
Selective Catalytic Reduction on Filter Performance Testing on Non-road Diesel Engine
Technical Paper
2021-01-5054
ISSN: 0148-7191, e-ISSN: 2688-3627
Sector:
Event:
Automotive Technical Papers
Language:
English
Abstract
High-efficiency lean-burn compression ignition engines are expected to continue
to play an important role as a power source for non-road mobile machinery. The
challenge for these engines is that they suffer both high levels of nitrogen
oxide (NOx) and particulate matter (PM) emissions, and the
simultaneous reduction of these particular emissions is difficult due to the
trade-off relationship between NOx and PM. Consequently, achieving
the most stringent emission limits requires efficient exhaust aftertreatment.
Traditionally, NOx and PM have been controlled by separate
aftertreatment devices. However, such sequential system configurations have
several disadvantages, such as a large volume of the aftertreatment system. The
compact design of a selective catalytic reduction (SCR)-coated diesel
particulate filters (DPF), referred to as selective catalytic reduction on
filter (FSCR), allows the reduction in aftertreatment system volume and mass.
Another advantage is that the SCR can be placed closer to the engine to improve
SCR temperature behavior. The major challenge of the FSCR technology is the
interaction between the SCR and DPF functions. The present study examines the
operation of a state-of-the-art combined particulate filter and SCR catalyst
device as a part of an exhaust aftertreatment system on a high-speed non-road
diesel engine. Unlike previous studies, the goal was a complete ammonia
(NH3) slip-free operation. The main objective was to investigate
how the SCR properties—NOx conversion and NH3 slip—change
when the filter fills up with soot. In this context, tests with clean FSCR and
with soot-loaded FSCR were conducted at varying urea dosing. The soot-loaded
FSCR, compared with a clean one, showed a slightly (4-6%) lower NOx
reduction and higher (1-4 ppm) NH3 slip under identical operating
conditions. The results also indicated a decrease in NH3 storage
capacity upon soot loading. Finally, a supplementary flow-through SCR catalyst
was added downstream of the FSCR, and tests with FSCR only versus FSCR + SCR
were performed. Adding the second SCR allowed for higher urea dosing without
NH3 slip and, consequently, higher (+23%) NOx
conversions.
Authors
Topic
Citation
Spoof-Tuomi, K., Niemi, S., Ovaska, T., Nilsson, O. et al., "Selective Catalytic Reduction on Filter Performance Testing on Non-road Diesel Engine," SAE Technical Paper 2021-01-5054, 2021, https://doi.org/10.4271/2021-01-5054.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 |
Also In
References
- Lajunen , A. , Sainio , P. , Laurila , L. , Pippuri-Mäkeläinen , J. et al. Overview of Powertrain Electrification and Future Scenarios for Non-Road Mobile Machinery Energies 11 2018 1184 10.3390/en11051184
- Ratzinger , J.M. , Buchberger , S. , and Eichlseder , H. Electrified Powertrains for Wheel-Driven Non-road Mobile Machinery Automot. Engine Technol. 2020 1 13 10.1007/s41104-020-00072-z
- Leach , F. , Kalghatgi , G. , Stone , R. , and Miles , P. The Scope for Improving the Efficiency and Environmental Impact of Internal Combustion Engines Transportation Engineering 1 2020 100005 10.1016/j.treng.2020.100005
- Reitz , R.D. , Ogawa , H. , Payri , R. , Fansler , T. et al. The Future of the Internal Combustion Engine Int. J. Engine Res. 21 1 2020 3 10 10.1177/1468087419877990
- Belgiorno , G. , Boscolo , A. , Dileo , G. , Numidi , F. et al. Experimental Study of Additive-Manufacturing-Enabled Innovative Diesel Combustion Bowl Features for Achieving Ultra-Low Emissions and High Efficiency SAE Technical Paper 2020-37-0003 2020 https://doi.org/10.4271/2020-37-0003
- ERTRAC 2016 https://www.ertrac.org/uploads /documents_publications/Roadmap/2016-04-05_ICE_roadmap_edited%20version.pdf
- Carder , D. , Ryskamp , R. , Besch , M. , and Thiruvengadam , A. Emissions Control Challenges for Compression Ignition Engines Procedia IUTAM 20 2017 103 111 10.1016/j.piutam.2017.03.015
- Di Blasio , G. , Vassallo , A. , Pesce , F. , Beatrice , C. et al. The Key Role of Advanced, Flexible Fuel Injection Systems to Match the Future CO2 Targets in an Ultra-Light Mid-Size Diesel Engine SAE Int. J. Engines 12 2 2019 129 144 https://doi.org/10.4271/03-12-02-0010
- Beatrice , C. , Di Blasio , G. , and Belgiorno , G. Experimental Analysis of Functional Requirements to Exceed the 100kW/l in High-Speed Light-Duty Diesel Engines Fuel 207 2017 591 601 10.1016/j.fuel.2017.06.112
- Konstandopoulos , A.G. , Kostoglou , M. , Beatrice , C. et al. Impact of Combination of EGR, SCR, and DPF Technologies for the Low-Emission Rail Diesel Engines Emiss. Control Sci. Technol. 1 2015 213 225 10.1007/s40825-015-0020-0
