This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Tracking Panel Movement during Stamping Process Using Advanced Optical Technology
Technical Paper
2020-01-0541
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Metal panels are comprehensively applied in the automotive industry. A significant issue with metal panels is the deflection when moving in the press line of the stamping process. Unpredictable deflection could result in the cut off of the press line. To control the deflection in a safe zone, finite element tools are used to simulate the panel transform process. However, the simulation requires experimental validation where conventional displacement measurement techniques could not satisfy the requirement of vast filed displacement and accuracy point tracking. In this study, multi-camera digital image correlation (DIC) systems have been developed to track the movement of panels during the press line of the stamping process. There are some advantages of applying the DIC system, including non-contact, full-field, high accuracy, and direct measurement techniques that provide the evaluation displacement of the metal panel and press line. Nevertheless, the traditional stereo DIC system (with two cameras) has a limited field of vision, and the multi-camera DIC system expands the field of vision and enables the measurement of panel deflection during the stamping process. Six cameras were applied parallelly at same plane in proper to record the entire transformation process of the metal panel from rises up until drop off. Every two cameras constitute a stereo DIC system, and six cameras build three pairs. Two adjacent pairs have an overlapping zone so that the data measured can be stitched together. In this paper, we will describe the proper methodology to measure panel movement and to separate the panel vibration from the panel movement
Authors
Topic
Citation
Guo, B., Zheng, X., Zhang, B., Wang, R. et al., "Tracking Panel Movement during Stamping Process Using Advanced Optical Technology," SAE Technical Paper 2020-01-0541, 2020, https://doi.org/10.4271/2020-01-0541.Also In
References
- Kren , L. Press Line Addresses Setup-Time Reduction Start to Finish Metal Forming 47 1 January 2013
- Chen , F. , Xu , C. , Xin , X. , Xiu , F. , and Lianxiang , Y. Full-field 3D Measurement Using Multi-Camera Digital Image Correlation System Optics and Lasers in Engineering 51 9, 2013 1044 1052
- Xu , C. , Yang , L. , Xu , N. , Xie , X. et al. Cluster Approach Based Multi-Camera Digital Image Correlation: Methodology and Its Application in Large Area High Temperature Measurement Optics & Laser Technology 57 318 326 2014
- Li , J. , Xie , X. , Yang , G. , Zhang , B. et al. Whole-Field Thickness Strain Measurement Using Multiple Camera Digital Image Correlation System Optics and Lasers in Engineering 90 19 25 2017
- Li , J. , Zhang , B. , Kang , X. , Xu , W. et al. Single Camera 3d Digital Image Correlation Using a Polarized System Instruments and Experimental Techniques 61 1 99 105 2018
- Li , J. , Dan , X. , Xu , W. , Wang , Y. et al. 3d Digital Image Correlation Using Single Color Camera Pseudo-Stereo System Optics & Laser Technology 95 1 7 2017
- Xu , W. , Feng , X. , Li , J. , Shi , X. , and Bai , T. Strain Analysis Of Pressure Vessels Contained Pits Based on Digital Image Correlation Method Seventh International Symposium on Precision Mechanical Measurements 9903 990310 2016
- Merklein , M. , Kuppert , A. , and Geiger , M. Time Dependent Determination of Forming Limit Diagrams CIRP Annals-Manufacturing Technology 59 1 295 298 2010
- Sutton , M.A. , Orteu , J. and Schreier , H.W. 2009 Image Correlation for Shape, Motion and Deformation Measurement Springer Science+Business Media LLC
- Xu , C. , Xu , N. , Xie , X. , Smith , L. , and Yang , L. Forming Limit Measurement Using a Multi-Sensor Digital Image Correlation System SAE Technical Paper 2013-01-1423 2013 https://doi.org/10.4271/2013-01-1423
- Dantec Dynamics Digital Image Correlation Group
- Orteu , J.J. , Bugarin , F. , Harvent , J. , Robert , L. , and Velay , V. Multiple-Camera Instrumentation of a Single Point Incremental Forming Process Pilot for Shape and 3D Displacement Measurements: Methodology and Results Experimental Mechanics 51 625 639 2011
- Li , J. , Dan , X. , Xu , W. , Wang , Y. et al. 3D Digital Image Correlation Using Single Color Camera Pseudo-Stereo System Optics & Laser Technology 95 1 7 2017