This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Development of Gear Tooth Micro Geometry Analysis Method for the Transmission Gear Noise Robustness
Technical Paper
2019-01-1414
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Transmission error has been well known as the main source of excitation about transmission gear whine noise. To minimize transmission error in the gear system, various analysis methods have been studied and applied for long time. Many researchers were focused on gear micro geometry to achieve the low level of transmission error. But, if the gear is misaligned by several factors such as clearance and manufacturing tolerance error, then the gear noise can rapidly and unexpectedly be increased.
To overcome this problem, this new analysis method has been developed and introduced.
A transmission system simulation model was constructed, which considers various factors of transmission components such as clearance, stiffness and so on. The deformation and vibration characteristics of finite element models were validated by making comparison with frequency response function experiment.
Through the Placket-Burman screening method, the lead slope was found out one of the most sensitive factor for the transmission error. Full factorial combination analysis for the lead slope was performed under the various driving conditions. As a result, the transmission error distribution map according to the gear tooth modifications and various torque conditions was introduced. The transmission error map proposed by this analysis could make it easy to find the correction of gear micro geometry which is robust to noise.
After all, vibration distribution of new planetary gear could result in 5dB reduction compared to former transmission. Hyundai-Motors 8 speed automatic transmission was developed successfully by using this new analysis method.
Recommended Content
Authors
Citation
Choi, J., Lee, H., Suh, H., and Lee, S., "The Development of Gear Tooth Micro Geometry Analysis Method for the Transmission Gear Noise Robustness," SAE Technical Paper 2019-01-1414, 2019, https://doi.org/10.4271/2019-01-1414.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 |
Also In
References
- Lee , H.K. , Kim , M.S. , Suh , H.S. , Kim , J.H. et al. Research for the Development of a pRMC Program for the Planetary Gear Noise KSNVE 23-7 669 674 2013
- Shin , W. , Kanase , A. , Hwang , S.W. , Baek , S.B. et al. 6 Speed Automatic Transmission Vibration Magnitude Prediction and Whine Noise Improvement through Transmission System Modeling SAE Technical Paper 2011-01-1553 2011 10.4271/2011-01-1553
- Houser , D.R. and Harianto , J. The Effect of Micro-Geometry and Load on Helical Gear Noise Excitations SAE Technical Paper 2005-01-2295 2005 10.4271/2005-01-2295
- Harris , O.J. , Douglas , M. , James , B.M. , Woolley , A.M. , et al. Predicting the Effects of Transmission Housing Flexibility and Bearing Stiffness on Gear Mesh Misalignment and Transmission Error 2000
- Plackett , R.L. and Burman , J.P. The Design of Optimum Multifactorial Experiments Biometrika 33 4 305 325 1946
- Chung , C. , Steyer , G. , Abe , T. , Clapper , M. et al. Gear Noise Reduction through Transmission Error Control and Gear Blank Dynamic Tuning SAE Technical Paper 1999-01-1766 1999 10.4271/1999-01-1766