Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Three-Dimensional Multi-phase Physics-Based Modeling Methodology to Study Engine Cylinder-kit Assembly Tribology and Design Considerations- Part I

Journal Article
2020-01-2230
ISSN: 2641-9645, e-ISSN: 2641-9645
DOI: https://doi.org/10.4271/2020-01-2230
Published September 15, 2020 by SAE International in United States
Three-Dimensional Multi-phase Physics-Based Modeling Methodology to Study Engine Cylinder-kit Assembly Tribology and Design Considerations- Part I
Sector:
Citation: Chowdhury, S., Kharazmi, A., Atis, C., and Schock, H., "Three-Dimensional Multi-phase Physics-Based Modeling Methodology to Study Engine Cylinder-kit Assembly Tribology and Design Considerations- Part I," SAE Int. J. Adv. & Curr. Prac. in Mobility 3(1):561-582, 2021, https://doi.org/10.4271/2020-01-2230.
Language: English

References

  1. Atis , C. , Chowdhury , S.S. , Ayele , Y. , Stuecken , T. et al. Ultra-Lean and High EGR Operation of Dual Mode, Turbulent Jet Ignition (DM-TJI) Engine with Active Pre-chamber Scavenging SAE Technical Paper 2020-01-1117 2020 https://doi.org/10.4271/2020-01-1117
  2. Richardson , D.E. Review of power cylinder friction for diesel engines J. Eng. Gas Turbines Power 122 4 506 519 2000
  3. Hill , S.H. , and Sytsma , S.J. A Systems Approach to Oil Consumption SAE Technical Paper 910743 1991 https://doi.org/10.4271/910743
  4. Ingwersen , J. , Pederson , P.S. , Nielsen , T. , Larsen , E. , and Fenger , J.
  5. Trier , C.J. , Coates , D.S. , Fussey , D.E. , and Rhead , M.M. The contribution of lubricating oil to diesel exhaust emissions Sci. Total Environ. 93 167 174 1990
  6. Sakurai , H. , Tobias , H.J. , Park , K. , Zarling , D. et al. On-line measurements of diesel nanoparticle composition and volatility Atmos. Environ. 37 9-10 1199 1210 2003
  7. Ruddy , B.L. , Dowson , D. , Economou , P.N. , and Baker , A.J.S. Piston-ring lubrication. Part III. The influence of ring dynamics and ring twist Energy Conserv. through Fluid Film Lubr. Technol. Front. Res. Des. 191 215 1979
  8. Gamble , R.J. , Priest , M. , and Taylor , C.M. Detailed analysis of oil transport in the piston assembly of a gasoline engine Tribol. Lett. 14 2 147– 156 2003 10.1023/A:1021712506331
  9. Tian , T. , Rabute , R. , Wong , V.W. , and Heywood , J.B. Effects of Piston-Ring Dynamics on Ring/Groove Wear and Oil Consumption in a Diesel Engine SAE Technical Paper 970835 1997 https://doi.org/10.4271/970835
  10. Tian , T. , and Wong , V.W. Modeling the lubrication, dynamics, and effects of piston dynamic tilt of twin-land oil control rings in internal combustion engines J. Eng. Gas Turbines Power 122 1 119 129 2000
  11. Tian , T. Dynamic behaviours of piston rings and their practical impact. Part 1: ring flutter and ring collapse and their effects on gas flow and oil transport Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 216 4 209– 228 2002
  12. Tian , T. Dynamic behaviours of piston rings and their practical impact. Part 2: oil transport, friction and wear of ring/liner interface and the effects of piston and ring dynamics Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 216 4 229– 248 2002
  13. Thirouard , B. , Tian , T. , and Hart , D.P. Investigation of Oil Transport Mechanisms in the Piston Ring Pack of a Single Cylinder Diesel Engine, Using Two Dimensional Laser Induced Fluorescence SAE Technical Paper 982658 1998 https://doi.org/10.4271/982685
  14. Thirouard , B. , and Tian , T. Oil Transport in the Piston Ring Pack (Part I): Identification and Characterization of the Main Oil Transport Routes and Mechanisms SAE Technical Paper 2003-01-1952 2003 https://doi.org/10.4271/2003-01-1952
