This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Influence of IC Engine Working Condition on the Lubrication Characteristics of Piston Ring
Technical Paper
2019-01-0591
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The lubrication analysis of IC engine piston ring is usually carried out under engine rated working condition. In actual use, the IC engine (especially the vehicle engine) does not always operate in rated working condition, and its working condition will be changed frequently. In this paper, an IC engine is taken as the studying object, based on the measured gas pressure in the engine cylinder, the lubrication characteristics of piston ring under different engine working conditions is analyzed in which the transport of lubricating oil between the piston ring and the cylinder liner is considered. The results indicate that the engine working condition has remarkable influence on the lubrication characteristics of IC engine piston ring. The worst lubrication status of piston ring may not occurred in the engine rated working condition. Therefore, it is not enough comprehensive and reasonable to analyze the lubrication of piston ring only under engine rated working condition, but its lubrication under different working conditions needs to be analyzed in the design of IC engine piston ring.
Recommended Content
Authors
Citation
Wang, X., Duan, J., and Sun, J., "The Influence of IC Engine Working Condition on the Lubrication Characteristics of Piston Ring," SAE Technical Paper 2019-01-0591, 2019, https://doi.org/10.4271/2019-01-0591.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 |
Also In
References
- Jeng , Y.R. Theoretical Analysis of Piston-Ring Lubrication Part I - Fully Flooded Lubrication Tribology Transactions 35 696 706 1992
- Ma , M.T. , Smith , E.H. , and Sherrington , I. A Three-Dimensional Analysis of Piston Ring Lubrication Part 1: Modelling Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 209 1 14 1995
- Rahmani , R. , Theodossiades , S. , Rahnejat , H. et al. Transient Elastohydrodynamic Lubrication of Rough New or Worn Piston Compression Ring Conjunction with an Out-of-Round Cylinder Bore Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226 4 284 305 2012
- Harigaya , Y. , Suzuki , M. , and Takiguchi , M. Analysis of Oil Film Thickness on a Piston Ring of Diesel Engine: Effect of Oil Film Temperature Transactions of the ASME, Journal of Engineering for Gas Turbines and Power 125 596 603 2003
- Zavos , A. and Nikolakopoulos , P. Thermo-Mixed Lubrication Analysis of Coated Compression Rings with Worn Cylinder Profiles Industrial Lubrication and Tribology 69 1 15 29 2017
- Felter , C.L. Numerical Simulation of Piston Ring Lubrication Tribology International 41 914 919 2008
- Meng , X. , Gu , C. , Xie , Y. et al. A Two-Dimensional Starved Lubrication Analysis Method for Textured Surfaces International Journal of Engine Research 17 10 1062 1076 2016
- Zhang , Y. , Luo , M. , Chen , G. et al. Two Dimensional Analysis of Lubrication for Piston Ring-Cylinder Liner Pair Journal of Mechanical Engineering 35 6 21 24 1999
- Söchting , S.J. and Sherrington , I. The Effect of Load and Viscosity on the Minimum Operating Oil Film Thickness of Piston-rings in Internal Combustion Engines Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 223 383 391 2009
- Shahmohamadi , H. , Rahmani , R. , Rahnejat , H. et al. Thermo-Mixed Hydrodynamics of Piston Compression Ring Conjunction Tribology Letter 51 323 340 2013
- Ausas , R.F. , Jai , M. , Ciuperca , I.S. et al. Conservative One-Dimensional Finite Volume Discretization of a New Cavitation Model for Piston-Ring Lubrication Tribology International 57 54 66 2013
- He , Z. , Zhang , J. , Ma , W. et al. A Concurrent Reynolds BC Algorithm for Piston Ring Cavitation Lubrication Problems with Surface Roughness Tribology Transactions 57 353 365 2014
- Zhang , J. , Li , Z. , He , Z. et al. Dynamic Lubrication Analysis of Piston Ring-Liner System Considering Cavitation Transactions of CSICE 31 3 268 275 2013
- Jiang , Y.K. , Zhang , J.P. , Hong , G. et al. 3D EHD Lubrication and Wear for Piston Ring-Cylinder Liner on Diesel Engines International Journal of Automotive Technology 16 1 1 15 2015
- Guo , Y. , Lu , X. , Li , W. et al. A Mixed-Lubrication Model Considering Elastoplastic Contact for a Piston Ring and Application to a Ring Pack Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 101 178 193 2015
- Gu , C. , Meng , X. , Xie , Y. et al. A Thermal Mixed Lubrication Model to Study the Textured Ring/Liner Conjunction Tribology International 101 178 193 2016
- Usman , A. and Park , C.W. Numerical Investigation of Tribological Performance in Mixed Lubrication of Textured Piston Ring-Liner Conjunction with a Non-Circular Cylinder Bore Tribology International 105 148 157 2017
- Bai , M. , Ding , T. , and Dong , W. A Study on Lubrication and Friction on Piston-Ring Pack in IC Engine Transactions of CSICE 23 1 72 76 2005
- Zhou , L. , Bai , M. , and Lu , J. Numerical Simulation into Influence of Structural Parameters on Lubrication and Friction Performance of Piston Ring-Liner Transactions of CSICE 30 5 456 461 2012
- Wu , C. and Zheng , L. An Average Reynolds Equation for Partial Film Lubrication with a Contact Factor Transactions of the ASME, Journal of Tribology 111 188 191 1989
- Greenwood , J.A. and Tripp , J.H. The Contact of Two Nominally Flat Rough Surfaces Proc. Instn. Mech. Engrs. 185 625 1970 633 71
- Patir , N. and Cheng , H.S. An Average Flow Model for Determining Effect of Three Dimensional Roughness on Partial Hydrodynamic Lubrication Transactions of the ASME, Journal of Lubrication Technology 100 12 17 1978
- Patir , N. and Cheng , H.S. Application of Average Flow Model to Lubrication between Rough Sliding Surfaces Transactions of the ASME, Journal of Lubrication Technology 101 220 229 1979
- Ruddy , B.L. , Dowson , D. , and Economou , P.N. A Theoretical Analysis of the Twin-Land Type of Oil Control Ring Proc. Instn. Mech. Engrs. 23 2 51 62 1981