This content is not included in your SAE MOBILUS subscription, or you are not logged in.
A Simulation Study on Particle Deposition and Filtration Characteristics in Wall-Flow DPF with Inhomogeneous Wall Structure Using a Two-Dimensional Microcosmic Model
Technical Paper
2019-01-0995
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
A new two-dimensional wall-flow DPF microstructure model has been developed in this paper to investigate the particle deposition distribution in DPF channels and the deep-bed filtration process of DPF. The substrate wall of the DPF having a thickness of L is divided into several layers with a uniform thickness of Δy along the cross-wall direction, and each layer has specific porosity and pore size. The pressure drop, particle deposition distribution and the dynamic deep-bed filtration process of the DPF with inhomogeneous wall structure are studied under various space velocities. Besides, the differences on DPF’s performance brought by the inhomogeneous wall structure are discussed by comparing with a homogeneous wall structure. The numerical results reveal that the macroscopic filtration characteristics including mass-based filtration efficiency, pressure drop and particle distribution at the wall surface are closely related to DPF’s porous wall property, space velocity and particle size. The through-wall velocity has direct relationships with DPF’s global filtration efficiency and particle deposition distributions along the wall surface. As for the deep-bed filtration process, an obvious difference can be observed between the heterogeneous and homogeneous wall structure DPF. More particles are deposited on the layers which have low porosity and small pore size rather than the top layer of the heterogeneous porous wall. While for the homogeneous wall structure DPF, the number of particles penetrating into the porous wall is much more, which results in different dynamic variations on porosity and permeability in DPF during the deep-bed filtration phase.
Recommended Content
Authors
Citation
Li, Z., Li, Z., Wu, Y., Shen, B. et al., "A Simulation Study on Particle Deposition and Filtration Characteristics in Wall-Flow DPF with Inhomogeneous Wall Structure Using a Two-Dimensional Microcosmic Model," SAE Technical Paper 2019-01-0995, 2019, https://doi.org/10.4271/2019-01-0995.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
[Unnamed Dataset 1] | ||
[Unnamed Dataset 2] |
Also In
References
- Konstandopoulos, A.G., Kostoglou, M., Skaperdas, E., Papaioannou, E. et al., “Fundamental Studies of Diesel Particulate Filters: Transient Loading, Regeneration and Aging,” SAE Technical Paper 2000-01-101625, 2000, doi:10.4271/2000-01-1016.
- Gong, J. and Rutland, C., “Study the DPF Regeneration at Transient Operating Conditions Using Integrated System-Level Model,” SAE Technical Paper 2010-01-0892, 2010, doi:10.4271/2010-01-0892.
- Basu, S., Henrichsen, M., Tando, P., He, S. et al., “Filtration Efficiency and Pressure Drop Performance of Ceramic Partial Wall Flow Diesel Particulate Filters,” SAE Int. J. Fuels Lubr. 6(3):877-893, 2013, doi:10.4271/2013-01-9072.
- Konstandopoulos, A. and Johnson, J., “Wall-Flow Diesel Particulate Filters-Teir Pressure Drop and Collection Efciency,” SAE Technical Paper 890405, 1989, doi:10.4271/890405.
- Bensaid, S., Marchisio, D.L., Fino, D., Saracco, G. et al., “Modelling of Diesel Particulate Filtration in Wall-Flow Traps,” Chemical Engineering Journal 154(1):211-218, 2009, doi:10.1016/j.cej.2009.03.043.
- Bensaid, S., Marchisio, D.L., and Fino, D., “Numerical Simulation of Soot Filtration and Combustion within Diesel Particulate Filters,” Chemical Engineering Science 65(1):357-363, 2010, doi:10.1016/j.ces.2009.06.051.
- Piscaglia, F., Rutland, C., and Foster, D., “Development of a CFD Model to Study the Hydrodynamic Characteristics and the Soot Deposition Mechanism on the Porous Wall of a Diesel Particulate Filter,” SAE Technical Paper 2005-01-0963, 2005, doi:10.4271/2005-01-0963.