  15. Thirouard , B. , and Tian , T. Oil Transport in the Piston Ring Pack (Part II): Zone Analysis and Macro Oil Transport Model SAE Technical Paper 2003-01-1953 2003 https://doi.org/10.4271/2003-01-1953
  16. Yilmaz , E. Sources and Characteristics of Oil Consumption in a Spark-Ignition Engine Massachusetts Institute of Technology 2003
  17. Baelden , C. , and Tian , T. A Dual Grid Curved Beam Finite Element Model of Piston Rings for Improved Contact Capabilities SAE Int. J. Engines 7 1 156 171 2014 https://doi.org/10.4271/2014-01-1085
  18. Liu , Y. , Li , Y. , and Tian , T. Development and Application of Ring-Pack Model Integrating Global and Local Processes. Part 2: Ring-Liner Lubrication SAE Int. J. Engines 10 4 1969 1983 2017 https://doi.org/10.4271/2017-01-1047
  19. Bhouri , M.A. Curved Beam Based Model for Piston-Ring Designs in Internal Combustion Engines Massachusetts Institute of Technology 2017
  20. Wang , Yuan 2012
  21. Fang , T. Computations and Modeling of Oil Transport between Piston Lands and Liner in Internal Combustion Engines Massachusetts Institute of Technology 2014
  22. Przesmitzki , S.S.V. Characterization of Oil Transport in the Power Cylinder of Internal Combustion Engines during Steady State and Transient Operation Massachusetts Institute of Technology 2008
  23. Felter , C.L. 2007
  24. Shahmohamadi , H. , Rahmani , R. , Rahnejat , H. , King , P. , and Garner , C. Cavitating flow in engine piston ring-cylinder liner conjunction ASME 2013 International Mechanical Engineering Congress and Exposition American Society of Mechanical Engineers Digital Collection 2013
  25. Shahmohamadi , H. , Mohammadpour , M. , Rahmani , R. , Rahnejat , H. et al. On the boundary conditions in multi-phase flow through the piston ring-cylinder liner conjunction Tribol. Int. 90 164 174 2015
  26. Hronza , J. , and Bell , D. A Lubrication and Oil Transport Model for Piston Rings Using a Navier-Stokes Equation with Surface Tension SAE Technical Paper 2007-01-1053 2007 https://doi.org/10.4271/2007-01-1053
  27. Puthiya Veettil , M. , and Shi , F. CFD Analysis of Oil/Gas Flow in Piston Ring-Pack SAE Technical Paper 2011-01-1406 2011 https://doi.org/10.4271/2011-01-1406
  28. Oliva , A. , Held , S. , Herdt , A. , and Wachtmeister , G. Numerical Simulation of the Gas Flow Through the Piston Ring Pack of an Internal Combustion Engine SAE Technical Paper 2015-01-1302 2015 https://doi.org/10.4271/2015-01-1302
  29. Oliva , A. , and Held , S. Numerical multiphase simulation and validation of the flow in the piston ring pack of an internal combustion engine Tribol. Int. 101 98 109 2016
  30. Lyubarskyy , P. , and Bartel , D. 2D CFD-model of the piston assembly in a diesel engine for the analysis of piston ring dynamics, mass transport and friction Tribol. Int. 104 September 352 368 2016 10.1016/j.triboint.2016.09.017
  31. Urzua , Dr.P. , Lehnen , A. , Otte , R. , Prouvier , M. , V.A.P.D.T , A.W. , Tian , Q. , Zhang , Y.L.-M. , Detailed Fuel and Oil Transport Simulation for Understanding Low Speed Pre-Ignition - LSPI 13th International AVL Symposium on Propulsion Diagnostics Kurhaus, Baden-Baden, Germany 2018
  32. MID MICHIGAN Res. 2020
  33. Brombolich , L.J. Compu-Tec Eng. Intern. Report, St. Louis, MO 1993
  34. Ejakov , M.A. , Schock , H.J. , Brombolich , L.J. , Carlstrom , C.M. , and Williams , R.L. 1997
  35. Ejakov , M.A. , Hascher , H.G. , Schock , H.J. , Brombolich , L.J. et al. Simulation Analysis of Ring Pack Behavior in a Deactivated Cylinder New York, NY (United States) American Society of Mechanical Engineers 1996
