This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Different Geometrical Changes in the Intake Manifold of a DI Diesel Engine Fueled with Biodiesel-Diesel Blends
Technical Paper
2020-01-0346
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
One of the major challenges of biodiesel run diesel engines is poor mixture formation. This problem can be overcome by inducing the turbulence into the engine cylinder, thereby a proper mixing of air-fuel occurs. In this study, an attempt was made to assess the engine behavior in terms of its combustion, performance and emission characteristics by replacing the normal intake manifold with the internally buttress threaded manifold, which is designated as IBTM throughout the manuscript. This investigation was further carried out to run the engine with suitable blends such as WCOME10 (10% of WCOME + 90% diesel) and WCOME20 (20% of WCOME + 80% diesel). Based on the results obtained in this study, IBTM exhibits a higher BTE of about by 2.8% for WCOME20-b than that of diesel operation (at normal intake). At the same time, the carbon monoxide (CO), hydrocarbon (HC) and smoke emissions were decreased by about 1%, 30.3%, and 20.4% respectively, whereas, NOx emissions were increased by about 21.9% for IBTM run on same blend (WCOME20-b) on compared to the normal intake manifold when fueled with diesel. Similarly, for WCOME20-b, the delay period decreased by 3°CA than that of diesel operation. At all the cases of this study, by inducing the turbulence (or) with IBTM, an increase in HRR was noticed, which showed an improvement in the amount of work developed.
Recommended Content
Authors
Topic
Citation
Reddy, N., Khayum, N., and Uppara, D., "Effect of Different Geometrical Changes in the Intake Manifold of a DI Diesel Engine Fueled with Biodiesel-Diesel Blends," SAE Technical Paper 2020-01-0346, 2020, https://doi.org/10.4271/2020-01-0346.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 | ||
| Unnamed Dataset 5 |
Also In
References
- Nema , P. , Nema , S. , and Roy , P. An Overview of Global Climate Changing in Current Scenario and Mitigation Action Renewable and Sustainable Energy Reviews 16 4 2329 2336 May 1, 2012
- Sharma , A. and Murugan , S. Durability Analysis of a Single Cylinder DI Diesel Engine Operating with a Non-Petroleum Fuel Fuel 191 393 402 Mar 1, 2017
- Pradhan , D. , Bendu , H. , Singh , R.K. , and Murugan , S. Mahua Seed Pyrolysis Oil Blends as an Alternative Fuel for Light-Duty Diesel Engines Energy 118 600 612 Jan 1, 2017
- Khayum , N. , Anbarasu , S. , and Murugan , S. Biogas Potential from Spent Tea Waste: A Laboratory Scale Investigation of Co-Digestion with Cow Manure Energy 165 760 768 Dec 15, 2018
- Abed , K.A. , El Morsi , A.K. , Sayed , M.M. , El Shaib , A.A. , and Gad , M.S. Effect of Waste Cooking-Oil Biodiesel on Performance and Exhaust Emissions of a Diesel Engine Egyptian Journal of Petroleum 27 4 985 989 Dec 1, 2018
- Wei , L. , Cheng , R. , Mao , H. , Geng , P. et al. Combustion Process and NOx Emissions of a Marine Auxiliary Diesel Engine Fuelled with Waste Cooking Oil Biodiesel Blends Energy 144 73 80 Feb 1, 2018
- Gad , M.S. , El-Araby , R. , Abed , K.A. , El-Ibiari , N.N. et al. Performance and Emissions Characteristics of CI Engine Fueled with Palm Oil/Palm Oil Methyl Ester Blended with Diesel Fuel Egyptian Journal of Petroleum 27 2 215 219 Jun 1, 2018
- Al-Dawody , M.F. , Jazie , A.A. , and Abbas , H.A. Experimental and Simulation Study for the Effect of Waste Cooking Oil Methyl Ester Blended with Diesel Fuel on the Performance and Emissions of Diesel Engine Alexandria Engineering Journal Jan 7, 2019
- Patel , C. , Chandra , K. , Hwang , J. , Agarwal , R.A. et al. Comparative Compression Ignition Engine Performance, Combustion, and Emission Characteristics, and Trace Metals in Particulates from Waste Cooking Oil, Jatropha and Karanja Oil Derived Biodiesels Fuel 236 1366 1376 Jan 15, 2019
