This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Influence of Distributing Channel Configuration and Geometric Parameters on Flow Uniformity in Straight Flow-Field of PEM Fuel Cell
Technical Paper
2020-01-1173
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Gas distribution of proton exchange membrane fuel cells (PEMFCs) is mainly decided by flow field of bipolar plate. The improper design of distributing channel, nonuniform gas flow distribution and current density distribution among different straight channels are the leading factors that could tremendously undermine the performance and life expectancy of the cell. However, there is lack of research focusing on distributing channel in straight-parallel flow field. In this work, a three-dimensional numerical model of PEMFC cathode flow field is developed with CFD method to investigate the effects of configuration type and width of the distributing channel on pressure distribution in distributing channel and on reactant flow distribution, pressure drop and concentration distribution in multiple straight channel. Effects of electrochemical reaction and formation of water on the flow distribution are taken into consideration. By extending one group of z-type channels to four groups, a new flow field for a full cell is designed. Numerical results indicate that different type and width of distributing channel do affect the flow, pressure drop and gas concentration uniformity. The pressure drop and the distributed flow in every straight channel have the same variation tendencies, and those of straight channels near the general outlet are higher than those of straight channels near the general inlet. Furthermore, Z-type configuration has a better pressure drop uniformity and flow uniformity than the U-type. As the width of Z-type distributing channel increases from 0.8mm to 1.8mm, the difference between the max and min flow of straight channels decreases by 29%, and the concentration difference descends as well. This analysis informs that the optimization design of the geometric parameters of distributing channel, such as adopting Z-type distributing channel and increasing its width, can effectively improve the gas distribution uniformity in PEMFC.
Recommended Content
Authors
Citation
Wei, H., Chang, G., Liu, J., and Xu, S., "Influence of Distributing Channel Configuration and Geometric Parameters on Flow Uniformity in Straight Flow-Field of PEM Fuel Cell," SAE Technical Paper 2020-01-1173, 2020, https://doi.org/10.4271/2020-01-1173.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Kim , K.N. , Jeon , D.H. , Nam , J.H. , and Kim , B.M. Numerical Study of Straight-Parallel PEM Fuel Cells at Automotive Operation International Journal of Hydrogen Energy 37 11 9212 9227 2012
- Su , A. , Chiu , Y.C. , and Weng , F.B. The Impact of Flow Field Pattern on Concentration and Performance in PEMFC International Journal of Energy Research 29 5 409 425 2010 10.1002/er.1059
- Kee , R.J. , Pavan , K. , Kevin , W. , and Mark , P. A Generalized Model of the Flow Distribution in Channel Networks of Planar Fuel Cells Journal of Power Sources 109 1 148 159 2002
- Maharudrayya , S. , Jayanti , S. , and Deshpande , A.P. Flow Distribution and Pressure Drop in Parallel-Channel Configurations of Planar Fuel Cells Journal of Power Sources 144 1 94 106 2005
- Maharudrayya , S. , Jayanti , S. , and Deshpande , A.P. Pressure Drop and Flow Distribution in Multiple Parallel-Channel Configurations Used in Proton-Exchange Membrane Fuel Cell Stacks Journal of Power Sources 157 1 358 367 2006
- Wang , J. and Wang , H. Flow-Field Designs of Bipolar Plates in PEM Fuel Cells: Theory and Applications Fuel Cells 12 6 989 1003 2012
- Martín , I.G. and José , F.H. Simulation and Study of Proposed Modifications over Straight-Parallel Flow Field Design International Journal of Hydrogen Energy 39 16 8861 8867 2014
- Alrwashdeh , S.S. , Manke , I. , Markötter , H. , Haußmann , J. et al. Neutron Radiographic in Operando Investigation of Water Transport in Polymer Electrolyte Membrane Fuel Cells with Channel Barriers Energy Conversion and Management 148 604 610 2017
- Lim , B.H. , Majlan , E.H. , Daud , W.R.W. , Rosli , M.I. et al. Numerical Analysis of Modified Parallel Flow Field Designs for Fuel Cells International Journal of Hydrogen Energy 42 14 9210 9218 2017
- Haichao , L. , Weimin , Y. , Jing , T. , Ying , A. et al. Numerical Analysis of Parallel Flow Fields Improved by Micro-Distributor in Proton Exchange Membrane Fuel Cells Energy Conversion and Management 176 99 109 2018 10.1016/j.enconman.2018.09.024
- Ashrafi , M. , Kanani , H. , and Shams , M. Numerical and Experimental Study of Two-Phase Flow Uniformity in Channels of Parallel PEM Fuel Cells with Modified Z-Type Flow-Fields Energy 147 317 328 2018
- Mahmoudimehr , J. and Daryadel , A. Influences of Feeding Conditions and Objective Function on the Optimal Design of Gas Flow Channel of a PEM Fuel Cell International Journal of Hydrogen Energy 42 36 23141 23159 2017
- Xu , P. and Xu , S.C. Three-Dimensional Modeling of Gas Purge in a Polymer Electrolyte Membrane Fuel Cell with Co-Flow and Counter-Flow Pattern Fuel Cells 17 6 794 808 2017
- Jiang , F.M. and Wang , C.Y. Numerical Modeling of Liquid Water Motion in a Polymer Electrolyte Fuel Cell International Journal of Hydrogen Energy 39 2 942 950 2014
- Meng , H. A Three-Dimensional Mixed-Domain Pem Fuel Cell Model with Fully-Coupled Transport Phenomena Journal of Power Sources 164 2 688 696 2007
- Zhang , G.B. , Xie , B. , Bao , Z.M. , Niu , Z.Q. et al. Multi-Phase Simulation of Proton Exchange Membrane Fuel Cell with 3d Fine Mesh Flow Field International Journal of Energy Research 42 15 4697 4709 2018