This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Selection of Different Strategies of Exhaust Gas Thermal Management for Optimum Fuel Economy
Technical Paper
2020-28-0339
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
To tackle the problem arising due to emissions and to reduce them, complex after-treatment system is used. For efficient working of the after-treatment system it must operate at enough high temperature even at low loads for better conversion efficiency. Also, there is different temperature requirements for different catalyst used in SCR (Selective catalyst reduction) system. For this, various on engine strategies are implemented on modern diesel engines such as multiple fuel injection, late fuel injection, high fuel injection pressure and exhaust gas recirculation. Thermal management of exhaust gasses is an operating condition which must be triggered when there is need of elevated temperatures for efficient functioning of the after-treatment system. Thermal management includes SCR thermal management and regeneration. The rise in the exhaust gas temperature can be obtained by operating air handling units such as exhaust throttle valve, air throttle valve, variable geometry turbocharger, etc. Less work has been done on exhaust gas thermal management considering BSFC (Brake specific fuel consumption). The research paper gives idea about different exhaust gas thermal management strategies that can be used which will give better BSFC. The different experiments include multiple pulse injection (2 pulse, 3 pulse and 4 pulse), thermal management with exhaust throttle valve actuation, thermal management by varying rail pressure and start of injection for achieving required exhaust gas temperature.
Recommended Content
Topic
Citation
BAWACHE, K., Chila, S., Balasubramanian, K., and Rohokale, D., "Selection of Different Strategies of Exhaust Gas Thermal Management for Optimum Fuel Economy," SAE Technical Paper 2020-28-0339, 2020, https://doi.org/10.4271/2020-28-0339.Also In
References
- Light-Holets , J.K. , Larry Bruner , C. , and Langenderfer , D. 2015
- Guo , L. and Frazier , T.R. 2013
- McGill , R. , Khair , M. , Lambert , C. , Hammerle , R. et al. Technical Advantages of Urea SCR for Light-Duty and Heavy-Duty Diesel Vehicle Applications SAE Technical Paper 2004-01-1292 2004 https://doi.org/10.4271/2004-01-1292
- Bouchez , M. , and Dementhon , J.B. Strategies for the Control of Particulate Trap Regeneration SAE Technical Paper 2001-01-0472 2001 https://doi.org/10.4271/2001-01-0472
- Magee , M. 2013
- Addy Majewski , W. 2011
- http://www.dieselnet.com/tech/dpf.php
- Addy Majewski , W. 2011
- http://www.dieselnet.com/tech/cat_scr.php
- Kass , M. , Parks , J. , Hu_ , S. , and Storey , J. Characterization of In-Cylinder Techniques for Thermal Management of Diesel Aftertreatment SAE Technical Paper 2007-01-3997 2007 https://doi.org/10.4271/2007-01-3997
- Corti , E. , Moro , D. , De Cesare , M. , Cavina , N. et al. Thermal Management Strategies for SCR after Treatment Systems SAE Technical Paper 2013-24-0153 2013 https://doi.org/10.4271/2013-24-0153
- Yokota , H. , Shimizu , T. , Ninomiya , H. , Akiyoshi , T. et al. Development of Efficient Urea-SCR Systems foe EPA 2010 - Compliant Medium Duty Diesel Vehicles SAE Technical Paper 2011-01-1309 2011 https://doi.org/10.4271/2011-01-1309
- Schnorbus , T. , Severin , C. , Kolbeck , A.F. , Honarder , S. et al. Exhaust Temperature Management for Diesel Engine Assessment of Engine Concepts and Calibration Strategies with Regard to Fuel Penalty SAE Technical Paper 2011-24-0176 2011 https://doi.org/10.4271/2011-24-0176
- Shangar Ramani , V. , Muthusamy , A. , and Bhachchu , G. Reduction of Diesel Engine Combustion Noise through Various Injection Strategies SAE Technical Paper 2019-26-0211 2019 https://doi.org/10.4271/2019-26-0211