This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Optimization of the Process of Acceleration of a Vehicle Taking into Account the Regimes of Operation of Its Engine
Technical Paper
2019-01-0776
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Currently, in order to effectively use the engine's energy resources and implement the required indicators of the traction, speed and fuel-economic properties of a vehicle, designers and manufacturers are trying to realize some certain properties to the transmission design that will ensure the most complete coordination of their joint work. However, even the optimal constructive solution cannot be universal, i.e. what is good for some operating conditions is not effective for other conditions. Therefore, today it is economically expedient to create vehicles intended for a certain, relatively narrow range of operating conditions. A wide range of modern continuously variable transmissions (CVT), as well as automatic control systems make it possible to radically change the approach to the design of vehicle transmissions. It remains only to determine the algorithms for changing the gear ratio of the CVT. The technique of a choice of optimum transfer numbers of CVT of a car in view of modes of movement and work of its engine is offered. The results of calculation of the traction-dynamic and fuel-economic parameters of a car with CVT, the gear ratios of which change during the movement in accordance with the proposed procedure, in comparison with the actual prototype, confirmed the accepted optimization hypothesis and gave all grounds for recommending the application of this technique to practice when choosing the gear ratios of continuously variable transmission, depending on the mode of movement of vehicle and regimes of operation of its engine.
Recommended Content
Citation
Ulanov, A. and Aliukov, S., "Optimization of the Process of Acceleration of a Vehicle Taking into Account the Regimes of Operation of Its Engine," SAE Technical Paper 2019-01-0776, 2019, https://doi.org/10.4271/2019-01-0776.Also In
References
- Andreev , S.A. , Ryabov , G.K. , and Mikheev , S.S. 2001 183 187
- Andreev , S.A. , Ryabov , G.K. , and Mikheev , S.S. 2001 188 193
- Bortnitsky , P.I. and Zadorozhny , V.I. Traction-Speed Qualities of Cars Kiev Publishing Association “Vishcha School 1978
- Maltsev , V.F. , Archangel , G.V. , Umnyashkin , V.A. , and Pozdnyakov , Y.P. 1982 9 15
- Martykhin , Y.M. 1975
- Rusakov , S.S. 2007
- Ryabov , G.K. and Andreev , S.A. 2006
- Ryabov , G.K. , Andreev , S.A. , and Rodionov , R.M. 2001 246 250
- Spiridonovm , A.V. and Ryabov , G.K. 2008 191 193
- Spiridonov , A.V. and Ryabov , G.K. Izhevsk 2008 92 99
- Bents , D.J. Axial Force and Efficiency Tests of Fixed Center Variable Speed Belt Drive SAF Technical Paper 810103 1981 10.4271/810103
- Butler , K.L. A MATHLAB-Based Modeling and Simulation Package for Electric and Hybrid Electric Vehicle Design IEEE Transactions on Vehicular Technology 48 6 1770 1778 1999
- Hung , Y.H. and Hong , C.W. Dynamic Modeling and Powertrain Management of a Hybrid Electric Scooter AVEC 00 Michigan 2000
- Jamesm , I.B. 1995
- James , I.B. and Vaughan , N.D. Dynamic Modeling and Validation of the Regime Change Characteristics of a Split Power, Infinitely Variable Transmission IMechE International Seminar S540 1997
- Nashat , J. A Rule-Based Energy Management Strategy for a Series Hybrid Vehicle American Control Conference 1997
- Patterson , M. 1993
- Richard , F. and Stieg , W. Spencer Worley Belt Driven CVT Is 85% Efficient Automotive Engineering 90 7 36 40 1982
- Tilley , D.G. , Richards , C.W. , Tomlinson , S.P. , and Burrows , C.R. Role of Simulation in the Design of Fluid Power Systems IF AC Symposium CAD in Control Systems 1991
- Weeks , R.W. and Moskwa , J.J. Automotive Engine Modeling for Real-Time Control Using MATHLAB/SIMULINK SAE Technical Paper 950417 1995 10.4271/950417
- Aliukov , S.V. and Alyukov , A.S. Analysis of Methods for Solution of Differential Equations of Motion of Inertial Continuously Variable Transmissions SAE Technical Paper 2017-01-1105 2017 10.4271/2017-01-1105
- Velikanov , N.L. , Koryagin , S.I. , and Sharkov , O.V. Definition of Locked-Up Stresses around a Rectilinear Welding Seam MEACS2015, IOP Conf. Series: Materials Science and Engineering 124 012094 2016 10.1088/1757-899X/124/1/012094
- Keller , A. and Aliukov , S. Methodology of System Analysis of Power Distribution among Drive Wheels of an All-wheel-drive Truck SAE Technical Paper 2015-01-2788 2015 10.4271/2015-01-2788
- Aliukov , S. and Gorshenin , V. On the Question of External Characteristic of the Inertial Continuously Variable Transmission SAE Technical Paper 2014-01-1733 2014 10.4271/2014-01-1733
- Sharkov , O.V. , Koryagin , S.I. Operational Reliability of Free-Wheel Mechanisms in a Pulsed Variable-Speed Drive Russian Engineering Research 2017 37 9 12 10.3103/S1068798X1701021X
- Sharkov , O.V. , Koryagin , S.I. , and Velikanov , N.L. Shaping Cutter Original Profile for Fine-module Ratchet Teeth Cutting IOP Conference Series: Materials Science and Engineering 327 042102 2018 10.1088/1757-899X/327/4/042102
- Sharkov , O.V. , Koryagin , S.I. , and Velikanov , N.L. Design Models for Shaping of Tooth Profile of External Fine-Module Ratchet Teeth IOP Conference Series: Materials Science and Engineering 124 012165 2016 10.1088/1757-899X/124/1/012165