This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Novel Metrics for Validation of PIV and CFD in IC Engines
Technical Paper
2019-01-0716
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
In-cylinder flow motion has a significant effect on mixture preparation and combustion. Therefore, it is vital that CFD engine simulations are capable of accurately predicting the in-cylinder velocity fields. High-speed planar Particle Image Velocimetry (PIV) experiments have been performed on a single-cylinder GDI optical engine in order to validate CFD simulations for a range of engine conditions. Novel metrics have been developed to quantify the differences between experimental and simulated velocity fields in both alignment and magnitude. The Weighted Relevance Index (WRI) is a variation of the standard Relevance Index that accounts for the local velocity magnitudes to provide a robust comparison of the alignment between two vector fields. Similarly, the Weighted Magnitude Index (WMI) quantifies the differences in the local magnitudes of the two velocity fields. The WRI and WMI are normalised and combined to produce a combined metric, the Combined Magnitude and Relevance Index (CMRI), that quantifies the differences between two flow fields in both magnitude and alignment simultaneously.
PIV measurements were made every 5°ca in the central tumble plane during the induction and compression strokes. The WRI, WMI and CMRI metrics are used to validate numerical simulations of the motored in-cylinder flow measured with PIV for a range of valve lift profiles and engine speeds.
Recommended Content
Authors
Topic
Citation
Scott, B., Willman, C., Stone, R., Virelli, G. et al., "Novel Metrics for Validation of PIV and CFD in IC Engines," SAE Technical Paper 2019-01-0716, 2019, https://doi.org/10.4271/2019-01-0716.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 |
Also In
References
- Kalghatgi , G. Is It Really the end of Internal Combustion Engines and Petroleum in Transport? Applied Energy 225 965 974 2018 10.1016/j.apenergy.2018.05.076
- BP Energy Economics BP Energy Outlook 2018 2018 https://www.bp.com/content/dam/bp/en/corporate/pdf/energy-economics/energy-outlook/bp-energy-outlook-2018.pdf
- Miles , P.C. History and Evolution of Optically Accessible Research and Their Impact on Our Undestanding of Engine Combustion Proceedings of the ASME 2014 Internal Combustion Engine Division Fall Technical Conference ICEF2014-5701 2014
- Sick , V. , Drake , M.C. , and Fansler , T.D. High-Speed Imaging for Direct-Injection Gasoline Engine Research and Development Experiments in Fluids 49 937 947 2010 10.1007/s00348-010-0891-3
- Stone , R. Introduction to Internal Combustion Engines 4th Basingstoke Palgrave Macmillan 2012 9780230576636
- Baum , E. , Peterson , B. , Böhm , B. , and Dreizler , A. On the Validation of Les Applied to Internal Combustion Engine Flows: Part 1: Comprehensive Experimental Database Flow, Turbulence and Combustion 92 1-2 269 297 2014 10.1007/s10494-013-9468-6
- Raj , A.G.S. , Mallikarjuna , J.M. , and Venkitachalam , G. Analysis of In-Cylinder Air Motion in a DI Diesel Engine with Four Different Piston Bowl Configuration-A CFD and PIV Comparison SAE Int. J. Engines 6 4 1978 1983 2013 10.4271/2013-01-2786
- Ameen , M.M. , Yang , X. , Kuo , T. , and Som , S. Using LES to Simulate Cycle-to-Cycle Variability during the Gas Exchange Process Proceedings of the ASME 2017 Internal Combustion Fall Technical Conference ICEF2017-3591 2017 10.1115/ICEF20173591
- Yang , X. , Gupta , S. , Kuo , T. , and Gopalakrishnan , V. RANS and LES of IC Engine Flows-A Comparative Study Proceedings of the ASME 2013 Internal Combustion Engine Division Fall Technical Conference ICEF2013-19043 2013 10.1115/ICEF2013-19043
- Yang , X. , Gupta , S. , Kuo , T.-W. , and Gopalakrishnan , V. RANS and Large Eddy Simulation of Internal Combustion Engine Flows-A Comparative Study Journal of Engineering for Gas Turbines and Power 136 5 051507 2014 10.1115/1.4026165
