This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Enhancing Peak Firing Pressure Limit for Achieving Better Brake Thermal Efficiency of a Diesel Engine
Technical Paper
2019-01-2180
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
An increased cycle expansion ratio is beneficial from a thermodynamic viewpoint to increase the engine efficiency. In this study, the target compression ratio and corresponding thermodynamic cycle layout were investigated by means of a new ideal combustion cycle. To model the experimental pressure traces, the combustion was divided into three parts; constant volume combustion, early expansion combustion and late combustion. This study discussed optimal parameter values for compression ignition combustion under PFP constraints. These parameters included compression ratio, pressure ratios as well as cut-off ratios. Furthermore, this study experimentally investigated the limitation of thermal efficiency and the variation of energy losses under different geometric compression ratios, boosting pressure and degree of constant volume combustion. These experiments utilized a supercharged single-cylinder heavy duty diesel engine with PFP-capability of up to 30 MPa. In conclusion, it is confirmed that improvement in the indicated thermal efficiency and BTE was achieved by increasing the compression ratio. The trade-off between increased compression ratio and higher losses was also established and an optimum compression ratio found.
Topic
Citation
Enya, K. and Uchida, N., "Enhancing Peak Firing Pressure Limit for Achieving Better Brake Thermal Efficiency of a Diesel Engine," SAE Technical Paper 2019-01-2180, 2019, https://doi.org/10.4271/2019-01-2180.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 |
Also In
References
- Nyrenstedt , G. , Alturkestani , T. , Im , H. , and Johansson , B. CFD Study of Heat Transfer Reduction Using Multiple Injectors in a DCEE Concept SAE Technical Paper 2019-01-0070 2019 https://doi.org/10.4271/2019-01-0070
- Uchida , N. and Osada , H. A New Piston Insulation Concept for Heavy-Duty Diesel Engines to Reduce Heat Loss from the Wall SAE Int. J. Engines 10 5 2017-24-0161 2565 2574 2017 10.4271/2017-24-0161
- Uchida , N. , Fukunaga , A. , Osada , H. , and Shimada , K. Further Improvement in Brake Thermal Efficiency of a Single-Cylinder Diesel Engine by Means of Independent Control of Effective Compression and Expansion Ratios SAE Technical Paper No. 2014-01-1198 2014 10.4271/2014-01-1198
- Bhavani Shankar , V. , Johansson , B. , and Andersson , A. Double Compression Expansion Engine: A Parametric Study on a High-Efficiency Engine Concept SAE Technical Paper 2018-01-0890 2018 10.4271/2018-01-0890
- Girbach , J. www.energy.gov/sites/prod/files/2018/06/f52/
- Norling , D. 2018
- Caton , J.A. Maximum efficiencies for internal combustion engines: Thermodynamic limitations International Journal of Engine Research 19 10 1005 1023 2018 10.1177/1468087417737700
- Funayama , Y. , Nakajima , H. , and Shimokawa , K. A Study on the Effects of a Higher Compression Ratio in the Combustion Chamber on Diesel Engine Performance SAE Technical Paper 2016-01-0722 2016 https://doi.org/10.4271/2016-01-0722
- Uchida , N. and Watanabe , H. ACCORDIC (ACtively COntrolled Rate of DIesel Combustion) Up-date: Simultaneous Improvements in Brake Thermal Efficiency and Heat Loss in a Heavy-duty Diesel Engine with Multiple Fuel Injectors Proceedings of THIESEL 2018 2018
- Andersson , A. Over-Expansion, the Key to High Efficiency SAE 2017 High Efficiency IC Engine Symposium
- Hiroyasu , H. , and Arai , M. Fuel Spray Penetration and Spray Angle of Diesel Engines Transaction of JSAE 21 5 11 1980
- Uchida , N. , Okamoto , T. , and Watanabe , H. A new concept of actively controlled rate of diesel combustion for improving brake thermal efficiency of diesel engines: Part 1-verification of the concept International Journal of Engine Research 19 4 474 487 2018 10.1177/1468087417720332
- Woschni , G. A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine SAE Technical Paper 670931 1967 10.4271/670931
- Chen , S. , and Flynn , P. Development of a Single Cylinder Compression Ignition Research Engine SAE Technical Paper 650733 1965 10.4271/650733
- Tsurushima , T. , Harada , A. , Iwashiro , Y. , Enomoto , Y. , Asaumi , Y. , and Aoyagi , Y. Thermodynamic Characteristics of Premixed Compression Ignition Combustions SAE Technical Paper 2001-01-1891 2001 10.4271/2001-01-1891
- Enya , K. , Watanabe , H. , and Uchida , N. Investigation into the Optimized Heat Release Rate and Corresponding Variation of In-Cylinder Specific Heat Ratio for the Improvement in Thermal Efficiency by Utilizing Two-Zone Combustion Model Analysis SAE Technical Paper 2018-01-1796 2018 10.4271/2018-01-1796