This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Evolution of Phenolic Formaldehyde Based Hybrid Polymer Matrix Composite (PMC) Reinforced with Silicon Carbide and Fly Ash
Technical Paper
2021-01-0358
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Event:
SAE WCX Digital Summit
Language:
English
Abstract
Flyash and Silicon carbide reinforced phenolic formaldehyde-based hybrid polymer matrix composites (PMC) were fabricated with various weight ratios such as 8%, 12%, and 16%, respectively followed by their mechanical characterization such as tensile, flexural, density, impact and hardness properties as per the ASTM standards. The hand layup method was used to fabricate the PMC. The tensile behavior of PMC has revealed that it is highly dependent on the weight fraction of resin i.e. followed a consistent reduction with the increment in the flyash and silicon carbide contents. Whereas the density, impact and hardness behavior have observed a gradual enhancement upto 12% weight ratio of flyash and silicon carbide but thereafter it has been decreased. Similarly, the flexural behavior of PMC has decreased due to the addition of flyash and silicon carbide. Further, the scanning electron microscopy (SEM) analysis was carried out to study the monography of the fabricated specimens with various weight ratios at varying layers with magnification in the range of 550X to 10kX.
Authors
Citation
Kumar, J., Malkapuram, D., and Katiyar, J., "Evolution of Phenolic Formaldehyde Based Hybrid Polymer Matrix Composite (PMC) Reinforced with Silicon Carbide and Fly Ash," SAE Technical Paper 2021-01-0358, 2021, https://doi.org/10.4271/2021-01-0358.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 |
Also In
References
- Boccaccini , A. , Bucker , M. , and Jorgbosser
- Naresh , K. , Kumar , M. , Kumar , P. , Krishana , V. , and Srinivas Rao , D. Experimental Investigation on Mechanical Properties of Coal Ash Reinforced Glass Fiber Polymer Matrix Composites
- Patnaik , A. , Satapathy , A. , Chand , N. , Barkoula , N.M. , and Biswas , S. Solid Particle Erosion wear Characteristic of Fiber and Particulate Filled Polymer Composites
- Hussain , F. , Hojjati , M. , Okamoto , M. , and Gorga , R.E. Polymer Matrix Nanocomposites Processing Manufacturing and Supplication Journal of Composite Materials 1511 2006 40 2006
- Atikler , U. and Basalip , D. Mechanical and Morphological Properties of Recycled High-Density Polyethylene, Filled with Calcium Carbonate and Fly Ash 2006
- Alomayri , T. , Fua , S. , and Loe , I.M. Characterization of Carbon Fiber -Reinforced Geo-Polymer Composites
- Shao-Yun , F. , Xi-Qiao , F. , Launce , B. , and Mai , Y.-W. Effects of Particle Size, Particle Matrix Interface Adhesion and Particle Loading on Mechanical Properties of Particulate Polymer Composites 2007
- Chaowasakoo , T. and Sombatsompop , N. Mechanical and Morphological Properties of Fly Ash/Epoxy Composites Using Conventional Thermal and Micro Wave Curing Methods 2006
- Yadongpeyton , L. and Lee , R. White Composite Material Composed of Fly Ash and Waste Polyethylene Terephthalate 2003
- Dadkar , N. , Bharats , T. , and Bhabanik , S. Evaluations of Fly Ash Filled and Aramid Fiber Reinforced Hybrid Polymer Matrix Composites for Friction Braking Application
- Alirezav , A.K. and Nasser , S. Dynamic Mechanical Analysis of Fly Ash Skilled Poly Urea 920 903
- Bose , S. and Mahanwar , P. Effect of Fly Ash on the Mechanical. Thermal Dielectric Rheological and Morphological Properties of Filled Nylon6 3 2 65 89 2004
- Alamri , H. and Low , I.M. Characterization of Epoxy Hybrid Composites Filled with Cellulose Fibers and Nano-SiC J Appl Polymer Sci 126 E221 E231 2012
- Rahman , M.M. , Rashid , M.H. , Hossain , M.A. , and Hasan , M.T. Performance Evaluation of Bamboo Reinforced Concrete Beam Int J Eng Technol 11 4 142 146 2011