State Maritime Academy
- Igor Gritsuk - Kherson State Maritime Academy
- Aleksandra Litikova - Kherson State Maritime Academy
- Ievhen Bilousov - Kherson State Maritime Academy
- Roman Vrublevskyi - Kherson State Maritime Academy
- Oleksandr Boboshko - Kharkiv National Automobile and Highway University
- Oleg Smyrnov - Kharkiv National Automobile and Highway University
- Iryna Saraieva - Kharkiv National Automobile and Highway University
- Igor Khudiakov - Kherson State Maritime Academy
- Dmytro Pohorletskyi - Kherson State Maritime Academy
Topic
Citation
Ahieiev, M., Gritsuk, I., Litikova, A., Bilousov, I. et al., "Application of Combined Electric Arc Coatings for Parts and Units of Vehicles Recovery in Repair Technologies," SAE Technical Paper 2021-01-5100, 2021, https://doi.org/10.4271/2021-01-5100.Also In
References
- Ageev , M.S. , Volkov , Y.V. , and Chigrai , S.L. Protective and Hardening Coatings in Ship Building and Repair Bulletin KhDMA - Kherson 2 13 2015 110 124
- Ageev , M.S. , Volkov , Y.V. , and Chigrai , S.L. Welding and Related Processes in Ship Building Water Transport - Kyiv 2 24 2015 15 26
- Kornev , A. 2006 23
- Belousov , E. , Marchenko , A. , Gritsuk , I. , Bulgakov , M. et al. Numerical Assessment of the Rates of Solid Fuel Combustion Reactions and Their Impact on the Working Process of a Solid-Fuel Piston Engine SAE Technical Paper 2021-01-5035 2021 https://doi.org/10.4271/2021-01-5035
- Belousov , E. , Marchenko , A. , Gritsuk , I.V. , Savchuk , V. et al. Research of the Gas Fuel Supply Process on the Compression Stroke in Ship’s Low-Speed Gas-Diesel Engines SAE Technical Paper 2020-01-2107 2020 https://doi.org/10.4271/2020-01-2107
- Iliuschenko , A.F. , Okovity , V.A. , Kundas , S.P. , and Formanek , B. Formation of Gas-Thermal Coatings: Theory and Practice Minsk: Bestprint 2002 480
- Gritsuk , I. , Pohorletskyi , D. , Mateichyk , V. , Symonenko , R. et al. Improving the Processes of Thermal Preparation of an Automobile Engine with Petrol and Gas Supply Systems (Vehicle Engine with Petrol and LPG Supplying Systems) SAE Technical Paper 2020-01-2031 2020 https://doi.org/10.4271/2020-01-2031
- Vitiaz , P.A. , Ivashko , V.S. , Manoilo , E.D. et al. Theory and Practice of Gas-Thermal Spraying Minsk Science and Technology 1993 295
- Baldaev , L.Kh. , Borisov , V.N. et al. Gas-Thermal Spraying L.Kh. Baldaev , Market DS 2007 344
- Mateichyk , M. , Saga , M. , Smieszek , M. , Tsiuman , N. et al. Information and Analytical System to Monitor Operating Processes and Environmental Performance of Vehicle Propulsion Systems IOP Conf. Series: Materials Science and Engineering 776 2020 012064 https://doi.org/10.1088/1757-899X/776/1/012064
- Kharlamov , Y.A. Thermal Spraying of Coatings and Ecological Compatibility of Production, Operation and Repair of Machines Heavy Engineering 2 2000 3 10
- Kondratiev , V.A. and Kondratiev , M.V. 2005 35 38
- Boronenkov , V.N. and Korobov , Yu.S. Fundamentals of Arc Metallization. Physicochemical Regularities Yekaterinburg Univ. Publ. House 2012 267
- Zagorsky , Ya.V. 2003 105
- Kuric , I. , Gorobchenko , O. , Litikova , O. , Gritsuk , I. et al. Research of Vehicle Control Informative Functioning Capacity IOP Conf. Series: Materials Science and Engineering 776 2020 012036 https://doi.org/10.1088/1757-899X/776/1/012036
- Gritsuk , V.M. , Ukrainskyi , I. , Shein , Y. , Stepanov , V. et al. А Development of the Analytical System for Vehicle Operating Conditions Management in the V2I Information Complex Using Simulation Modeling Eastern-European Journal of Enterprise Technologies 5 3 (107) 6 16 https://doi.org/10.15587/1729-4061.2020.215006
- Golovan , A. , Gritsuk , I. , Popeliuk , V. , Pohorletskyi , D. et al. Features of Mathematical Modeling in the Problems of Determining the Power of a Turbocharged Engine according to the Characteristics of the Turbocharger SAE Int. J. Engines 13 1 2020 1 12 https://doi.org/10.4271/03-13-01-0001
- Ageev , M.S. and Liashenko , B.A. Application of Hybrid Technologies for Renovation and Resource Increase of Ship Machinery and Mechanisms Bulletin of the Brest State Technical University, Scientific-theoretical journal Mechanical Engineering 4 94 2015 18 22
