Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Optimization of an Asymmetric Twin Scroll Volute Turbine under Pulsating Engine Boundary Conditions

Journal Article
2020-01-0914
ISSN: 2641-9645, e-ISSN: 2641-9645
DOI: https://doi.org/10.4271/2020-01-0914
Published April 14, 2020 by SAE International in United States
Optimization of an Asymmetric Twin Scroll Volute Turbine under Pulsating Engine Boundary Conditions
Sector:
Citation: Palenschat, T., Wahl, P., Nakov, G., Hoffmann, K. et al., "Optimization of an Asymmetric Twin Scroll Volute Turbine under Pulsating Engine Boundary Conditions," SAE Int. J. Adv. & Curr. Prac. in Mobility 2(5):2730-2744, 2020, https://doi.org/10.4271/2020-01-0914.
Language: English

References

  1. International Transport Forum 2018
  2. International Transport Forum 2015
  3. McKinsey&Company 2018
  4. European Automobile Manufacturers Association 2017
  5. Li , Z. and Zheng , X. Review of Design Optimization Methods for Turbomachinery Aerodynamics Progress in Aerospace Sciences 93 1 23 2017
  6. Bonaiuti , D. and Zangeneh , M. On the Coupling of Inverse Design and Optimization Techniques for the Multiobjective, Multipoint Design of Turbomachinery Blades Journal of Turbomachinery 131 2 16 2009
  7. Zangeneh , M. A Compressible Three-Dimensional Design Method for Radial and Mixed Flow Turbomachinery Blades Int. J. Numer. Methods Fluids 1991
  8. Zangeneh , M. On 3D Inverse Design of Centrifugal Compressor Impellers with Splitter Blades ASME International Gas Turbine and Aeroengine Congress and Exhibition Stockholm 1998
  9. Zangeneh , M. , Schleer , M. , Ploger , F. , Hong , S.S. et al. Investigation of an Inversely Designed Centrifugal Compressor Stage-Part I: Design and Numerical Verification Journal of Turbomachinery 126 1 2004
  10. Zhang , J. , Zangeneh , M. , and Eynon , P. A 3D Inverse Design Based Multidisciplinary Optimization on the Radial and Mixed-Inflow Turbines for Turbochargers 11th International Conference on Turbochargers and Turbocharging London 2014 399 410
  11. Zhang , J. and Zangeneh , M. Increasing Pulse Energy Recovery of Radial Turbocharger Proceedings of ASME Turbo Expo Montreal 2015
  12. Zhang , J. 2017
  13. Amirante , R. , Catalano , L.A. , Dadone , A. , and Daloiso , V.S.E. Design Optimization of the Intake of a Small-Scale Turbojet Engine Tech Science Press CMES 18 1 17 30 2007
  14. Burguburu , S. , Toussaint , C. , Bonhomme , C. , and Leroy , G. Numerical Optimization of Turbomachinery Bladings Journal of Turbomachinery 126 1 91 100 2004
  15. Jarrett , J.P. , Dawes , W.N. , and Clarkson , P.J. An Approach to Integrated Multi-Disciplinary Turbomachinery Design Journal of Turbomachinery 129 3 488 494 2007
  16. Kipouros , T. , Jaeggi , D.M. , Dawes , W.N. , Parks , G.T. et al. Biobjective Design Optimization for Axial Compressors Using Tabu Search AIAA Journal 46 3 701 711 2008
  17. Shahpar , S. A Review of Automatic Optimisation Applications in Aerodynamic Design of Turbomachinery Components Design Optimization International Conference Athens 2004
  18. Verstraete , T. , Müller , L. , and Müller , J.-D. CAD-Based Adjoint Optimization of the Stresses in a Radial Turbine Proceedings of ASME Turbo Expo Charlotte 2017
  19. Derakhshan , S. , Pourmahdavi , M. , Abdolahnejad , E. , Reihani , A. , and Ojaghi , A. Numerical Shape Optimization of a Centrifugal Pump Impeller Using Artificial Bee Colony Algorithm Computers and Fluids 81 145 151 2013
  20. Heinrich , M. and Schwarze , R. Genetic Algorithm Optimization of the Volute Shape of a Centrifugal Compressor International Journal of Rotating Machinery 2016
  21. Ibaraki , S. , Van den Braembussche , R.A. , Verstraete , T. , Alsalihi , Z. , Sugimoto , K. , and Tomita , I. Aerodynamic Design Optimization of a Centrifugal Compressor Impeller Based on an Artificial Neural Network and Genetic Algorithm 11th International Conference on Turbochargers and Turbocharging London 2014 65 77