  36. Ejakov , M.A. , Schock , H.J. , and Brombolich , L.J. Modeling of Ring Twist for an IC Engine SAE Technical Paper 982693 1998 https://doi.org/10.4271/982693
  37. Chui , B.-K. , Schock , H.J. , Fedewa , A.M. , Richardson , D.E. , and Shaw , T. Coupled Model of Partially Flooded Lubrication and Oil Vaporization in an Internal Combustion Engine ASME 2005 Internal Combustion Engine Division Spring Technical Conference American Society of Mechanical Engineers Digital Collection 447 456 2005
  38. Chui , B.-K. and Schock , H.J. Computational Analysis of Piston-Ring Wear and Oil Consumption for An Internal Combustion Engine ASME 2002 Internal Combustion Engine Division Fall Technical Conference American Society of Mechanical Engineers Digital Collection 461 469 2002
  39. Panayi , A. , Schock , H. , Chui , B.-K. , and Ejakov , M. Parameterization and FEA Approach for the Assessment of Piston Characteristics SAE Technical Paper 2006-01-0429 2006 https://doi.org/10.4271/2006-01-0429
  40. Cheng , C. , Kharazmi , A. , Schock , H. , Wineland , R. , and Brombolich , L. Three-dimensional piston ring-cylinder bore contact modeling J. Eng. Gas Turbines Power 137 11 2015
  41. Kharazmi , A. Three Dimensional Analysis of the Gas Flow in Piston Ring Pack Michigan State University 2017
  42. Reynolds , O. IV. On the theory of lubrication and its application to Mr. Beauchamp tower’s experiments, including an experimental determination of the viscosity of olive oil Philos. Trans. R. Soc. London 177 157– 234 1886
  43. Patir , N. and Cheng , H.S. 1978
  44. Greenwood , J.A. , and Tripp , J.H. The contact of two nominally flat rough surfaces Proc. Inst. Mech. Eng. 185 1 625 633 1970
  45. Archard , J.F. Contact and rubbing of flat surfaces J. Appl. Phys. 24 8 981 988 1953 10.1063/1.1721448
  46. Antoine , C. Vapor Pressure: a new relationship between pressure and temperature Comptes Rendus Des Séances l’Académie Des Sci. (in French) 1888
  47. CONVERGE , C.F.D. , WI, 2013
  48. Manninen , M. , Taivassalo , V. , and Kallio , S. 1996
  49. Hirt , C.W. , and Nichols , B.D. Volume of fluid (VOF) method for the dynamics of free boundaries J. Comput. Phys. 39 1 201 225 1981
  50. Convergent Science 2017
  51. Waclawczyk , T. , and Koronowicz , T. Modeling of the wave breaking with CICSAM and HRIC high resolution schemes Eur. Conf. Comput. Fluid Dyn. 1 19 2006
  52. Fefferman , C.L. Existence and smoothness of the Navier-Stokes equation Millenn. Prize Probl. 57 67 2006
  53. Launder , B.E. , and Sharma , B.I. Application of the energy-dissipation model of turbulence to the calculation of flow near a spinning disc Lett. Heat Mass Transf. 1 2 131 137 1974
  54. Redlich , O. , and Kwong , J.N.S. On the thermodynamics of solutions. V. An equation of state. Fugacities of gaseous solutions Chem. Rev. 44 1 233 244 1949
  55. Issa , R.I. Solution of the implicitly discretised fluid flow equations by operator-splitting J. Comput. Phys. 62 1 40 65 1986
  56. Courant , R. , Friedrichs , K. , and Lewy , H. On the partial difference equations of mathematical physics IBM J. Res. Dev. 11 2 215 234 1967
  57. Yilmaz , E. , Tian , T. , Wong , V.W. , and Heywood , J.B. The Contribution of Different Oil Consumption Sources to Total Oil Consumption in a Spark Ignition Engine SAE Technical Paper 2004-01-2909 2004 https://doi.org/10.4271/2004-01-2909
  58. Bilicki , Z. , and Kestin , J. Physical aspects of the relaxation model in two-phase flow Proc. R. Soc. London. A. Math. Phys. Sci. 428 1875 379 397 1990