- Tronconi , E. , Nova , I. , Marchitti , F. , Koltsakis , G. et al. Interaction of NO x Reduction and Soot Oxidation in a DPF with Cu-Zeolite SCR Coating Emiss. Control. Sci. Technol. 1 2 2015 134 151 10.1007/s40825-015-0014-y
- Watling , T.C. , Ravenscroft , M.R. , and Avery , G. Development, Validation and Application of a Model for an SCR Catalyst Coated Diesel Particulate Filter Catal Today 188 1 2012 32 41 10.1016/j.cattod.2012.02.007
- Czerwinski , J. , Zimmerli , Y. , Mayer , A. , D’Urbano , G. et al. Emission Reduction with Diesel Particle Filter with SCR Coating (SDPF) Emiss. Control Sci. Technol. 1 2015 152 166 10.1007/s40825-015-0018-7
- Johansen , K. Multi-Catalytic Soot Filtration in Automotive and Marine Applications Catal. Today 258 2015 2 10 10.1016/j.cattod.2015.06.001
- Tan , J. , Solbrig , C. , and Schmieg , S.J. The Development of Advanced 2-Way SCR/DPF Systems to Meet Future Heavy-Duty Diesel Emissions SAE Technical Paper 2011-01-1140 2011 https://doi.org/10.4271/2011-01-1140
- Colombo , M. , Koltsakis , G. , and Koutoufaris , I. A Modeling Study of Soot and de-NO x Reaction Phenomena in SCRF Systems SAE Technical Paper 2011-37-0031 2011 https://doi.org/10.4271/2011-37-0031
- Tang , W. , Youngren , D. , SantaMaria , M. , and Kumar , S. On-Engine Investigation of SCR on Filters (SCRoF) for HDD Passive Applications SAE Int. J. Engines 6 2 2013 862 872 https://doi.org/10.4271/2013-01-1066
- Song , X. , Johnson , J.H. , and Naber , J.D. A Review of the Literature of Selective Catalytic Reduction Catalysts Integrated into Diesel Particulate Filters Int. J. Engine Res. 16 6 2015 738 749 10.1177/1468087414545094
- Schrade , F. , Brammer , M. , Schaeffner , J. , Langeheinecke , K. et al. Physico-Chemical Modeling of an Integrated SCR on DPF (SCR/DPF) System SAE Int. J. Engines 5 3 2012 958 974 https://doi.org/10.4271/2012-01-1083
- Mihai , O. , Tamm , S. , Stenfeldt , M. , Wang-Hansen , C. et al. Evaluation of an Integrated Selective Catalytic Reduction-Coated Particulate Filter Ind. Eng. Chem. Res. 54 47 2015 11779 11791 10.1021/acs.iecr.5b02392
- Marchitti , M. , Nova , I. , and Tronconi , E. Experimental Study of the Interaction between Soot Combustion and NH 3 -SCR Reactivity over a Cu-Zeolite SDPF Catalyst Catal. Today 267 2016 110 118 10.1016/j.cattod.2016.01.027
- Purfürst , M. , Naumov , S. , Langeheinecke , K.-J. , and Gläser , R. Influence of Soot on Ammonia Adsorption and Catalytic DeNO x -Properties of Diesel Particulate Filters Coated with SCR-Catalysts Chem. Eng. Sci. 168 2017 423 436 10.1016/j.ces.2017.04.052
- Willems , F. https://www.fs.isy.liu.se/Edu/Courses/AftertreatmentMaC/Exercise_10_solution.pdf
- Northrop , W.F. , Bohac , S.V. , Chin , J.-Y. , and Assanis , D.N. Comparison of Filter Smoke Number and Elemental Carbon Mass From Partially Premixed Low Temperature Combustion in a Direct-Injection Diesel Engine J Eng Gas Turbine Power 133 10 2011 102804 10.1115/1.4002918
- Christian , V.R. , Knopf , F. , Jaschek , A. , and Schindler , W. Eine neue Messmethodik der Bosch-Zahl mit erhöhter Empfindlichkeit Motortech. Z. 54 1 1993 16 22
- Beatrice , C. , Rispoli , N. , Di Blasio , G. , Patrianakos , G. et al. Emission Reduction Technologies for the Future Low Emission Rail Diesel Engines: EGR vs SCR SAE Technical Paper 2013-24-0087 2013 https://doi.org/10.4271/2013-24-0087
- Koebel , M. , Madia , G. , and Elsener , M. Selective Catalytic Reduction of NO and NO 2 at Low Temperatures Catal. Today 73 3-4 2002 239 247 10.1016/S0920-5861(02)00006-8
- Rappé , K.G. Integrated Selective Catalytic Reduction-Diesel Particulate Filter Aftertreatment: Insights into Pressure Drop, NO x Conversion, and Passive Soot Oxidation Behavior Ind. Eng. Chem. 53 45 2014 17547 17557 10.1021/ie502832f
- Colombo , M. , Nova , I. , and Tronconi , E. A Comparative Study of the NH 3 -SCR Reactions over a Cu-Zeolite and a Fe-Zeolite Catalyst Catal. Today 151 3-4 2010 223 230 10.1016/j.cattod.2010.01.010
- Maunula , T. , and Wolff , T. Durable Copper and Iron SCR catalysts for Mobile Diesel and Dual-Fuel Applications SAE Technical Paper 2016-01-2214 2016 https://doi.org/10.4271/2016-01-2214
- Kamasamudram , K. , Currier , N. , Szailer , T. , and Yezerets , A. Why Cu- and Fe-Zeolite SCR Catalysts Behave Differently at Low Temperatures SAE Int. J. Fuels Lubr. 3 1 2010 664 672 https://doi.org/10.4271/2010-01-1182
- Park , S.-Y. , Narayanaswamy , K. , Schmieg , S.J. , and Rutland , C.J. A Model Development for Evaluating Soot-NO x Interactions in a Blended 2-Way Diesel Particulate Filter/Selective Catalytic Reduction Ind. Eng. Chem. Res. 51 2012 15582 15592 10.1021/ie3020796