Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

TAIZAC -TAndem Injectors Zapping ACtivation- for Thermal Efficiency Improvement of Diesel Engine

Journal Article
2019-01-2179
ISSN: 2641-9645, e-ISSN: 2641-9645
DOI: https://doi.org/10.4271/2019-01-2179
Published December 19, 2019 by SAE International in United States
TAIZAC -TAndem Injectors Zapping ACtivation- for Thermal Efficiency Improvement of Diesel Engine
Sector:
Citation: Aizawa, T., Akiyama, S., Shimada, T., Toyama, Y. et al., "TAIZAC -TAndem Injectors Zapping ACtivation- for Thermal Efficiency Improvement of Diesel Engine," SAE Int. J. Adv. & Curr. Prac. in Mobility 2(1):310-318, 2020, https://doi.org/10.4271/2019-01-2179.
Language: English

References

  1. Heywood , J.B. Internal Combustion Engine Fundamentals New York McGraw-Hill 1988 506
  2. SIP Innovative Combustion Technology website http://www.jst.go.jp/sip/k01.html
  3. Kondo , K. , Kuribayashi , M. , Sakai , K. , and Aizawa , T. High-Speed Ultraviolet Chemiluminescence Imaging of Late Combustion in Diesel Spray Flame Intl J. of Engine Research 18 1-2 93 104 2017
  4. Hasegawa , N. , Horie , R. , Aizawa , T. , Adachi , T. , Zhou , B. , Kuboyama , T. , and Moriyoshi , Y. Analysis of Heat Release Process during Late Combustion in a Diesel Engine JSAE Transaction 49 3 581 589 2018
  5. Fareez , M. , Toyama , Y. , Takahara , K. , Saruwatari , S. et al. Optical Diagnostics of Inversed-Delta Rate Shaping Diesel Spray Flame towards Reduction of Late Combustion SAE Technical Paper 2018-01-1793 2018 https://doi.org/10.4271/2018-01-1793
  6. Adachi , T. , Zhou , B. , Kusaka , J. , and Aizawa , T. Numerical Analysis on Temporal and Spatial Distribution of Equivalence Ratio and Heat Release Rate in Diesel Spray Combustion by Using Les Coupled with Detailed Chemistry Proc. of JSAE Spring Congress 62-18 6 2018
  7. Musuculus , M. and Kattke , K. Entrainment Waves in Diesel Jets SAE Int. J. Engines 2 1 1170 1193 2009 https://doi.org/10.4271/2009-01-1355
  8. Hu , B. , Musculus , M. , and Oefelein , J. The Influence of Large-Scale Structures on Entrainment in a Decelerating Transient Turbulent Jet Revealed by Large Eddy Simulation Physics of Fluids 24 045106 2012
  9. Uchida , N. , Daisho , Y. , and Saito , Y. The Control of Diesel Emissions by Supercharging and Varying Fuel-Injection Parameters SAE Technical Paper 920117 1992 https://doi.org/10.4271/920117
  10. Beck , N.J. and Chen , S.K. Injection Rate Shaping and High Speed Combustion Analysis - New Tools for Diesel Engine Combustion Development SAE Technical Paper 900639 1990 https://doi.org/10.4271/900639
  11. Nishimura , T. , Satoh , K. , Takahashi , S. , and Yokota , K. Effects of Fuel Injection Rate on Combustion and Emission in a DI Diesel Engine SAE Technical Paper 981929 1998 https://doi.org/10.4271/981929
  12. Kato , A. , Matsuura , K. , Hakozaki , T. , Suzuki , O. et al. Influence of a Fast Injection Rate Common Rail Injector for the Spray and Combustion Characteristics of Diesel Engine SAE Technical Paper 2011-01-0687 2011 https://doi.org/10.4271/2011-01-0687
  13. Wakisaka , Y. and Azetsu , A. Effect of Fuel Injection Rate Shaping and Injection Pressure on Intermittent Spray Combustion SAE Technical Paper 2000-01-2793 2000 https://doi.org/10.4271/2000-01-2793
  14. Atzler , F. , Kastner , O. , Rotondi , R. , and Weigand , A. Multiple Injection and Rate Shaping Part 1: Emissions Reduction in Passenger Car Diesel Engines SAE Technical Paper 2009-24-0004 2009 https://doi.org/10.4271/2009-24-0004
  15. Akagi , J. , Edo , T. , Sakasai , T. , and Tsumura , Y. A New Accumulator Fuel Injection System for Direct Injection Diesel Engines SAE Technical Paper 821114 1982 https://doi.org/10.4271/821114
  16. Tanabe , K. , Nakayama , S. , and Kohketsu , S. Fuel Injector Apparatus of Engine 2004
  17. Kawamura , K. , Hotta , Y. , Wakisaka , Y. , and Nakakita , K. 2004
  18. Matsumoto , S. , Yamada , K. , and Date , K. Concepts and Evolution of Injector for Common Rail System SAE Technical Paper 2012-01-1753 2012 https://doi.org/10.4271/2012-01-1753
  19. Ueda , D. , Tanada , H. , Utsunomiya , A. , Kawamura , J. , and Weber , J. 4th Generation Diesel Piezo Injector (Realizing Enhanced High Response Injector) SAE Technical Paper 2016-01-0846 2016 https://doi.org/10.4271/2016-01-0846
  20. Sahoo , D. , Miles , P.C. , Trost , J. , and Leipertz , A. The Impact of Fuel Mass, Injection Pressure, Ambient Temperature, and Swirl Ratio on the Mixture Preparation of a Pilot Injection SAE Int. J. Engines 6 3 1716 1730 2013 https://doi.org/10.4271/2013-24-0061

Cited By

Recommended Content

Aerospace Standard Design Considerations for Enclosed Turboprop Engine Test Cells
Aerospace Standard Aircraft Ground Support Equipment – General Requirements
Technical Paper Transient Calibration on the TestBed for Emissions and Driveability