This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Experimental and Computational Investigation of Particle Filtration Mechanisms in Partially Damaged DPFs

Journal Article
2019-24-0149
ISSN: 2641-9637, e-ISSN: 2641-9645
Published September 09, 2019 by SAE International in United States
Experimental and Computational Investigation of Particle Filtration Mechanisms in Partially Damaged DPFs
Sector:
Citation: Haralampous, O., Mastrokalos, M., Tzorbatzoglou, F., and Dritselis, C., "Experimental and Computational Investigation of Particle Filtration Mechanisms in Partially Damaged DPFs," SAE Int. J. Adv. & Curr. Prac. in Mobility 2(2):681-691, 2020, https://doi.org/10.4271/2019-24-0149.
Language: English

References

  1. Commission Regulation (EU) No 459/2012 of 29 May 2012, Official Journal of the European Union L142/16.
  2. Ntziachristos, L., Fragkiadoulakis, P., Samaras, Z., Janka, K., and Tikkanen, J. , “Exhaust Particle Sensor for OBD Application,” SAE Technical Paper 2011-01-0626 , 2011, doi:10.4271/2011-01-0626.
  3. Ochs, T., Schittenhelm, H., Genssle, A., and Kamp, B. , “Particulate Matter Sensor for on Board Diagnostics (OBD) of Diesel Particulate Filters (DPF),” SAE Technical Paper 2010-01-0307 , 2010, doi:10.4271/2010-01-0307.
  4. EN Horizon 2020 Work Programme 2018-2020, 11. Smart, green and integrated transport, LC-MG-1-4-2018, “Hardening Vehicle Environmental Protection Systems against Tampering,” Oct. 27, 2017.
  5. Samaras, Z. , “On Board Diagnostics Legislation for Euro 6/VI Light and Heavy Duty Vehicles in Europe,” in On-Board Diagnostics Symposium, Indianapolis, IN, August 24-26, 2010.
  6. Finch, S., Hnilicka, B., and Sindano, H. , “EURO6 Light Duty Vehicle OBD Project: Evaluation and Assessment of Proposed EOBD Emission Thresholds,” ACEA report Q51760, RD.10/320201.4, 2010.
  7. Samaras, Z., Geivainidis, S., Vermeulen, R. et al. , “Technical Feasibility of Different Regulatory OBD Threshold Limits (OTL) for Euro 6 (LD) Vehicles,” European Commission, DG Enterprise and Industry, Ref. Ares., 2015, doi:10.2769/32688.
  8. Kontses, D. , “Soot Emission Model for Real World Operating Conditions of a Diesel Engine Car,” Diploma thesis, UIN: 4866 Aristotle University of Thessaloniki, 2014.
  9. Bissett, E.J. , “Mathematical Model of the Thermal Regeneration of a Wall-Flow Monolith Diesel Particulate Filter,” Chem. Eng. Sci. 39(7-8):1233-1244, 1984.
  10. Bissett, E.J. and Shadman, F. , “Thermal Regeneration of Diesel Particulate Monolithic Filters,” AIChE Journal, 1985, doi:10.1002/aic.690310508.
  11. Haralampous, O. and Mastellos, D. , “A Multi-channel Mathematical Model For Partially Failed Diesel Particulate Filters,” in 8th GRACM, Volos, July 2015.
  12. Basu, S., Henrichsen, M., Tandon, P., He, S. et al. , “Filtration Efficiency and Pressure Drop Performance of Ceramic Partial Wall Flow Diesel Particulate Filters,” SAE Int. J. Fuels Lubr. 6(3):877-893, 2013, doi:10.4271/2013-01-9072.
  13. Haralampous, O. and Kontzias, T. , “Approximate Pressure Drop and Filtration Efficiency Expressions for Semi-Open Wall-Flow Channels,” Canadian Journal of Chemical Engineering 92:1517-1525, 2014.
  14. Haralampous, O. and Dritselis C. , “Modeling of the Loading in Partially Damaged DPFs,” MODEGAT IV, Bad-Herrenalb, September 2015.
  15. Barba, F., Vassallo, A., and Greco, V. , “Estimation of DPF Soot Loading through Steady-State Engine Mapping and Simulation for Automotive Diesel Engines Running on Petroleum-Based Fuels,” SAE Technical Paper 2017-24-0139 , 2017, doi:10.4271/2017-24-0139.
  16. Koltsakis, G.C., Haralampous, O.A., Margaritis, N.K., Samaras, Z.C. et al. , “3-Dimensional Modeling of the Regeneration in SiC Particulate Filters,” SAE Technical Paper 2005-01-0953 , 2005, doi:10.4271/2005-01-0953.
  17. Konstandopoulos, A.G., Kostoglou, M., Vlachos, N. et al. , “Advances in the Science and Technology of Diesel Particulate Filter Simulation,” Advances in Chemical Engineering, 2007, doi:10.1016/S0065-2377(07)33004-4.
  18. Koltsakis, G., Haralampous, O., Depcik, C. et al. , “Catalyzed diesel particulate filter modeling,” Rev Chem Eng, 2013, doi:10.1515/revce-2012-0008.
  19. Dabhoiwala, R., Johnson, J., Naber, J., and Bagley, S. , “A Methodology to Estimate the Mass of Particulate Matter Retained in a Catalyzed Particulate Filter as Applied to Active Regeneration and on-Board Diagnostics to Detect Filter Failures,” SAE Technical Paper 2008-01-0764 , 2008, doi:10.4271/2008-01-0764.
  20. Kandlikar, S.G., Schmitt, D., Carrano, A.L., and Taylor, J. B. , “Characterization of Surface Roughness Effects on Pressure Drop in Single-Phase Flow in Minichannels,” Physics of Fluids 17:100606, 2005.
  21. Suga, K., Matsumura, Y., Ashitaka, Y. et al. , “Effects of Wall Permeability on Turbulence,” Int J Heat Fluid Flow, 2010, doi:10.1016/2010.02.023.

Cited By