This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Ultra-Lean Pre-Chamber Gasoline Engine for Future Hybrid Powertrains

Journal Article
2019-24-0104
ISSN: 2641-9637, e-ISSN: 2641-9645
Published September 09, 2019 by SAE International in United States
Ultra-Lean Pre-Chamber Gasoline Engine for Future Hybrid Powertrains
Sector:
Citation: Serrano, D., Zaccardi, J., Müller, C., Libert, C. et al., "Ultra-Lean Pre-Chamber Gasoline Engine for Future Hybrid Powertrains," SAE Int. J. Adv. & Curr. Prac. in Mobility 2(2):607-622, 2020, https://doi.org/10.4271/2019-24-0104.
Language: English

References

  1. The International Council on Clean Transportation https://www.theicct.org/sites/default/files/publications/EU-LCV-CO2-2030_ICCTupdate_201901.pdf 2019
  2. International Energy Agency 2012 10.1787/20792603
  3. Brossard , J.-L. The Energy Mix and Its Impact on Multiple Automotive Topics SIA Powertrain Conference 2018
  4. Subramanian , V. , Gillet , R. , and De Paola , G. Future Evolutions of Diesel Engine Technology and Its Powertrain Trends Influencing CO 2 Emissions in Europe SIA Powertrain Conference 2018
  5. Iida , N. Research and Development of Super-Lean Burn for High Efficiency SI Engine. Challenge for Innovative Combustion Technology to Achieve 50% Thermal Efficiency 9th Conference on Modeling and Diagnostics for Advanced Engine Systems (COMODIA) 2017 10.1299/jmsesdm.2017.9.PL-1
  6. Jung , D. , Sasaki , K. , Sugata , K. , Matsuda , M. et al. Combined Effects of Spark Discharge Pattern and Tumble Level on Cycle-to-Cycle Variations of Combustion at Lean Limits of SI Engine Operation SAE Technical Paper 2017-01-0677 2017 10.4271/2017-01-0677
  7. Moriyoshi , Y. , Kuboyama , T. , Kaneko , M. , Yamada , T. et al. Fuel Stratification Using Twin-Tumble Intake Flows to Extend Lean Limit in Super-Lean Gasoline Combustion SAE Technical Paper 2018-01-1664 2018 10.4271/2018-01-1664
  8. Mazda Next-Generation Technology 2017 https://insidemazda.mazdausa.com/press-release/mazda-next-generation-technology-press-information/ 2019
  9. Luszcz , P. , Takeuchi , K. , Pfeilmaier , P. , Gerhardt , M. , Adomeit , P. , Brunn , A. , Kupiek , C. , and Franzke , B. Homogeneous Lean Burn Engine Combustion System Development Concept Study 18th Stuttgart International Symposium 2018 10.1007/978-3-658-21194-3_19
  10. Ratnak , S. , Kusaka , J. , Daisho , Y. , Yoshimura , K. et al. Experiments and Simulations of a Lean-Boost Spark Ignition Engine for Thermal Efficiency Improvement SAE Int. J. Engines 9 1 379 396 2016
  11. Nakata , K. , Nogawa , S. , Takahashi , D. , Yoshihara , Y. et al. Engine Technologies for Achieving 45% Thermal Efficiency of S.I. Engine SAE Int. J. Engines 9 1 2016 10.4271/2015-01-1896
  12. Iafrate , N. and Zaccardi , J.-M. A Numerical Study on Charge Motion Effects in Ultra-Lean Conditions Converge User Conference 2018
  13. Trost , J. , Laget , O. , Cordier , M. , Duffour , F. , and Gautrot , X. Increasing Modern Spark Ignition Engine Efficiency: Optimization of Intake Ports Dedicated to Miller Cycle, High Dilution and Increased Compression Ratio SIA Powertrain Conference 2017
  14. Bunce , M. and Blaxill , H. Sub-200 g/kWh BSFC on a Light Duty Gasoline Engine SAE Technical Paper 2016-01-0709 2016 10.4271/2016-01-0709
  15. Sens , M. , Binder , E. , Reinicke , P.-B. , Rieß , M. , Stappenbeck , T. , and Woebke , M. Pre-Chamber Ignition and Promising Complementary Technologies 27th Aachen Colloquium Automobile and Engine Technology 2018
  16. Müller , C. , Habermann , K. , Morcinkowski , B. , Uhlmann , T. , and Schernus , C. Development of a Pre-Chamber for Spark-Ignition Engines in Vehicle Applications 4th International Conference on Ignition Systems for Gasoline Engines 2018 10.5445/ir/1000088588
  17. Bozza , F. , De Bellis , V. , Tufano , D. , Malfi , E. et al. A Quasi-Dimensional Model of Pre-Chamber Spark-Ignition Engines SAE Technical Paper 2019-01-0470 2019 10.4271/2019-01-0470
  18. Clasen , K. , Koopmans , L. , and Dahl , D. Homogeneous Lean Combustion in a 2lt Gasoline Direct Injected Engine with an Enhanced Turbo Charging System SAE Technical Paper 2018-01-1670 2018 10.4271/2018-01-1670

Cited By