This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Design Analysis and 3D Printing of Non-Pneumatic Tyre
Technical Paper
2019-28-0059
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The major concern when implementing maneuvers are acceleration, braking and steering for the safety control which ultimately depends on the road and tyre surface friction. To withstand the vertical loads and maintain good traction with contact surface pneumatic tyres with high volume of pressurized air are required. To improve the comfort, handling and grip with low unsprung mass, non-pneumatic tyres are needed which are not reinforced with air pressure. The decreased effect of rolling resistance, added cushioning effect and better cellular shear band design increased the performance level than pneumatic tyres. Here, air is replaced by poly-composite spokes that eliminates the possibility of tyre going flat. This paper mainly discusses the environmental impact and stability issues of conventional pneumatic tyres and also focuses on the various possible design and components of an airless tyre. This paper also presents the modelling and analysis of non-pneumatic tyre followed by 3D printed sealed model using ABS (Acrylonitrile Butadiene Styrene) and TPU (Thermoplastic Polyurethane). Honeycomb structured cellular shear band made of polyurethane are tested with different shear band angles and loading conditions. The simulation results reveal that shear angle of 120o for non-pneumatic tyres is most promising that provides better ride and comfort.
Recommended Content
Authors
Topic
Citation
Kannan, P., Shaik, A., Kumar, Y., and Bareddy, N., "Design Analysis and 3D Printing of Non-Pneumatic Tyre," SAE Technical Paper 2019-28-0059, 2019, https://doi.org/10.4271/2019-28-0059.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Kunnappillil Madhusudhanan , A. , Corno , M. , Arat , M.A. , and Holweg , E. Load Sensing Bearing Based Road-Tyre Friction Estimation Considering Combined Tyre Slip Mechatronics 39 136 146 2016
- Egaji , O.A. , Salem , C. , and David , B. An Innovative Decision Rule Approach to Tyre Pressure Monitoring Expert Systems with Applications 124 252 270 2019
- Senatore , C. and Sandu , C. Off-Road Tyre Modeling and the Multi-Pass Effect for Vehicle Dynamics Simulation Journal of Terramechanics 48 265 276 2011
- Freitag , D.R. and Smith , M.E. Center-Line Deflection of Pneumatic Tyres Moving in Dry Sand J Terramechanics 3 1 31 46 1966
- Pacejka , H.B. Tyre and Vehicle Dynamics Third Edition Warrandale, PA SAE International/Butterworth Heinemann
- Reinhard , W. , Andreas , F. , and Claus , A. A Combined Approach for Correcting Tyre Hardness and Temperature Influence on Tyre/Road Noise Applied Acoustics 134 110 118 2018
- Inyong , P. , Hongsuk , K. , and Seokhwan , L. Characteristics of Tyre Wear Particles Generated in a Laboratory Simulation of Tyre/Road Contact Conditions Journal of Aerosol Science 124 30 40 Oct. 2018
- Rhyne , T.B. and Cron , S.M. Development of a Non-Pneumatic Wheel Tyre Science and Technology 34 3 150 169 Sept. 2006
- Ma , J. , Kolla , A. , Summers , J. , Joseph , P. et al. Numerical Simulation of New Generation Non-Pneumatic Tyre and Sand ASME Design Engineering Technical Conferences San Diego, CA Aug. 30-Sept. 2 2009
- Jin , X. , Hou , C. , Fan , X. , Sun , Y. et al. Investigation on the Static and Dynamic Behaviors of Non-pneumatic Tyres with Honeycomb Spokes Composite Structures 187 27 35 2018
- Pacejka , H. Tyre and Vehicle Dynamics Oxford Elsevier 2005
- Sharma , A.K. and Pandey , K.P. A Review on Contact Area Measurement of Pneumatic Tyre on Rigid and Deformable Surfaces Journal of Terramechanics 33 5 253 264 1996
- Ma , J. , Ju , J. , Summers , J. , Joseph , P. et al. Effects of Cellular Shear Bands on Interaction between a Non-pneumatic Tyre and Sand SAE Technical Paper 2010-01-0376 2010 10.4271/2010-01-0376
- Ma , J. Numerical Investigation of Dynamic Impact between Cellular Shear Band Based Non-Pneumatic Tyre and Sand with Obstacle SAE Technical Paper 2013-01-0631 2013 10.4271/2013-01-0631
- de Breyne Salvagni , R. Some Considerations about Longitudinal “Slip” on Car Tyres SAE Technical Paper 2013-36-0272 2013 10.4271/2013-36-0272
- Narasimhan , A. , Ziegert , J. , and Thompson , L. Effects of Material Properties on Static Load - Deflection and Vibration of a Non-Pneumatic Tyre during High-Speed Rolling SAE Technical Paper 2011-01-0101 2011 10.4271/2011-01-0101
- Qiancheng , Z. , Xiaohu , Y. , Peng , L. , Guoyou , H. et al. Bioinspired Engineering of Honeycomb Structure - Using Nature to Inspire Human Innovation Progress in Materials Science 74 332 400 Oct. 2015
- Collins , K.J. , Jensen , A.C. , Mallinson , J.J. , Roenelle , V. et al. Environmental Impact Assessment of a Scrap Tyre Artificial Reef ICES Journal of Marine Science 59 S243 S249 2002
- Abd El-Sayed , F.K. , Jones , R. , and Burgess , I.W. A Theoretical Approach to the Deformation of Honeycomb Based Composite Materials Composites 10 4 2090 2214 1979
- Alkadi , F. , Jeongwoo , L. , Jun-Seok , Y. , Seok-Ho , H. et al. 3D Printing of Ground Tyre Rubber Composites International Journal of Precision Engineering and Manufacturing-Green Technology 2018 2198-0810