- Ageev , M.S. , Kozhevnikova , E.E. , and Lopata , V.N. Restoration of Ship Pump Shafts Using a Combined Method of Applying Protective Coatings Science Bulletin KhDMA - Kherson 2 13 2015 4 16
- Kozhevnikova , E.E. , Ageev , M.S. , and Chigray , S.L. Increasing the Life of Ship Pumps Based on Combined Restoration Technology Collection of Papers “Water Transport” Kyiv 2015 2 24 57 70
- Kuric , I. , Mateichyk , V. , Smieszek , M. , Tsiuman , M. et al. The Peculiarities of Monitoring Road Vehicle Performance and Environmental Impact MATEC Web of Conferences 244 2018 33rd Innovative Technologies in Engineering Production (ITEP 2018) Bojnice, Slovakia 2018 https://doi.org/10.1051/matecconf/201824403003
- Vilage , B. , Rupprecht , K. , and Pokhmurskaya , A. Features of Gas-Thermal Spraying with Flux-Cored Wires Automatic Welding 10 2011 26 30
- Pokhmursky , V.I. , Student , M.M. , and Pikh , V.S. Protective and Restorative Electric Metallization of Coatings from Cored Wires, New Processes and Equipment for Gas-Thermal and Vacuum Coating Collection of Papers “Electric Welding” Kyiv 1990 66 69
- Student , M.M. 1998 18
- Vitiaz , P.A. , Azizov , R.O. , and Belotserkovsky , M.A. Hardening of Gas-Thermal Coatings Minsk Bestprint 2004 192
- Podrigalo , M. , Klets , D. , Sergiyenko , O. , Gritsuk , I. et al. Improvement of the Assessment Methods for the Braking Dynamics with ABS Malfunction SAE Technical Paper 2018-01-1881 2018 https://doi.org/10.4271/2018-01-1881
- Lopata , L.A. , Medvedeva , N.A. , Tunik , T.M. , and Salii , S.G. Improvement of Sprayed Coatings World of Engineering and Technologies 8 54 2005 54 56
- Matveishin , E.N. Deposition of Layers with High Adhesion Strength by Methods of Arc Metallization Automatic Welding 8 2000 20 22
- Gritsuk , I.V. , Volkov , V. , Mateichyk , V. , Grytsuk , Y. et al. Information Model of V2I System of the Vehicle Technical Condition Remote Monitoring and Control in Operation Conditions SAE Technical Paper 2018-01-0024 2018 https://doi.org/10.4271/2018-01-0024
- Gritsuk , I.V. , Mateichyk , V. , Tsiuman , M. , Gutarevych , Y. et al. Reducing Harmful Emissions of the Vehicular Engine by Rapid After-Start Heating of the Catalytic Converter Using Thermal Accumulator SAE Technical Paper 2018-01-0784 2018 https://doi.org/10.4271/2018-01-0784
- Pokhmurska , G.V. , Dovgunik , V.M. , and Student , M.M. Wear Resistance of Laser-Modified Electric Arc Coatings from Cored Wire FMI-2 FKhММ 4 2003 61 64
- Podcherniaeva , I.A. Laser Reflow of Gas Thermal Coatings Based on Cortinite Technology and Body 2 1992 42 43
- Prokhorenkova , N.V. The Structure and Properties of Coatings Based on Ni Deposited by a Plasma Jet and Subjected to Electron Irradiation International School “Physics and Chemistry of Nanomaterials” Tomsk 2005 118 120
- Shipko , A.A. and Urban , I.G. Effect of Electron Beam Heating on the Structure and Properties of Detonation Coatings Vestnik of AS of Belarus 4 1992 8 14
- Vitiaz , P.A. , Azizov , R.O. , Belotserkovsky , M.A. , and Kukareko , V.A. Improving the Quality of Gas-Thermal Coatings from Wire Materials by Means of Chemical Heat Treatment Friction and Wear 24 6 2003 666 672
- Belotserkovsky , M.A. , Konstantinov , V.M. , and Tkachenko , G.A. Hardening by Chemical Heat Treatment of Coatings Obtained by Fast Spraying Steel Wires Surface Engineering, Welding: Proceedings of the International Symposium Minsk 2009 178 184
- Glebova , M.A. , Kornev , A.B. , Glebov , V.V. et al. Improving the Quality of Gas-Thermal Coatings by Heat Treatment with High-Frequency Currents and a Laser Beam Welding Production 6 2004 43 46
- Sokolov , Y.V. , Sadova , M.A. , and Popok , D.A. Heat Treatment of Sprayed Coatings Vest. Belarus Tech. Inst. 3 2004 40 41
- Liashenko , B.A. , Belotserkovsky , M.A. , Lopata , V.N. et al. Thermal Spraying and Ion Nitriding as a Promising Combination Proceedings of the 14th International Conference Svaliava - Kyiv 2014 79 80
- Gritsuk , I. , Aleksandrov , V. , Panchenko , S. , Kagramanian , A. et al. Features of Application Materials While Designing Phase Transition Heat Accumulators of Vehicle Engines SAE Technical Paper 2017-01-5003 2017 https://doi.org/10.4271/2017-01-5003