  59. Downar-Zapolski , P. , Bilicki , Z. , Bolle , L. , and Franco , F. The Non-Equilibrium Relaxation Model for One-Dimensional Flashing Liquid Flow 3rd ASME JSME Joint Fluids Engineering Conference 616 1999
  60. Launder , B.E. , and Spalding , D.B. The numerical computation of turbulent flows Numerical Prediction of Flow, Heat Transfer, Turbulence and Combustion Elsevier 1983 96 116
  61. Amsden , A.A. , and Findley , M. KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves Livermore, CA (United States Lawrence Livermore National Lab.(LLNL) 1997
  62. Dursunkaya , Z. , Keribar , R. , and Richardson , D.E. Experimental and Numerical Investigation of Inter-ring Gas Pressures and Blowby in a Diesel Engine SAE Technical Paper 930792 1993 https://doi.org/10.4271/930792
  63. Tian , T. , Noordzij , L.B. , Wong , V.W. , and Heywood , J.B. Modeling piston-ring dynamics, blowby, and ring-twist effects J. Eng. Gas Turbines Power 120 1998
  64. Thirouard , B. Characterization and Modeling of the Fundamental Aspects of Oil Transport in the Piston Ring Pack of Internal Combustion Engines Massachusetts Institute of Technology 2001
  65. Tamai , G. 1995
  66. Noordzij , L.B. 1996
  67. De Petris , C. , Giglio , V. , and Police , G. A Mathematical Model of the Evaporation of the Oil Film Deposed on the Cylinder Surface of IC Engines SAE Technical Paper 972920 1997 https://doi.org/10.4271/972920
  68. Inagaki , H. , Saito , A. , Murakami , M. , and Konomi , T. Development of Two-dimensional Oil Film Thickness Distribution Measuring System SAE Technical Paper 952346 1995 https://doi.org/10.4271/952346
  69. Nakashima , K. , Ishihara , S. , and Urano , K. Influence of Piston Ring Gaps on Lubricating Oil Flow into the Combustion Chamber SAE Technical Paper 952546 1995 https://doi.org/10.4271/952546
  70. Saito , K. , Igashira , T. , and Nakada , M. Analysis of Oil Consumption by Observing Oil Behavior around Piston Ring Using a Glass Cylinder Engine SAE Technical Paper 892107 1989 https://doi.org/10.4271/892107
  71. Furuhama , S. , Hiruma , M. , and Yoshida , H. An Increase of Engine Oil Consumption at High Temperature of Piston and Cylinder SAE Technical Paper 810976 1981 https://doi.org/10.4271/810976
  72. Orrin , D.S. , and Coles , B.W. Effects of Engine Oil Composition on Oil Consumption SAE Technical Paper 710141 1971 https://doi.org/10.4271/710141
  73. Stewart , R.M. and Selby , T.W. The relationship between oil viscosity and engine performance-a literature search The Relationship Between Engine Oil Viscosity and Engine Performance ASTM International 1977
  74. Wahiduzzaman , S. , Keribar , R. , Dursunkaya , Z. , and Kelley , F.A. A Model for Evaporative Consumption of Lubricating Oil in Reciprocating Engines SAE Technical Paper 922202 1992 https://doi.org/10.4271/922202
  75. Audette , W.E. III , and Wong , V.W. A Model for Estimating Oil Vaporization from the Cylinder Liner as a Contributing Mechanism to Engine Oil Consumption SAE Technical Paper 1999-01-1520 1999 https://doi.org/10.4271/1999-01-1520
  76. Zhang , Q. , Tian , T. , and Koeser , P. A One-Line Correlation for Predicting Oil Vaporization from Liner for IC Engines SAE Technical Paper 2018-01-0162 2018 https://doi.org/10.4271/10.4271/2018-01-0162

Cited By

Recommended Content

Technical Paper Lubrication Investigation of a Non-Straight Internal Combustion Hydrodynamic Bearing
Technical Paper In-Cylinder Gas Velocity Measurements Comparing Crankcase and Blower Scavenging in a Fired Two-Stroke Cycle Engine
Technical Paper A New High-Performance Four-Stroke Engine for All-Position Use in Hand-Held Power Tools