- Prabu , S.S. , Asokan , M.A. , Roy , R. , Francis , S. , and Sreelekh , M.K. Performance, Combustion and Emission Characteristics of Diesel Engine Fuelled with Waste Cooking Oil Bio-Diesel/Diesel Blends with Additives Energy 122 638 648 Mar 1, 2017
- Yilmaz , N. , Atmanli , A. , and Trujillo , M. Influence of 1-Pentanol Additive on the Performance of a Diesel Engine Fueled with Waste Oil Methyl Ester and Diesel Fuel Fuel 207 461 469 Nov 1, 2017
- Wei , L. , Cheung , C.S. , and Ning , Z. Influence of Waste Cooking Oil Biodiesel on Combustion, Unregulated Gaseous Emissions and Particulate Emissions of a Direct-Injection Diesel Engine Energy 127 175 185 May 15, 2017
- Chiatti , G. , Chiavola , O. , and Palmieri , F. Impact of Waste Cooking Oil in Biodiesel Blends on Particle Size Distributions from a City-Car Engine Journal of the Energy Institute 91 2 262 269 Apr 1, 2018
- Khan , S. , Panua , R. , and Bose , P.K. The Impact of Combustion Chamber Configuration on Combustion and Emissions of a Single Cylinder Diesel Engine Fuelled with Soybean Methyl Ester Blends with Diesel Renewable Energy May 7, 2019
- Khayum , N. , Anbarasu , S. , and Murugan , S. Combined Effect of Fuel Injecting Timing and Nozzle Opening Pressure of a Biogas-Biodiesel Fuelled Diesel Engine Fuel 262 116505 Feb 15, 2020
- Killol , A. , Reddy , N. , Paruvada , S. , and Murugan , S. Experimental Studies of a Diesel Engine Run on Biodiesel n-Butanol Blends Renewable Energy 135 687 700 May 1, 2019
- Hirkude , J. , Belokar , V. , and Randhir , J. Effect of Compression Ratio, Injection Pressure and Injection Timing on Performance and Smoke Emissions of CI engine Fuelled with Waste Fried Oil Methyl Esters-Diesel Blend Materials Today: Proceedings 5 1 1563 1570 Jan 1, 2018
- Panneerselvam , N. , Murugesan , A. , Vijayakumar , C. , Kumaravel , A. et al. Effects of Injection Timing on Bio-Diesel Fuelled Engine Characteristics-An Overview Renewable and Sustainable Energy Reviews 50 17 31 Oct 1, 2015
- Som , S. , Ramirez , A.I. , Longman , D.E. , and Aggarwal , S.K. Effect of Nozzle Orifice Geometry on Spray, Combustion, and Emission Characteristics under Diesel Engine Conditions Fuel 90 3 1267 1276 Mar 1, 2011
- Wamankar , A.K. and Murugan , S. Combustion, Performance and Emission Characteristics of a Diesel Engine with Internal Jet Piston Using Carbon Black-Water-Diesel Emulsion Energy 91 1030 1037 Nov 1, 2015
- Niklesh Reddy , P. , Paruvada , S.K. , Killol , A. , and Murugan , G. Performance and Emission Characteristics of a Diesel Engine Fueled with Diesel and Orange Oil Blends Using Different Bowl-In Piston Geometries SAE Technical Paper 2018-01-0915 2018 https://doi.org/2018-01-0915
- Gafoor , C.A. and Gupta , R. Numerical Investigation of Piston Bowl Geometry and Swirl Ratio on Emission from Diesel Engines Energy Conversion and Management 101 541 551 Sep 1, 2015
- Premkumar , I.J. , Lingadurai , K. , and Raja , K.
- Wei , S. , Wang , F. , Leng , X. , Liu , X. , and Ji , K. Numerical Analysis on the Effect of Swirl Ratios on Swirl Chamber Combustion System of DI Diesel Engines Energy Conversion and Management 75 184 190 Nov 1, 2013
- Viswanathan , K. and Pasupathy , B. Studies on Piston Bowl Geometries Using Single Blend Ratio of Various Non-Edible Oils Environmental Science and Pollution Research 24 20 17068 17080 Jul 1,2017
- Jaichandar , S. and Annamalai , K. Influences of Re-Entrant Combustion Chamber Geometry on the Performance of Pongamia Biodiesel in a DI Diesel Engine Energy 44 1 633 640 2012
- Mahakul , B. , Sinko , K.M. , Islam , R. , Liu , C.L. , Graczyk , F.M. , Valesano , B.J. , Albright , R.K. inventors, Electro-Motive Diesel Inc, Assignee May 13, 2008
- Agarwal , A.K. , Srivastava , D.K. , Dhar , A. , Maurya , R.K. et al. Effect of Fuel Injection Timing and Pressure on Combustion, Emissions and Performance Characteristics of a Single Cylinder Diesel Engine Fuel 111 374 383 Sep 1, 2013
- Prajapati , M. and Student , M.E.
