This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Simulation of Aircraft Assembly via ASRP Software
Technical Paper
2019-01-1887
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Event:
AeroTech Europe
Language:
English
Abstract
ASRP (Assembly Simulation of Riveting Process) software is a special tool for assembly process modelling for large scale airframe parts. On the base of variation simulation, ASRP provides a convenient way to analyze, verify and optimize the arrangement of temporary fasteners. During the assembly of airframe certain criteria on residual gap between parts must be fulfilled. The numerical approach implemented in ASRP allows to evaluate the quality of contact on every stage of assembly process and solve verification and optimization problems for temporary fastener patterns. The paper is devoted to description of several specialized approaches that combine statistical analysis of measured data and numerical simulation using high-performance computing for optimization of fastener patterns, calculation of forces in fasteners needed to close initial gaps, and identification of hazardous areas in junction regions via ASRP software.
Recommended Content
| Technical Paper | System Modeling of A Damper Module |
| Technical Paper | Polymer injection molding parameters optimization into computational analysis using design of experiments methodologies |
Authors
- Nadezhda Zaitseva - Peter the Great St. Petersburg Polytechnic University
- Tatiana Pogarskaia - Peter the Great St. Petersburg Polytechnic University
- Olga Minevich - Peter the Great St. Petersburg Polytechnic University
- Julia Shinder - Peter the Great St. Petersburg Polytechnic University
- Elodie Bonhomme - Airbus
Topic
Citation
Zaitseva, N., Pogarskaia, T., Minevich, O., Shinder, J. et al., "Simulation of Aircraft Assembly via ASRP Software," SAE Technical Paper 2019-01-1887, 2019, https://doi.org/10.4271/2019-01-1887.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 |
Also In
References
- Yang , D. , Qu , W. , and Ke , Y. Evaluation of Residual Clearance after Pre-Joining and Pre-Joining Scheme Optimization in Aircraft Panel Assembly Assembly Automation 36 4 376 387 2016 10.1108/AA-12-2015-129
- Söderberg , R. , Lindkvist , L. , Wärmefjord , K. , and Carlson , J. Virtual Geometry Assurance Process and Toolbox 14th CIRP CAT 2016 2016 vol. 43 3 12 10.1016/j.procir.2016.02.043
- Falgarone , H. , Thiébaut , F. , Coloos , J. , and Mathieu , L. 2016 Variation Simulation During Assembly of Non-Rigid Components. Realistic Assembly Simulation with ANATOLEFLEX Software 14th CIRP CAT 2016 2016 vol. 43 202 207 10.1016/j.procir.2016.02.336
- Wärmefjord , K. , Söderberg , R. , Lindau , B. , Lindkvist , L. , and Lorin , S. Joining in Nonrigid Variation Simulation Computer-Aided Technologies - Applications in Engineering and Medicine 2016 10.5772/65851
- Corrado , A. , and Polini , W. Variation Analysis of Compliant Parts in Composite Material Joined by Adhesive: A Numerical Tool ASME. J. Manuf. Sci. Eng. 140 9 2018 10.1115/1.4040426
- Zhang , L. , Wang , H. , Li , S. , and Lin , Z. Variation Propagation Modeling and Pattern Mapping Method for Aircraft Assembly Structure Considering Residual Stress From Manufacturing Process Proceedings of the Institution of Mechanical Engineers 2015 10.1177/0954405415592197
- Lupuleac , S. , Petukhova , M. , Shinder , J. , Smirnov , A. et al. Software Complex for Simulation of Riveting Process: Concept and Applications SAE Technical Paper 2016-01-2090 2016 10.4271/2016-01-2090
- Lupuleac , S. , Kovtun , M. , Rodionova , O. , and Marguet , B. Assembly Simulation of Riveting Process SAE Int. J. Aerosp. 2 193 198 2010 10.4271/2009-01-3215
- Lupuleac , S. , Petukhova , M. , Shinder , Y. , and Bretagnol , B. Methodology for Solving Contact Problem During Riveting Process SAE Int. J. Aerosp. 4 2 952 957 2011 10.4271/2011-01-2582
- Petukhova , M. , Lupuleac , S. , Shinder , Y. , Smirnov , A. et al. Numerical Approach for Airframe Assembly Simulation Journal of Mathematics in Industry 4 1 8 2014 10.1186/2190-5983-4-8
- Lupuleac , S. , Shinder , Y. , Petukhova , M. , Yakunin , S. et al. Development of Numerical Methods for Simulation of Airframe Assembly Process SAE Int. J. Aerosp. 6 1 101 105 2013 10.4271/2013-01-2093
- Lupuleac , S. , Petukhova , M. , Stefanova , M. , Shinder , Y. et al. Simulation of Riveting Process in Case of Unsupported Part Presence SAE Technical Paper 2015-01-2396 2015 10.4271/2015-01-2396
- Lupuleac , S. , Zaitseva , N. , Stefanova , M. , Berezin , S. et al. Simulation and Optimization of Airframe Assembly Process ASME International Mechanical Engineering Congress and Exposition 2A 2018 10.1115/IMECE2018-87058
- Stefanova , M. , Yakunin , S. , Petukhova , M. , Lupuleac , S. , and Kokkolaras , M. An Interior-Point Method-Based Solver for Simulation of Aircraft Parts Riveting Engineering Optimization 50 5 781 796 2017 10.1080/0305215X.2017.1355367
- Lupuleac , S. , Zaitseva , N. , Stefanova , M. , Berezin , S. et al. Simulation of the Wing-To-Fuselage Assembly Process ASME. J. Manuf. Sci. Eng. 141 6 061009 061009 2019 10.1115/1.4043365
- Merkley , K. 1998
- Camelio , J. , Hu , S. , and Marin , S. Compliant Assembly Variation Analysis Using Component Geometric Covariance ASME J. Manuf. Sci. Eng. 126 2 355 360 2004 10.1115/1.1644553
- Aderiani , A. , Wärmefjord , K. , and Söderberg , R. A Multistage Approach to the Selective Assembly of Components Without Dimensional Distribution Assumptions ASME. J. Manuf. Sci. Eng. 140 7 071015 2018 10.1115/1.4039767
- Pogarskaia , T. , Churilova , M. , Petukhova , M. , and Petukhov , E. Simulation and Optimization of Aircraft Assembly Process Using Supercomputer Technologies RuSCDays 2018 Communications in Computer and Information Science 2018 vol. 965 10.1007/978-3-030-05807-4_31
- Zaitseva , N. , Lupuleac , S. , Petukhova , M. , Churilova , M. , Pogarskaia , T. , and Stefanova , M. High Performance Computing for Aircraft Assembly Optimization 2018 Global Smart Industry Conference IEEE 2018 10.1109/GloSIC.2018.8570136
- Guittard , D. , Eve , O. , Fort , F. , Colmagro , J. , and Loyant , F. 2012
- Lupuleac , S. , Zaitseva , N. , Petukhova , M. , Shinder , Y. et al. Combination of Experimental and Computational Approaches to A320 Wing Assembly SAE Technical Paper 2017-01-2085 2017 10.4271/2017-01-2085
- Zaitseva , N. and Berezin , S. A Methodology for Fasteners Placement to Reduce Gap between the Parts of a Wing Quintela , P. et al. Progress in Industrial Mathematics at ECMI 2016 2017 vol. 26 769 776 10.1007/978-3-319-63082-3_113 769