This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Characteristics of Flat-Wall Impinging Spray Flame and Its Heat Transfer under Diesel Engine-Like Condition: Effects of Injection Pressure, Nozzle Hole Diameter and Impingement Distance

Journal Article
2019-01-2183
ISSN: 2641-9637, e-ISSN: 2641-9645
Published December 19, 2019 by SAE International in United States
Characteristics of Flat-Wall Impinging Spray Flame and Its Heat Transfer under Diesel Engine-Like Condition: Effects of Injection Pressure, Nozzle Hole Diameter and Impingement Distance
Sector:
Citation: Mahmud, R., Kurisu, T., Akgol, O., Nishida, K. et al., "Characteristics of Flat-Wall Impinging Spray Flame and Its Heat Transfer under Diesel Engine-Like Condition: Effects of Injection Pressure, Nozzle Hole Diameter and Impingement Distance," SAE Int. J. Adv. & Curr. Prac. in Mobility 2(1):319-329, 2020, https://doi.org/10.4271/2019-01-2183.
Language: English

References

  1. Kokjohn , S. , Hanson , R. , Splitter , D. , Kaddatz , J. et al. Fuel Reactivity Controlled Compression Ignition (RCCI) Combustion in Light- and Heavy-Duty Engines SAE Int. J. Engines 4 1 360 374 2011 https://doi.org/10.4271/2011-01-0357
  2. Arato , K. and Takashima , T. , A Study on Reduction of Heat Loss by Optimizing Combustion Chamber Shape SAE Int. J. Engines 8 2 2015 https://doi.org/10.4271/2015-01-0786
  3. Chong , M.S. and Watson , H.C. Prediction of Heat Mass Transfer during Compression in Reciprocating International Compressor Engineering Conference 1976
  4. Dahlstrom , J. , Andersson , O. , Persson , H. , and Tuner , M. IMECE2015-53606 1 11 2015
  5. Kono , M. , Basaki , M. , Ito , M. , Hashizume , T. et al. Cooling Loss Reduction of Highly Dispersed Spray Combustion with Restricted In-Cylinder Swirl and Squish Flow in Diesel Engine SAE Int. J. Engines 5 2 2012 https://doi.org/10.4271/2012-01-0689
  6. Nakata , M. , Arai , N. , Maeda , S. , Tatsumi , T. et al. A Study on the Wall Heat Loss in Diesel Spray Flame (Sixth Report: Effects of Impingement Distance and Inclination Angle of the Wall on the Heat Flux) JSAE Proceedings 2017 3-17 76 81
  7. Senda , J. , Yamada , K. , Fujimoto , H. , and Miki , H. , The Heat-Transfer Characteristics of a Small Droplet Impinging upon a Hot Surface JSME International Journal Series II 31 1 1988
  8. Senda , J. , Fujimoto , H. , Kobayashi , M. , Yamamoto , K. et al. Heat Transfer Characteristics of Diesel Spray Impinging on Wall Bulletin of the JSME 23 2 1995
  9. Li , S.W. , Kamimoto , T. , and Kobori , S. , Heat Transfer from Impinging Diesel Flames to the Combustion Chamber Wall SAE Int. J. Fuels Lubr. 5 1 1 6 19972 https://doi.org/10.4271/2011-01-1746
  10. Tatsumi , T. , Maeda , S. , Nakata , M. , Kobashi , Y. et al. A Study on the Wall Heat Loss from Diesel Spray Flame (Fourth Report: Effects of Nozzle Hole Diameter on the Heat Flux) JSAE Transactions 49 2 144 149 2018 https://doi.org/10.11351/jsaeronbun.49.144
  11. Tatsumi , T. , Maeda , S. , Miyata , S. , Kobashi , Y. et al. A Study on the Wall Heat Loss in Diesel Spray Flame (First Report: Effects of Injection Pressure on the Heat Flux) JSAE Transactions 47 6 1291 1296 2016 https://doi.org/10.11351/jsaeronbun.47.1291
  12. Mahmud , R. , Kim , S.B. , Kurisu , T. , and Nishida , K. , Characteristics of Flat-Wall Impinging Spray Flame and Its Heat Transfer under Small Diesel Engine-Like Condition 23rd Small Engine Technology Conference 2017 1 7
  13. Ishii , A. , Nagano , H. , Adachi , K. , Kimura , S. et al. Measurement of Instantaneous Heat Flux Flowing into Ceramic Combustion Chamber Walls SAE Technical Paper 2000-01-1815 2000 https://doi.org/10.4271/2000-01-1815
  14. Bai , C. and Gosman , A. , Development of Methodology for Spray Impingement Simulation SAE Technical Paper 950283 1995 https://doi.org/10.4271/950283
  15. Pickett , L. , Kook , S. , and Williams , T. , Transient Liquid Penetration of Early-Injection Diesel Sprays SAE Int. J. Engines 2 1 785 804 2009 https://doi.org/10.4271/2009-01-0839
  16. Mahmud , R. , Kurisu , T. , Nishida , K. et al Characteristics of Flat-Wall Impinging Spray Flame and Its Heat Transfer under Small Diesel Engine-Like Condition 3rd Report: Effect of Oxygen Concentration ICATECH-2018. IOP Conference Series: Materials Science and Engineering 462 012046 2019
  17. Mahmud , R. , Kurisu , T. , Nishida , K. et al. Experimental Study on Flat-Wall Impinging Spray Flame and Its Heat Flux on Wall under Diesel Engine–Like Condition (First Report: Effect of Impingement Distance) Journal of Automobile Engineering, IMechE, Part D 2018
  18. Gramlich , R. , Leick , P. , Kaleta , J. , Miller , A. et al. Air Entrainment and Momentum Distribution in the Near Field of Diesel Sprays from Group Hole Nozzles ILASS-Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems 2016 1
  19. Baumgarten , C. , Mixture Formation in Internal Combustion Engines 2006 11
  20. Arcoumanis , C. , Cutter , P. , and Whitelaw , D.S. , Heat Transfer Processes in Diesel Engines 76 2 124 132 1998

Cited By