- Liu, Y., Gong, J., Cai, L., Jiaqiang, E. et al., “Numerical Simulation of Gas-Particle Two-Phase Flow Characteristic during Deep Bed Filtration Process,” SAE Technical Paper 2007-01-1135, 2007, doi:10.4271/2007-01-1135.
- Liu, Y., Gong, J., Fu, J., Cai, H. et al., “Nanoparticle Motion Trajectories and Deposition in an Inlet Channel of Wall-Flow Diesel Particulate Filter,” Journal of Aerosol Science 40(4):307-323, 2009, doi:10.1016/2008.12.001.
- Gong, J. and Rutland, C.J., “PDF-Based Heterogeneous Multiscale Filtration Model,” Environmental Science & Technology 49(8):4963-4970, 2015, doi:10.1021/acs.est.5b00329.
- Gong, J., Viswanathan, S., Rothamer, D.A., Foster, D.E. et al., “Dynamic Heterogeneous Multiscale Filtration Model:Probing Micro- and Macroscopic Filtration Characteristics of Gasoline Particulate Filters,” Environ. Sci. Technol. 51(19):11196-11204, 2017, doi:10.1021/acs.est.7b02535.
- Meng, Z., Fang, J., Pu, Y., Yan, Y. et al., “Experimental Study on the Influence of DPF Micropore Structure and Particle Property on Its Filtration Process,” Journal of Combustion 2016:1-12, 2016, doi:10.1155/2016/9612856.
- Bollerhoff, T., Markomanolakis, I., and Koltsakis, G., “Filtration and Regeneration Modeling for Particulate Filters with Inhomogeneous Wall Structure,” Catalysis Today 188(1):24-31, 2012, doi:10.1016/j.cattod.2011.12.017.
- Dillon, H., Stewart, M., Maupin, G., Gallant, T. et al., “Optimizing the Advanced Ceramic Material for Diesel Particulate Filter Applications,” SAE Technical Paper 2007-01-1124, 2007, doi:10.4271/2007-01-1124.
- Gong, J., Stewart, M.L., Zelenyuk, A. et al., “Importance of Filter’s Microstructure in Dynamic Filtration Modeling of Gasoline Particulate Filters (GPFs): Inhomogeneous Porosity and Pore Size Distribution,” Chemical Engineering Journal 338:15-26, 2018, doi:10.1016/j.cej.2018.01.006.
- Huynh, C., Johnson, J., Yang, S., Bagley, S. et al., “A One-Dimensional Computational Model for Studying the Filtration and Regeneration Characteristics of a Catalyzed Wall-Flow Diesel Particulate Filter,” SAE Technical Paper 2003-01-0841, 2003, doi:10.4271/2003-01-0841.
- Fan, F.G. and Ahmadi, G., “Wall Deposition of Small Ellipsoids from Turbulent Air Flows-A Brownian Dynamics Simulation,” Journal of Aerosol Science 31:1205-1229, 2000, doi:10.1016/S0021-8502(00)00018-5.
- Dillon, H., Stewart, M., Maupin, G., Gallant, T. et al., “Optimizing the Advanced Ceramic Material for Diesel Particulate Filter Applications,” SAE Technical Paper 2007-01-1124, 2007, doi:10.4271/2007-01-1124.
- Karin, P., Cui, L., Rubio, P., Tsuruta, T. et al., “Microscopic Visualization of PM Trapping and Regeneration in Micro-Structural Pores of a DPF Wall,” SAE Int. J. Fuels Lubr. 2(1):661-669, 2009, doi:10.4271/2009-01-1476.
- Celik, I.B., Ghia, U., Roache, P.J., and Freitas, C.J., “Procedure for Estimation and Reporting of Uncertainty Due to Discretization in CFD Applications,” Journal of Fluids Engineering 130(7):078001, 2008, doi:10.1115/1.2960953.
- Wu, Y., Li, Z., Shen, B., Kong, X. et al., “A Simulation Study on Particle Motion in Diesel Particulate Filter Based on Microcosmic Channel Model,” SAE Technical Paper 2018-01-0964, 2018, doi:10.4271/2018-01-0964.