This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Gasoline Fuel Sprays Characterization at Very-High Injection Pressures
Technical Paper
2019-01-2344
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
In the modern GDI systems, the optimization of the fuel injection process is essential to prepare an air-fuel mixture capable to promote efficient combustion and reduce fuel consumption and pollutant emissions. A key feature for a better atomization is the fuel injection pressure. The increasing of the injection pressure is considered a good way for particle number (PN) reduction due to improved spray atomization, faster evaporation and better mixture formation.
In this paper, a multi-hole GDI injector was tested to investigate the effects of very high injection pressures (IVHP), in addition to different ambient densities and temperatures, on the fuel spray morphology, in a cycle-resolved images analysis. Commercial gasoline was injected at the pressures ranging between 40.0 to 70.0 MPa, at gas densities varying between 1.12 to 11.5 kg/m3, and gas temperature up to 200°C. Sequences of liquid and vapor images of the injected fuel were captured by Mie-scattering and shadowgraph optical techniques on a high-speed C-Mos camera and the characteristic parameters of the jets, tip penetrations, cone-angles, and fuel spread were extracted for both the phases by a customized image-processing procedure developed in C#. The effects of the single parameters affecting the spray evolutions, remaining constant the residual parameters, are reported and analyzed.
Authors
Topic
Citation
Montanaro, A., Allocca, L., and Meccariello, G., "Gasoline Fuel Sprays Characterization at Very-High Injection Pressures," SAE Technical Paper 2019-01-2344, 2019, https://doi.org/10.4271/2019-01-2344.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Zaho , H. Advanced direct injection combustion engine technologies and development Cambridge Woodhead Publishing Limited 2010
- Stan , C. Direct injection systems for spark-ignition and compression-ignition engines SAE Publication 2000
- Van Der Wege B.A. , Han Z. Iyer C.O. , Munoz R.B. , Yi J. Development and analysis of a spray-guided DISI combustion system concept SAE paper 2003-01-3105 2003
- Kalghatgi , G.T. , Risberg , P. , and Angstrom , H.-E. SAE Int. 2007 10.4271/2007-01-0006
- Manente , V. , Johansson , B. , and Cannella , W. Gasoline partially premixed combustion, the future of internal combustion engines Int. J. Engine Res. 12 3 194 208 2011 10.1177/1468087411402441
- Herweg R. , Haase D. , Dieler T. , Berndt F. , Rottenkolber G. Lean Burn Combustion for Gasoline Engines: Potential of High Frequency Ignition and High Pressure Injection 13th Stuttgart International Conference Automotive and Engine Technology 2013
- Commission Regulation (EU) http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:32012R0459:en:NOT
- Klauer N. , Kluting M. , Schunemann E. , Schwarz C. , Steinparzer F. BMW TwinPower Turbo Gasoline Engine Technology - Enabling Compliance with worldwide Exhaust Gas Emissions Requirements 34th Vienna Motor Symposium 2013
- Stadler , A. Brunner , R. , Hartl , M. , Wachtmeister , G. , Sauerland , H. Experimental Investigations on High Pressure Gasoline Injection up to 800 bar for Different Combustion Modes 27th Aachen Colloquium Automobile and Engine Technology 2018 1089
- Wang , C. , Xu , H. , Herreros , J.M. Wang , J. , Cracknell , R. Impact of fuel and injection system on particle emissions from a GDI engine Applied Energy 132 2014 178 191
- Lee , S. , Park , S. Experimental study on spray break-up and atomization processes from GDI injector using high injection pressure up to 30MPa 2014 International Journal of Heat and Fluid Flow 45 1 14 22
- Moon , S. , Li , T. , Sato , K. , Yokohata , H. Governing parameters and dynamics of turbulent spray atomization from modern GDI injectors 2017 Energy 127 89 100
- Postrioti , L. , Cavicchi , A. , Brizi , G. , Berni , F. et al. Experimental and Numerical Analysis of Spray Evolution, Hydraulics and Atomization for a 60 MPa Injection Pressure GDI System SAE Technical Paper 2018-01-0271 2018 https://doi.org/10.4271/2018-01-0271
- Yamaguchi , A. , Koopmans , L. , Helmantel , A. , Karrholm , F. et al. Spray characterization of Gasoline Direct Injection sprays under fuel injection pressures up to 150 MPa with different nozzle geometries SAE Technical Paper 201901-0063 2019
- Montanaro , A. , Allocca , L. , and Lazzaro , M. Iso - Octane Spray from a GDI Multi-Hole Injector under Non- and Flash Boiling Conditions SAE Technical Paper 2017-01-2319 2017 10.4271/2017-01-2319
- Hung , D. , Harrington , D. , Gandhi , A. , Markle , L. et al. Gasoline Fuel Injector Spray Measurement and Characterization - A New SAE J2715 Recommended Practice SAE Int. J. Fuels Lubr. 1 1 534 548 2009 10.4271/2008-01-1068
- Medina , M. , Fatouraie , M. , and Wooldridge , M. High-Speed Imaging Studies of Gasoline Fuel Sprays at Fuel Injection Pressures from 300 to 1500 bar SAE Technical Paper 2018-01-0294 2018 https://doi.org/10.4271/2018-01-0294