- Paul , B. and Ganesan , V. Flow Field Development in a Direct Injection Diesel Engine with Different Manifolds International Journal of Engineering, Science and Technology 2 1 80 91 2010
- Manmadhachary , A. , Kumar , M.S. , and Kumar , Y.R. Design & Manufacturing of Spiral Intake Manifold to Improve Volument Efficiency of Injection Diesel Engine by AM Process Materials Today: Proceedings 4 2 1084 1090 Jan 1, 2017
- Chinche , P.B. , Wankhede , S.K. , Bhave , A.A. , and Pande , A.
- Ashok , B. , Gopal , K.N. , Rajagopal , T.K. , Alagiasingam , S. et al. Design and Analysis of a Fuel Preheating Device for Evaluation of Ethanol Based Biofuel Blends in a Diesel Engine Application SAE Int. J. Engines 10 39 45 Jan 10, 2017 https://doi.org/10.4271/2017-26-0073
- Kumar , S. and Rosen , M.A. Cashew Nut Shell Liquid as a Fuel for Compression Ignition Engines: A Comprehensive Review Energy & Fuels May 25, 2018
- Singh , S.P. and Singh , D. Biodiesel Production through the Use of Different Sources and Characterization of Oils and Their Esters as the Substitute of Diesel: A Review Renewable and Sustainable Energy Reviews 14 1 200 216 Jan 1, 2010
- Yoon , S.H. and Lee , C.S. Experimental Investigation on the Combustion and Exhaust Emission Characteristics of Biogas-Biodiesel Dual-Fuel Combustion in a CI Engine Fuel Processing Technology 92 5 992 1000 May 1, 2011
- Barik , D. , Satapathy , A.K. , and Murugan , S. Combustion Analysis of the Diesel-Biogas Dual Fuel Direct Injection Diesel Engine-the Gas Diesel Engine International Journal of Ambient Energy 38 3 259 266 Apr 3, 2017
- Tudu , K. , Murugan , S. , and Patel , S.K. Effect of Tyre Derived Oil-Diesel Blend on the Combustion and Emissions Characteristics in a Compression Ignition Engine with Internal Jet Piston Geometry Fuel 184 89 99 Nov 15, 2016
- Wamankar , A.K. and Murugan , S. Experimental Investigation of Carbon Black-Water-Diesel Emulsion in a Stationary DI Diesel Engine Fuel Processing Technology 125 258 266 Sep 1, 2014
- Agarwal , A.K. , Srivastava , D.K. , Dhar , A. , Maurya , R.K. et al. Effect of Fuel Injection Timing and Pressure on Combustion, Emissions and Performance Characteristics of a Single Cylinder Diesel Engine Fuel 111 374 383 Sep 1, 2013
- Saravanan , N. and Nagarajan , G. Performance and Emission Studies on Port Injection of Hydrogen with Varied Flow Rates with Diesel as an Ignition Source Applied Energy 87 7 2218 2229 Jul 1, 2010
- Lahane , S. and Subramanian , K.A. Effect of Different Percentages of Biodiesel-Diesel Blends on Injection, Spray, Combustion, Performance, and Emission Characteristics of a Diesel Engine Fuel 139 537 545 Jan 1, 2015
- Khayum , N. , Rout , A. , Deepak , B.B. , Anbarasu , S. , and Murugan , S. Application of Fuzzy Regression Analysis in Predicting the Performance of the Anaerobic Reactor Co-digesting Spent Tea Waste with Cow Manure Waste and Biomass Valorization 11 1 4 Nov 2019
- Pugazhvadivu , M. and Jeyachandran , K. Investigations on the Performance and Exhaust Emissions of a Diesel Engine Using Preheated Waste Frying Oil as Fuel Renewable Energy 30 14 2189 2202 Nov 1, 2005
- Anand , R. , Kannan , G.R. , Nagarajan , S. , and Velmathi , S. Performance Emission and Combustion Characteristics of a Diesel Engine Fueled with Biodiesel Produced from Waste Cooking Oil SAE Technical Paper 2010-01-0478 2010 https://doi.org/10.4271/2010-01-0478
- Kalghatgi , G.T. , Risberg , P. , and Ångström , H.E. Partially Pre-Mixed Auto-Ignition of Gasoline to Attain Low Smoke and Low NOx at High Load in a Compression Ignition Engine and Comparison with a Diesel Fuel SAE Technical Paper 2007-01-0006 2007 https://doi.org/10.4271/2007-01-0006