This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Combustion System Development in GAC Turbocharged Miller GDI Engine with 0.5L/Cylinder
Technical Paper
2020-01-0838
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
GAC Group has set up two modular engine families, G and GS, for various vehicle classes equipping demands. G family engines, which have already gone through three generations, target for the higher torque and power, the lower fuel consumption and the future strict emission standards. For the latest generation, new technologies were added to achieve the development goals based on the previous modular engines. For example, miller combustion cycle with increased compression ratio is introduced in the newer engine combustion system. Additional key technologies such as 350 bar injection system and high tumble intake ports are also applied.
The combustion system development, which established on the GAC Combustion Controlling System (GCCS), was facilitated by integrated use of advanced optical measurements and computational fluid dynamics for improving the in-cylinder flow, fuel sprays and the interaction between them. This paper presents the analytical work done to develop the combustion systems. A higher tumble intake port design enhances the motion in intake process, the well-organized in-cylinder flow may bend over the sprays and keep them from interacting with the cylinder. The redesigned spray structure and piston bowl could do good for a reasonable mixture formation, which decreases the soot and HC emissions, especially for the cold-start conditions. Results from engine test bench experiments show that all of the new generation of the 0.5L/cylinder turbocharged DI gasoline engines can meet the strict legislation for nearest or some considerable time to come.
Authors
- Yuhuai Li - GAC Automotive R&D Center
- Hong Chen - GAC Automotive R&D Center
- Jiakun Du - GAC Automotive R&D Center
- Jian Wu - GAC Automotive R&D Center
- Wenfeng Zhan - GAC Automotive R&D Center
- Guangquan Wu - GAC Automotive R&D Center
- Sicong Lin - GAC Automotive R&D Center
- Fake Shao - GAC Automotive R&D Center
Topic
Citation
Li, Y., Chen, H., Du, J., Wu, J. et al., "Combustion System Development in GAC Turbocharged Miller GDI Engine with 0.5L/Cylinder," SAE Technical Paper 2020-01-0838, 2020, https://doi.org/10.4271/2020-01-0838.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 |
Also In
References
- Kratzsch , M. , Kratzsch , M. , Günther , T. et al. Powertrain 2025 - 75 g CO2/Km One Base Engine for the Entire Fleet? 26th Aachen Colloquium 2017
- Landsberg , D. , Zink , U. , Müller-Stach , T. et al. Investigations on Exhaust Aftertreatment Systems for Euro 6d with Specific Focus on RDE Driving Scenarios 27th Aachen Colloquium 2018
- Kleeberg , H. , Tomazic , D. , Lang , O. , and Habermann , K. Future Potential and Development Methods for High Output Turbocharged Direct Injected Gasoline Engines SAE Technical Paper 2006-01-0046 2006 https://doi.org/10.4271/2006-01-0046
- Görgen , M. , Nijs , M. , Lehn , H. et al. Current and Future Trends of Gasoline Particulate Filter Technologies, Calibration Strategies and Aging Methods 26th Aachen Colloquium 2017
- Cavina , N. , Businaro , A. , Moro , D. , Di Gioia , R. et al. Assessment of the Influence of GDI Injection System Parameters on Soot Emission and Combustion Stability through a Numerical and Experimental Approach SAE Int. J. Engines 8 5 2078 2088 2015 https://doi.org/10.4271/2015-24-2422