- Pera , C. and Angelberger , C. Large Eddy Simulation of a Motored Single-Cylinder Engine Using System Simulation to Define Boundary Conditions: Methodology and Validation SAE Technical Paper 2011-01-0834 2011 10.4271/2011-01-0834
- Van Dam , N. , Sjöberg , M. , and Som , S. Large-Eddy Simulations of Spray Variability Effects on Flow Variability in a Direct-Injection Spark-Ignition Engine under Non-Combusting Operating Conditions SAE Technical Paper 2018-01-0196 2018 10.4271/2018-01-0196
- Van Dam , N. and Rutland , C. Understanding In-Cylinder Flow Variability Using Large Eddy Simulations Proceedings of the ASME 2015 Internal Combustion Engine Division Fall Technical Conference ICEF2015-1103 2015 10.1115/ICEF2015-1103
- Van Dam , N. , Zeng , W. , Sjöberg , M. , and Som , S. Parallel Multi-cycle LES of an Optical Pent-roof DISI Engine under Motored Operating Conditions Proceedings of the ASME 2017 Internal Combustion Fall Technical Conference ICEF2017-3603 2017 10.1115/ICEF2017-3603
- Liu , K. and Haworth , D.C. Development and Assessment of POD for Analysis of Turbulent Flow in Piston Engines SAE Technical Paper 2011-01-0830 2011 10.4271/2011-01-0830
- Wang , T. , Li , W. , Jia , M. , Liu , D. et al. Large-Eddy Simulation of In-Cylinder Flow in a DISI Engine with Charge Motion Control Valve: Proper Orthogonal Decomposition Analysis and Cyclic Variation Applied Thermal Engineering 75 561 574 2015 10.1016/j.applthermaleng.2014.10.081
- Hu , B. , Banerjee , S. , Liu , K. , and Xue , Q. Large Eddy Simulation of a Turbulent Non-Reacting Spray Jet Proceedings of the ASME 2015 Internal Combustion Engine Division ICEF2015-1033 2015 10.1115/ICEF2015-1033
- Kuo , T.W. , Yang , X. , Gopalakrishnan , V. , and Chen , Z. Large Eddy Simulation (LES) for IC Engine Flows Oil and Gas Science and Technology 69 1 61 81 2014 10.2516/ogst/2013127
- Chen , H. , Reuss , D.L. , Hung , D.L. , and Sick , V. A Practical Guide for Using Proper Orthogonal Decomposition in Engine Research International Journal of Engine Research 14 4 307 319 2013 10.1177/1468087412455748
- Chen , H. , Xu , M. , and Hung , D.L.S. Analyzing In-Cylinder Flow Evolution and Variations in a Spark-Ignition Direct-Injection Engine Using Phase-Invariant Proper Orthogonal Decomposition Technique SAE Technical Paper 2014-01-1174 2014 10.4271/2014-01-1174
- Chen , H. , Hung , D.L.S. , Xu , M. , Zhuang , H. , and Yang , J. Proper Orthogonal Decomposition Analysis of Fuel Spray Structure Variation in a Spark-Ignition Direct-Injection Optical Engine Experiments in Fluids 55 1703 2014 10.1007/s00348-014-1703-y
- Chen , H. , Hung , D.L.S. , Xu , M. , and Zhong , J. Analyzing the Cycle-To-Cycle Variations of Pulsing Spray Characteristics By Means of the Proper Orthogonal Decomposition Atomization and Sprays 23 7 623 641 2013 10.1615/AtomizSpr.2013007851
- Ameen , M.M. , Pei , Y. , and Som , S. Computing Statistical Averages from Large Eddy Simulation of Spray Flames SAE Technical Paper 2016-01-0585 2016 10.4271/2016-01-0585
- Ruhland , H. , Lorenz , T. , Dunstheimer , J. , Breuer , A. et al. A Study on Charge Motion Requirements for a Class-Leading GTDI Engine SAE Technical Paper 2017-24-0065 2017 10.4271/2017-24-0065
- Hakariya , M. , Toda , T. , and Sakai , M. The New Toyota Inline 4-Cylinder 2.5L Gasoline Engine SAE Technical Paper 2017-01-0121 2017 10.4271/2017-01-1021
- Yoshihara , Y. , Nakata , K. , Takahashi , D. , Omura , T. et al. Development of High Tumble Intake-Port for High Thermal Efficiency Engines SAE Technical Paper 2016-01-0692 2016 10.4271/2016-01-0692
- Abraham , P. , Reuss , D. , and Sick , V. High-Speed Particle Image Velocimetry Study of In-Cylinder Flows with Improved Dynamic Range SAE Technical Paper 2013-01-0542 2013 10.4271/2013-01-0542
- Westerweel , J. and Scarano , F. Universal Outlier Detection for PIV data Experiments in Fluids 39 1096 1100 2005 10.1007/s00348-005-0016-6
- Scott , B. , Willman , C. , Stone , R. , and Richardson , D. Measurement of the Flows Induced by Fuel Injection in a GDI Engines IMeche Engines Conference 2018 978-0-9956263-4-8
- CD-Adapco 2015