This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Experimental Investigation of Silicon Carbide Nanoparticles Reinforced Magnesium Alloy (AZ91E) Metal Matrix Composite by Vacuum Stir Casting Method
Technical Paper
2019-28-0169
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
In the present investigation silicon carbide nanoparticles reinforced magnesium alloy [AZ91E] composites were prepared by vacuum stir casting process in an inert atmosphere. Required amount of silicon carbide nanoparticles with grain size of 50nm was added into AZ91E molten melt with constant stir speed of 600 rpm and vacuum pressure of 1 lpm to obtain magnesium alloy composite containing 0, 5, 7.5 and 10 wt.% SiCp nanoparticles. The prepared composites were subjected to mechanical and microstructure studies. The mechanical properties were found to increase with the addition of silicon nanoparticles compared to unreinforced magnesium alloy. The maximum impact strength, yield strength and tensile strength were found to be 29.13J, 156 MPa and 401.13 MPa respectively. Microstructure studies reveal uniform distribution of silicon carbide in magnesium alloy matrix.
Authors
Citation
Thangavel, T., Jeyaseelan, C., Paramathma, B., and Mahadevan, K., "Experimental Investigation of Silicon Carbide Nanoparticles Reinforced Magnesium Alloy (AZ91E) Metal Matrix Composite by Vacuum Stir Casting Method," SAE Technical Paper 2019-28-0169, 2019, https://doi.org/10.4271/2019-28-0169.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Haghshenas , M. and Gupta , M. Magnesium Nanocomposites: An Overview on Time-Dependent Plastic (Creep) Deformation Defence Technology 2018 10.1016/2018-08-008
- Shen , M.J. , Zhang , M.F. , and Ying , W.F. Processing, Microstructure and Mechanical Properties of Bimodal Size SiC p Reinforced AZ31B Magnesium Matrix Composites Journal of Magnesium and Alloys 3 162 167 2015 10.1016/2015-05-002
- Shen , M.J. , Wang , X.J. , Zhang , M.F. , Zhang , B.H. et al. Microstructure and Room Temperature Tensile Properties of 1μm- SiC p /AZ31B Magnesium Matrix Composite Journal of Magnesium and Alloys 3 155 161 2015 10.1016/2015-03-001
- Sameer Kumar , D. , Suman , K.N.S. , Tara Sasanka , C. , Ravindra , K. et al. Microstructure, Mechanical Response and Fractography of AZ91E/Al 2 O 3 (P) Nanocomposite Fabricated by Semi Solid Stir Casting Method Journal of Magnesium and Alloys 5 48 55 2017 10.1016/2016-11-006
- Jia , X. , Guo-hua , W. , Liu , W.-c. , Zhang , Y. et al. Effect of Rotating Gas Bubble Stirring Treatment on the Microstructures of Semi-Solid AZ91-2Ca Alloy Journal of Magnesium and Alloys 1 217 223 2013
- Adsul , Swapnil H. , Raju , Soma Sarada , B.V. , Sonawane , Shirish H. et al. Evaluation of Self-Healing Properties of Inhibitor Nanoclay-Based Anticorrosive Coatings on Magnesium Alloy AZ91D Journal of Magnesium and Alloys 000 1 10 2018 10.1016/2018-05-003
- Rashad , M. , Pan , F. , Asif , M. , She , J. et al. Improved Mechanical Properties of Magnesium Based Composites with Titanium - Aluminum Hybrids Journal of Magnesium and Alloys 3 1 9 2015 10.1016/2014-12-010
- Zhang , C.-L. , Wang , X.-J. , Wang , X.-M. , Hu , X.-S. et al. Fabrication, Microstructure and Mechanical Properties of Mg Matrix Composites Reinforced by High Volume Fraction of Sphere TC 4 Particles Journal of Magnesium and Alloys 4 286 294 2016 10.1016/2016-10-003
- Ratna Sunil , B. , Pradeep Kumar Reddy , G. , Patle , H. , and Dumpala , R. Magnesium Based Surface Metal Matrix Composites by Friction Stir Processing Journal of Magnesium and Alloys 4 52 61 2016 10.1016/2016-02-001
- Li , Z. , Luo , A.A. , Wang , Q. , Zou , H. et al. Fatigue Characteristics of Sand - Cast AZ91D Magnesium Alloy Journal of Magnesium and Alloys 5 1 12 2017 10.1016/2017-03-001
- Balasuramanian , I. , Maheswaran , R. , Manikandan , V. , Patil , N. et al. Mechanical Characterization and Machining of Squeeze Cast AZ91D/SiC Magnesium Based Metal Matrix Composites Procedia Engineering 20 97 105 2018 10.1016/2018-02-014
- Viswanath , A. , Dieringa , H. , Ajith Kumar , K.K. , Pillai , U.T.S. et al. Investigation on Mechanical Properties and Creep Behavior of Stir Cast AZ91-SiCp Composites Journal of Magnesium and Alloys 3 16 22 2015 10.1016/2015-01-001
- Aravindan , S. , Rao , P.V. , and Ponappa , K. Evaluation of Physical and Mechanical Properties of AZ91/SiC Composites by Two Step Stir Casting Process Journal of Magnesium and Alloys 3 52 62 2015 10.1016/2014-12-008
- Rashad , M. , Pan , F. , Liu , Y. , Chen , X. et al. High Temperature Formability of Grapheme Nanoplatelets-AZ31 Composites Fabricated by Stir-Casting Method Journal of Magnesium and Alloys 4 270 277 2016 10.1016/2016-11-003
- Zhu , T. , Fu , P. , Peng , L. , Hu , X. et al. Effects of Mn Addition on the Microstructure and Mechanical Properties of Cast mg-9Al-2Sn (Wt. %) Alloy Journal of Magnesium and Alloys 2 27 35 2014 10.1016/2014-01-003
- Selvam , B. , Marimuthu , P. , Narayanasamy , R. , Senthilkumar , V. et al. Effect of Temperature and Strain Rate on Compressive Response of Extruded Magnesium Nano Composite Journal of Magnesium and Alloys 3 224 230 2015 10.1016/2015-07-002