This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Influence of Powertrain Mount Stiffness Progressivity on Buzz, Squeak & Rattle Noise for Electric Vehicle
Technical Paper
2021-01-1089
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
For a modified electric vehicle on the same internal combustion engine (ICE) platform, the primary consideration is to have no change in long member and pendulum type conventional engine mounting system to save development cost and timeline. Electric vehicle (EV) powertrain is comparatively lighter w.r.t the ICE. As a result, the engine mount’s static preload setting point or powertrain centre of gravity under static powertrain load gets changed resulting in a change in stiffness for the same engine mount.
As the static stiffness changes, the dynamic stiffness and modal frequency also change. The 6 degrees of freedom (DOF) modal frequency has almost no impact on powertrain modes as EV powertrain modes, mainly, the motor frequency, is much higher than engine mount Eigen modes.
In this scenario, the gap management gets disturbed due to less static preload, and non-linearity gets affected. This paper will explain a case study on a modified EV, the change in modal map, its impact vis-a-vis ICE, and how this static stiffness progressivity issue is addressed to resolve buzz, squeak and rattle (BSR) noise.
Recommended Content
Magazine Issue | Automotive Engineering: March 2021 |
Technical Paper | Antilock Braking Control of Electric Vehicles with Electric Brake |
Technical Paper | Intelligent DC Power Management System |
Citation
Hazra, S. and K, J., "Influence of Powertrain Mount Stiffness Progressivity on Buzz, Squeak & Rattle Noise for Electric Vehicle," SAE Technical Paper 2021-01-1089, 2021, https://doi.org/10.4271/2021-01-1089.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 |
Also In
References
- Hazra , S. and Gupta , I. Engine Mount Design Technique to Address Vehicle Level Buzz, Squeak & Rattle IEEE Transportation Electrification Conference (ITEC-India) 2017 10.1109/ITEC-India.2017.8333721
- Hazra , S. and Deshmukh , S. Engine Mount Stopper Design Techniques to Balance Vehicle Level Buzz, Squeak, Rattle and Durability SAE Technical Paper 2020-01-0401 2020 https://doi.org/10.4271/2020-01-0401
- Bu , S.-J. , Moon , S.-M. , and Cho , S.-B. BSR (Buzz, Squeak, Rattle) Noise Classification Based on a Convolutional Neural Network with Short-Time Fourier Transform Noise-Map The Journal of the Acoustical Society of Korea 37 4 2018 256 261 10.7776/ASK.2018.37.4.256
- Ahn , S. and Ih , K.D. Basic Principle of BSR (Buzz, Squeak, Rattle) Noise According to the Generation Mechanism The Journal of the Acoustical Society of Korea 37 5 2018 309 316 10.7776/ASK.2018.37.5.309
- Kwak , Y. , Lee , J. , and Park , J. Experimental Study to Investigate the Structural Integrity of Welded Vehicle Structure for BSR (Buzz, Squeak, Rattle) Noise by Vibration Measurement The Journal of the Acoustical Society of Korea 38 3 2019 334 339 10.7776/ASK.2019.38.3.334
- Zhu , D. , Pritchard , E.G.D. , and Silverberg , L.M. A New System Development Framework Driven by a Model-Based Testing Approach Bridged by Information Flow IEEE Systems Journal 12 3 2018 2917 2924 10.1109/JSYST.2016.2631142