This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Evolution and Future Development of Vehicle Fuel Specification in China
Technical Paper
2021-01-1201
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Fuel quality has a significant influence on the combustion engine operation. In recent years the increasing concerns about environmental protection, energy saving, energy security and the requirements of protecting fuel injection and aftertreatment systems have been major driving forces for the Chinese fuel specification evolution. The major property changes in the evolution of Chinese national gasoline and diesel standards are introduced and the reasons behind these changes are analyzed in this paper. The gasoline fuel development from State I to State VI-B involved a decrease of sulfur, manganese, olefins, aromatics and benzene content. The diesel fuel quality improvement from State I to State VI included achieving low sulfur fuels and a cetane number (CN) increase. Provincial fuel standards, stricter than corresponding national standards, were implemented in economically developed areas in the past. Currently only Beijing is still implementing regional standards with national standards becoming increasingly stringent. The key fuel properties between China, EU and US standards are compared and discussed. The automotive fuel quality in China has reached the same level as in Europe, however the percentages of aromatics and olefins in gasoline fuel and polycyclic aromatic hydrocarbons (PAH) in diesel fuel are still higher than the limits in California standards. In addition, the applications of alternative fuels such as ethanol, methanol and biodiesel are briefly discussed. The implementation of Ethanol-gasoline grades has started in pan-China, while methanol and biodiesel will not be widely applied in the near future. Finally, future trends for the automotive fuel applications in China are analyzed and predicted.
Authors
Topic
Citation
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 |
Also In
References
- Ling , F. Historic Development of High Octane Number Gasoline in China (One) Sino-Global Energy 14 12 2009 41 cnki:sun:syzw.0.2009-12-009
- Ling , F. Historic Development of High Octane Number Gasoline in China (Two) Sino-Global Energy 14 12 2009 88 cnki:sun:syzw.0.2009-12-020
- http://www.chyxx.com/industry/201709/556736.html
- https://baijiahao.baidu.com/s?id=1622796874415341134&wfr=spider&for=pc
- Kameoka , A. and Tsuchiya , K. Influence of Ferrocene on Engine and Vehicle Performance SAE Technical Paper 2006-01-3448 2006 https://doi.org/10.4271/2006-01-3448
- Benson , J. and Dana , G. The Impact of MMT Gasoline Additive on Exhaust Emissions and Fuel Economy of Low Emission Vehicles (LEV) SAE Technical Paper 2002-01-2894 2002 https://doi.org/10.4271/2002-01-2894
- Nomura , T. , Ueura , H. , Tanaka , Y. , IIda , Y. et al. The Effect of Gasoline Metallic Additives on Low Speed Pre-Ignition SAE Technical Paper 2018-01-0936 2018 https://doi.org/10.4271/2018-01-0936
- Aikawa , K. , Sakurai , T. , and Jetter , J. Development of a Predictive Model for Gasoline Vehicle Particulate Matter Emissions SAE Int. J. Fuels Lubr. 3 2 2010 610 622 https://doi.org/10.4271/2010-01-2115
- Henkel , S. , Hardalupas , Y. , Taylor , A. , Conifer , C. et al. Injector Fouling and Its Impact on Engine Emissions and Spray Characteristics in Gasoline Direct Injection Engines SAE Int. J. Fuels Lubr. 10 2 2017 287 295 https://doi.org/10.4271/2017-01-0808
- Kar , A. , Huisjen , A. , Aradi , A. , Reitz , J. et al. Assessing the Impact of Lubricant and Fuel Composition on LSPI and Emissions in a Turbocharged Gasoline Direct Injection Engine SAE Int. J. Adv. & Curr. Prac. in Mobility 2 5 2020 2568 2580 https://doi.org/10.4271/2020-01-0610
- Jorgensen , S. and Benson , J. A Correlation Between Tailpipe Hydrocarbon Emissions and Driveability SAE Technical Paper 962023 1996 https://doi.org/10.4271/962023
- Dec. 2018
- National Energy Administration
- Feb. 2009
- Beijing Bureau of Quality and Technical Supervision
- European Committee for Standardization Oct. 2012
- ASTM Committee D02 on Petroleum Products Jan. 2019
- California Air Resources Board Feb. 2014
- European Committee for Standardization May 2017
- July 2019
- California Air Resources Board
- Apr. 2009
- Ministry of Industry and Information Technology http://www.gov.cn/xinwen/2019-03/20/content_5375348.htm
- Kalghatgi , G. Fuel Anti-Knock Quality - Part I. Engine Studies SAE Technical Paper 2001-01-3584 2001 https://doi.org/10.4271/2001-01-3584
- Kalghatgi , G. Auto-Ignition Quality of Practical Fuels and Implications for Fuel Requirements of Future SI and HCCI Engines SAE Technical Paper 2005-01-0239 2005 https://doi.org/10.4271/2005-01-0239
- Kalghatgi , G. and Head , R. The Available and Required Autoignition Quality of Gasoline - Like Fuels in HCCI Engines at High Temperatures SAE Technical Paper 2004-01-1969 2004 https://doi.org/10.4271/2004-01-1969
- Hildingsson , L. , Kalghatgi , G. , Tait , N. , Johansson , B. et al. Fuel Octane Effects in the Partially Premixed Combustion Regime in Compression Ignition Engines SAE Technical Paper 2009-01-2648 2009 https://doi.org/10.4271/2009-01-2648
- Shuai , S. , Wang , B. , Yang , H. , Wang , Z. et al. Combustion and Emission Characteristics of Multiple Premixed Compression Ignition (MPCI) Mode with Low Octane Gasoline Fuels Energy Procedia 61 2014 2014 2127 2131 10.1016/j.egypro.2014.12.091
- Cracknell , R. , Bastaert , D. , Houille , S. , Châtelain , J. et al. Assessing the Efficiency of a New Gasoline Compression Ignition (GCI) Concept SAE Technical Paper 2020-01-2068 2020 https://doi.org/10.4271/2020-01-2068
- Sellnau , M. , Moore , W. , Sinnamon , J. , Hoyer , K. et al. GDCI Multi-Cylinder Engine for High Fuel Efficiency and Low Emissions SAE Int. J. Engines 8 2 2015 775 790 https://doi.org/10.4271/2015-01-0834
- Sellnau , M. , Foster , M. , Moore , W. , Sinnamon , J. et al. Second Generation GDCI Multi-Cylinder Engine for High Fuel Efficiency and US Tier 3 Emissions SAE Int. J. Engines 9 2 2016 1002 1020 https://doi.org/10.4271/2016-01-0760
- Sellnau , M. , Hoyer , K. , Moore , W. , Foster , M. et al. Advancement of GDCI Engine Technology for US 2025 CAFE and Tier 3 Emissions SAE Technical Paper 2018-01-0901 2018 https://doi.org/10.4271/2018-01-0901