- Korobov , Y.S. Efficiency of Using Activated Arc Coating Metallization Welding Production 2 2005 47 50, 62, 64
- Hahanov , V. , Gharibi , W. , Litvinova , E. , Chumachenko , S. et al. Cloud-Driven Traffic Monitoring and Control Based on Smart Virtual Infrastructure SAE Technical Paper 2017-01-0092 2017 https://doi.org/10.4271/2017-01-0092
- Priadko , A.S. , Korobov , Yu.S. , and Lukanin , V.L. Activated Arc Metallization: The Characteristics of the Equipment and Its Application Films and Coatings 98: Proceedings of the 5th International Conference St. Petersburg 1998 249 251
- Belotserkovsky , M.A. , Pryadko , A.S. , and Cherepko , A.E. Technological Features and Areas of Using Hypersonic Metallization Innovations in Mechanical Engineering: Collection of Papers Minsk 2008 479 484
- Varbanets , R. , Karianskiy , S. , Rudenko , S. , Gritsuk , I. et al. Improvement of Diagnosing Methods of the Diesel Engine Functioning Under Operating Conditions SAE Technical Paper 2017-01-2218 2017 https://doi.org/10.4271/2017-01-2218
- Belotserkovsky , M.A. , Kukareko , V.A. , and Azizov , P.O. Obtaining Wear-Resistant Coatings by Activated Gas-Thermal Spraying Followed by Modifying Probl. Material Science 2 2004 77 87
- Priadko , A.S. , Dudan , A.V. , Brusilo , Y.V. et al. Choice of Equipment for Hardening and Restoring Automotive Transport Parts by Arc Spraying Polotsk, Bull. of Polotsk State University 3 2014 121 126
- Brusilo , Y.V. Choice of Equipment for Hardening and Restoring Parts of Piston Engines by Arc Spraying J. Aerospace Engineering and Technology Kharkiv 4 71 2010 38 42
- Karp , I.N. , Petrov , S.V. , and Rudoi , A.P. Installation for Arc Metallization in a Supersonic Flow of Natural Gas Combustion Products Welding Production 2 1991 22 23
- Belotserkovsky , M.A. , Priadko , A.S. , and Cherepko , A.E. 2002
- Buriakin , A.V. and Kuzmin , A.V. Electric Arc Metallization with Metal Spraying by Combustion Products of Hydrocarbon Fuels Welding Production 3 1993 7 9
- Belotserkovsky , M.A. Structural Anomalies in Steel Gas-Thermal Coatings and the Possibility of Their Use Strengthening Technologies and Coatings 10 2008 39 44
- Vitiaz , P.A. , Belotserkovsky , M.A. , Kukareko , V.A. et al. Structure and Properties of Coatings from Steel 40Kh1 Produced Using Various Methods for Gas-Thermal Spraying Physical mezomechanika 5 1 2002 15 22
- Gritsuk , I. , Volkov , V. , Gutarevych , Y. , Mateichyk , V. et al. Improving Engine Pre-Start and After-Start Heating by Using the Combined Heating System SAE Technical Paper 2016-01-8071 2016 https://doi.org/10.4271/2016-01-8071
- Potekhin , B.A. , Lobanov , M.N. , and Nasedkina , E.M. Influence of Unstable Austenitic Structure of Steel 9Kh18 on Cavitation and Abrasive Resistance Phys.-Chemical Mechanics of Materials 2 1976 116 118
- Liashenko , B.A. , Kuzin , N.O. , Solovykh , E.K. et al. Comparative Analysis of the Energy Intensity of Nitriding Methods Proceedings of the 14th International Conference Paris, France 2014 80 82
- Kharchenko , V.V. , Liashenko , B.A. , Kuriat , R.I. , and Isakhanov , G.V. Thermocyclic Nitriding as a Synthesis of Developments of the NAS of Ukraine Proceedings of the 12th International Seminar Svalyava - Kyiv 2012 287 290
- Kharchenko , V.V. , Liashenko , B.A. , Kuriat , R.I. , Rutkovsky , A.V. et al. 2013
- Gritsuk , I. , Gutarevych , Y. , Mateichyk , V. , and Volkov , V. Improving the Processes of Preheating and Heating after the Vehicular Engine Start by Using Heating System with Phase-Transitional Thermal Accumulator SAE Technical Paper 2016-01-0204 2016 https://doi.org/10.4271/2016-01-0204
- Liashenko , B.A. , Rutkovsky , A.V. , Kumurzhi , O.Y. et al. Use of Ion-Plasma Thermocyclic Nitriding to Increase Wear Resistance of High-Alloy Steel News of Zhytomyr Technological University 3 74 2015 28 33
- Kumurzhi , O.Yu. and Rutkovsky , A.V. Wear Resistance of Steel 40X13 after Hardening by the Method of Thermocyclic Ion-Plasma Nitriding under Abrasive Wear Collection of Papers “Problems of Friction and Wear” 57 2012 240 250