  22. Khairuddin , U.B. , Costall , A. , and Martinez-Botas , R. Influence of Geometrical Parameters on Aerodynamic Optimization of a Mixed-Flow Turbocharger Turbine Proceedings of ASME Turbo Expo Montreal 2015
  23. Khairuddin , U.B. and Costall , A. Aerodynamic Optimization of the High Pressure Turbine and Interstage Duct in a Two-Stage Air System for a Heavy-Duty Diesel Engine Proceedings of ASME Turbo Expo Charlotte 2017
  24. Müller , L. , Alsalihi , Z. , and Verstraete , T. Multidisciplinary Optimization of a Turbocharger Radial Turbine Journal of Turbomachinery 135 2 2013
  25. Pierret , S. and Van den Braembussche , R.A. Turbomachinery Blade Design Using a Navier-Stokes Solver and Artificial Neural Network Journal of Turbomachinery 121 2 326 1999
  26. Roclawski , H. , Bohle , M. , and Gugau , M. Multidisciplinary Design Optimization of a Mixed Flow Turbine Wheel Proceedings of ASME Turbo Expo Copenhagen 2012
  27. Shahpar , S. and Caloni , S. Aerodynamic Optimisation of High Pressure Turbines for Lean-Burn Combustion System Journal of Engineering for Gas Turbines and Power 135 055001 2013
  28. Verstraete , T. , Alsalihi , Z. , and Van den Braembussche , R.A. Multidisciplinary Optimization of a Radial Compressor for Microgas Turbine Applications Journal of Turbomachinery 132 3 2010
  29. Wöhr , M. , Müller , M. , and Leweux , J. Variable Geometry Compressors for Heavy Duty Truck Engine Turbochargers Journal of Engineering for Gas Turbines and Power 140 7 2018
  30. Aulich , M. , Voß , C. , and Raitor , T. Optimization Strategies Demonstrated on a Transonic Centrifugal Compressor 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery Honolulu 2014
  31. Geller , M. , Schemmann , C. , and Kluck , N. Optimization of the Operation Characteristic of a Highly Stressed Centrifugal Compressor Impeller Using Automated Optimization and Metamodeling Methods Proceedings of ASME Turbo Expo Charlotte 2017
  32. Voß , C. , Aulich , M. , and Raitor , T. Metamodel Assisted Aeromechanical Optimization of a Transonic Centrifugal Compressor 1st DLR TRACE User Conference Cologne 2014
  33. Palenschat , T. 2019
  34. Montgomery , D.C. Design and Analysis of Experiments Second Edition New York John Wiley & Sons, Inc. 5 Edition 2001
  35. Rao , S.S. Engineering Optimization: Theory and Practice New York John Wiley & Sons, Inc. 2009
  36. Schröder , C. 2017
  37. Wöhr , M. , Schneid , M. , Palenschat , T. , Dillmann , A. , Müller , M. , and Harsha , V. Automated Turbocharger Compressor Development at Daimler Trucks 13th International Conference on Turbochargers and Turbocharging London 2018
  38. Mitchell , M. An Introduction to Genetic Algorithms 32 Cambridge MIT Press 1996
  39. Press , W.H. , Teukolsky , S. , Vetterling , W.T. , and Flannery , B.P. Numerical Recipes 3rd Edition: The Art of Scientific Computing New York Cambridge University Press 2007
  40. Nelder , J.A. and Mead , R. A Simplex Method for Function Minimization The Computer Journal 7 4 308 313 1965
  41. Palenschat , T. , Cortell , J.F. , Newton , P. , Martinez-Botas , R. , Müller , M. , and Rajoo , S. Numerical Study of the Quasi-Steady Approach Applied to an Asymmetric Twin-Scroll Volute Turbocharger Turbine for a Heavy Duty Diesel Engine Under Realistic Boundary Conditions 13th International Conference on Turbochargers and Turbocharging London 2018
  42. Palenschat , T. , Newton , P. , Martinez-Botas , R. , Müller , M. , and Leweux , J. 3-D Computational loss Analysis of an Asymmetric Volute Twin-Scroll Turbocharger Proceedings of ASME Turbo Expo Charlotte 2017

Cited By

Recommended Content

Technical Paper EBDI® - Application of a Fully Flexible High BMEP Downsized Spark Ignited Engine
Technical Paper Future Prospects for Supercharging
Technical Paper Optimization of Diesel Engine Operating Parameters Using Neural Networks