This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Analysis and Optimization of the Idle Sound Quality Based on RBF Prediction Model
Technical Paper
2021-01-0660
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Event:
SAE WCX Digital Summit
Language:
English
Abstract
Idle sound quality of four-cylinder DI gasoline engine is predicted and optimized. The objective parameters of psychoacoustics such as loudness, roughness, sharpness, tonality, fluctuation, and interference are selected for objective evaluation. The numerical valuation method is used to evaluate the 21 engine noise samples at the idle condition. The Kriging, RBF, and RSM prediction methods are respectively used to establish the subjective and objective regression model. The prediction results are compared with the actual subjective evaluation results and show that the RBF method has the highest consistency with the correlation coefficient is 0.912. The sensitivity model of objective evaluation parameters of sound quality based on RBF is established. The contribution of objective evaluation parameters that affect the idling sound quality is calculated quantitatively. The contribution of sharpness to the sound quality of the gasoline engine is the largest (39.6%), followed by loudness, which is 18.2%. Through the dynamic characteristics analysis of the front-end accessory system (FEDA), the common rail pressure simulation of the high-pressure fuel injection system, the modal analysis of the structure, and the transfer path analysis (TPA), then the combinatorial optimization measures are put forward. According to the RBF regression model prediction results, the subjective evaluation result for this engine after optimization is significantly higher than the original engine.
Recommended Content
Authors
Citation
Maorong, Y., Jingsi, W., and Rong, B., "Analysis and Optimization of the Idle Sound Quality Based on RBF Prediction Model," SAE Technical Paper 2021-01-0660, 2021, https://doi.org/10.4271/2021-01-0660.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 | ||
| Unnamed Dataset 5 | ||
| Unnamed Dataset 6 | ||
| Unnamed Dataset 7 | ||
| Unnamed Dataset 8 | ||
| Unnamed Dataset 9 |
Also In
References
- Hiuying , L. Analysis of Vibration Characteristics and Radiated Noise of Main Parts of the Diesel Engine Journal of Agricultural Machinery 344 140 141 2003
- Pengfei , Z. Radiation Sound Prediction and Optimization of Single Cylinder GasolineEngine Based on Acoustic Quality Tianjin Tianjin University 2015
- Keiper , W. Sound Quality Evaluation in the Product Cycle Acta Acustica United with Acustica 83 5 784 788 1997
- Jekosch , U. Meaning in the Context of Sound Quality Assessment Acta Acustica United with Acustica 85 5 681 684 1999
- Jiguang , J. Research on Quality Analysis of Vehicle Interior Noise and Selective Noise Control Method Jilin Jilin University 2012
- Schiffbänker , H. , Brandl , F.K. , and Thien , G.E. Development and Application of an Evaluation Technique to Assess the Subjective Character of Engine Noise SAE Technical Paper 911081 1991 https://doi.org/10.4271/911081
- Hussain , M. , Gölles , J. , Ronacher , A. et al. Statistical Evaluation of an Annoyance Index for Engine Noise Recording SAE Technical Paper 911080 1991 https://doi.org/10.4271/911080
- Gequn , S. and Ning , L. Advance in Sound Quality Research for Noise of Vehicle and its Engine Automotive Engineering 24 5 403 407 2002
- Noumura , K. and Yoshida , J. Perception Modeling and Quantification of Sound Quality in Cabin SAE Technical Paper 2003-01-1514 2003 https://doi.org/10.4271/2003-01-1514
- Noumura , K. and Yoshida , J. Quantification of Sound Quality Car Interior Sounds Perceived by General Public in Different Markets Journal of Society Automobile Engineering 34 4 187 193 2003
- Zongwei , L. Research on Model Analysis and Adaptive Active Control for Sound Quality of Vehicle Interior Noise Jilin Jilin University 2007
- Shuangji , C. and Duanshi , C. Sound Quality Preference Evaluation for Car Interior Noise Based on Psychoacoustic Parameters Noise and Vibration Control 6 3 45 47 2005
- Liang , Y. and Kean , C. Jury Studies of Sound Quality for Low Frequency Noise Technical Acoustics 25 6 540 546 2006
- Jian , C. , Yang , W. , and Weiyi , L. An Investigation into the Test Methods for Subjective Evaluation of Vehichle Sound Quality Automotive Engineering 31 41 389 392 2009
- Sottek , R. Modeling Engine Roughness SAE Int. J. Engines 2 1 1891 1899 2009 https://doi.org/10.4271/2009-01-2153
- Wang , D. and Fang , L. Research on Body-in-White Lightweight Based on Multidisciplinary Design Optimization Journal of Jilin University 45 1 29 37 2015
- Deming , L. and Xinping , Y. Multi-Objective Intelligent Optimization Algorithm and Its Application Beijing Science Press 2009 41 50
- Cao , L. and Tay , F. Feature Selection for Support Vector Machines in Financial Time Series Forecasting Intelligent Data Engineering and Automated Learning 2000
- Bo , Z. , Chuanxing , B. , and Liang , X. A Study on the Evaluation Method of Vehichle Door Closing Sound Quality Based on Articicial Neural Network Model Automotive Engineering 33 11 1003 1006 2011
- Chowdhury , S. and Yedavalli , R.K. Vibration of High Speed Helical Geared Shaft Systems Mounted on Rigid Bearings International Journal of Mechanical Sciences 142-143 176 190 2018
- Chowdhury , S. and Yedavalli , R.K. Dynamics of Belt-Pulley-Shaft Systems Mechanism and Machine Theory 98 199 215 2016
- Yuyang , N. Isight Parameter Optimization Theory and an Example Beijing Beijing University of Aeronautics and Astronautics Press 2012 95 103
- Xiangkun , Z. , Wenbin , S. , and Zhichao , H. Rotation Vibration Modeling and Parameters Optimization Design of Engine Front end Accessory Drive System with Overrunning Alternator Decoupler Transactions of CSICE 29 4 355 363 2011
- Hohkita , A. Noise Reduction in Gasoline DI Engines SAE Technical Paper 2011-01-0930 2011 https://doi.org/10.4271/2011-01-0930