This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Calculation and Optimization Methods for the Dynamic Performances of a Power-Train-Subframe Mounting System
Technical Paper
2021-01-0658
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Event:
SAE WCX Digital Summit
Language:
English
Abstract
A dynamic performance calculating model for a powertrain-subframe mounting system (PSMS) is presented. Calculation methods for determining the dynamic displacements of a powertrain center of gravity (CG), the dynamic displacements of a subframe CG and the dynamic reaction forces of each mount in a PSMS under ground and motor shake excitation are developed in this paper. An optimization procedure based on the genetic algorithm and SQP is developed for reducing resonance peaks of the reaction forces at mounts. A generic PSMS with three powertrain-subframe mounts and four subframe-body mounts is used to validate the optimization method. The optimization results demonstrate that the results using the optimization procedure can effectively reduce the reaction forces at mounts.
Recommended Content
Authors
Citation
Fang, Z., Zhen, R., and Li, R., "Calculation and Optimization Methods for the Dynamic Performances of a Power-Train-Subframe Mounting System," SAE Technical Paper 2021-01-0658, 2021, https://doi.org/10.4271/2021-01-0658.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 | ||
Unnamed Dataset 7 | ||
Unnamed Dataset 8 | ||
Unnamed Dataset 9 |
Also In
References
- Shangguan , W.B. , and Wu , J. Modelling of Dynamic Performances for Hydraulic Engine Mounts Using Fractional Derivative and Optimisation of Powertrain Mounting Systems [J] International Journal of Vehicle Design 47 1/2/3/4 215 233 2008
- Shangguan , W.B. , and Zhao , Y. Dynamic Analysis and Design Calculation Methods for Powertrain Mounting Systems [J] International Journal of Automotive Technology 8 2007
- Shangguan , B.W. Engine Mounts and Powertrain Mounting Systems: A Review [J] International Journal of Vehicle Design 49 4 237 258 2009
- Shangguan , W.B. , Liu , X.A. , Lv , Z.P. et al. Design Method of Automotive Powertrain Mounting System Based on Vibration and Noise Limitations of Vehicle Level [J] Mechanical Systems and Signal Processing 2016
- Qin , W. , Shangguan , W.B. , Luo , G. et al. A Method for Estimating Mount Isolations of Powertrain Mounting Systems [J] Journal of Sound and Vibration 426 278 295 2018
- Jeong , T. , and Singh , R. Analytical Methods of Decoupling the Automotive Engine Torque Roll Axis [J] Journal of Sound and Vibration 234 1 85 114 2000
- Park , J.Y. , and Singh , R. Effect of Non-Proportional Damping on the Torque Roll Axis Decoupling of an Engine Mounting System [J] Journal of Sound and Vibration 313 3-5 841 857 2008
- Hu , J.F. , and Singh , R. Improved Torque Roll Axis Decoupling Axiom for a Powertrain Mounting System in the Presence of a Compliant Base [J] Journal of Sound and Vibration 331 7 1498 1518 2012
- Liette , J. , Dreyer , J.T. , and Singh , R. Critical Examination of Isolation System Design Paradigms for a Coupled Powertrain and Frame: Partial Torque Roll Axis Decoupling Methods Given Practical Constraints [J] Journal of Sound and Vibration 333 26 7089 7108 2014
- Xiaoang , L. , Wenbin , S. , Jihong , Q. , et al. Calculation of Natural Frequencies for a Powertrain Using Different Models [J] Journal of Vibration, Measurement & Diagnosis 2016 2 269 275
- Shangguan , W.B. , and Hou , Z. Strategies and Calculation Methods for Automotive Powertrain Motion Control under Quasi-Static Loads [J] Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering 220 8 1131 1138 2006
- Shangguan , W.B. , and Chen , D.M. A Method for Calculating the Displacements of a Powertrain and Mounts in a Powertrain Mounting System Including Torque Struts Under Quasi-static Loads [J] Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 226 5 634 647 2012
- Chen , D.M. , Shangguan , W.B. , and Zhang , W. The Design Strategies and Calculation Methods for Powertrain Mounting System with Multi-Powertrain [J] International Journal of Vehicle Design 60 1/2 3 19 2012
- Sirafi , M. , and Qatu , M. Accurate Modeling for the Powertrain and Subframe Modes SAE Technical Paper 2003-01-1469 2003 https://doi.org/10.4271/2003-01-1469
- Chowdhury , S. , and Yedavalli , R.K. Dynamics of Low Speed Geared Shaft Systems Mounted on Rigid Bearings [J] Mechanism and Machine Theory 2017
- Chowdhury , S. , and Yedavalli , R.K. Vibration of High Speed Helical Geared Shaft Systems Mounted on Rigid Bearings [J] International Journal of Mechanical Sciences 176 190 2018
- Chowdhury , S. , and Yedavalli , R.K. Dynamics of Belt-Pulley-Shaft Systems [J] Mechanism and Machine Theory 2016