This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Simulation and Measurement of Transient Fluid Phenomena within Diesel Injection

Journal Article
2019-01-0066
ISSN: 2641-9637, e-ISSN: 2641-9645
Published January 15, 2019 by SAE International in United States
Simulation and Measurement of Transient Fluid Phenomena within Diesel Injection
Sector:
Citation: Gold, M., Pearson, R., Turner, J., Sykes, D. et al., "Simulation and Measurement of Transient Fluid Phenomena within Diesel Injection," SAE Int. J. Adv. & Curr. Prac. in Mobility 1(1):291-305, 2019, https://doi.org/10.4271/2019-01-0066.
Language: English

References

  1. http://eupocketbook.theicct.org 2015
  2. Zeh , D. , Hammer , J. , Uhr , C. , Ruckle , M. et al. Bosch Diesel Injection Technology - Response for Every Vehicle Class 23rd Aachen Colloquium: Automobile and Engine Technology Aachen Oct. 7-8, 2014
  3. Judge , R. , Beduneau , J.-L. , Boncompte , X. , Cardon , C. et al. The Next Generation of Delphi Common Rail Systems for Light and Medium Duty Commercial Vehicles 23rd Aachen Colloquium: Automobile and Engine Technology Aachen Oct. 7-8, 2014
  4. Schoppe , D. , Atzler , F. , Kastner , O. , and Kapphan , F. High Performance Diesel Direct Driven Piezo Common Rail Injection System 23rd Aachen Colloquium: Automobile and Engine Technology Aachen Oct. 7-8, 2014
  5. Piock , W. , Hoffmann , G. , Ramsay , G. , Millen , R. et al. Delphi’s Fuel Injection Systems for Efficient and Clean Gasoline Engines with Direct Injection 36th International Vienna Motor Symposium Vienna May 7-8, 2015
  6. Eichler , F. , Demmelbauer-Ebner , W. , Theobald , J. , Stiebels , B. et al. The New EA211 TSI evo from Volkswagen 37th International Vienna Motor Symposium Vienna Apr. 28-29, 2016
  7. Eltel , F. , Schafer , J. , Konlgstein , A. , and Heeger , C. Fuel Pressure Increase up to 50MPa for Gasoline Direct-Injection Engines MTZ Worldwide 79 7-8 50 55 2018
  8. Maier , R. , Warga , J. , Pauer , T. , Gerhardt , J. et al. The Next Generation BOSCH Common Rail Injectors with Digital Rate Shaping - A Key Factor for Meeting Future Requirements 33rd International Vienna Motor Symposium Vienna Apr. 26-27, 2012
  9. Birgel , A. , Ladommatos , N. , Aleiferis , P. , Zulch , S. et al. Deposit Formation in the Holes of Diesel Injector Nozzles: A Critical Review SAE Technical Paper 2008-01-2383 2008 10.4271/2008-01-2383
  10. Winterbone , D. , Clough , E. , Rao , K. , Richards , P. et al. The Effect of DI Nozzle Fouling on Fuel Spray Characteristics SAE Technical Paper 922232 1992 10.4271/922232
  11. Kalghatgi , G. Fuel/Engine Interactions Warrendale, PA SAE International 2014 978-0-7680-6458-2
  12. Smith , A. and Williams , R. Linking the Physical Manifestation and Performance Effects of Injector Nozzle Deposits in Modern Diesel Engines SAE Int. J. Fuels Lubr. 8 2 344 357 2015 10.4271/2015-10-0892
  13. Crua , C. , De Sercey , G. , Gold , M. , and Heikal , M. Image-Based Analysis of Evaporating Diesel Sprays in the Near-Nozzle Region ILASS - Europe 2013, 25th European Conference on Liquid Atomization and Spray Systems Chania, Greece Sept. 1-4, 2013
  14. Crua , C. , Heikal , M. , and Gold , M. Microscopic Imaging of the Initial Stage of Diesel Spray Formation Fuel 157 140 150 2015
  15. Crua , C. 2002
  16. Slavchov , R. , Mosbach , S. , Kraft , M. , Pearson , R. et al. An Adsorption-Precipitation Model for the Formation of Injector External Deposits in an Internal Combstion Engine J. Appl. Energy 228 1423 1438 2018
  17. Crua , C. , Sercey , G. , Heikal , M. , and Gold , M. Dropsizing of near Nozzle Diesel and RME Sprays by Microscopic Imaging ICLASS 2012, 12th Triennial International Conference on Liquid Atomisation & Spray Systems Heidelberg Sept. 2-6, 2012
  18. Koukouvinis , P. , Bruecker , C. , and Gavaises , M. Unveiling the Physical Mechanism behind Pistol Shrimp Cavitation Nature Scientific Reports 7 2017 10.1038/s41598-017-14312-0
  19. Murali-Girija , M. , Koukouvinis , P. , and Gavaises , M. Numerical Simulation of Cavitation and Atomization Using a Fully Compressible Three-Phase Model Physical Review Fluids 3 064304 10.1103/PhysRevFluids.3.064304
  20. Mittal , R. and Iaccarino , G. Immersed Boundary Methods Annual Review of Fluid Mechanics 37 239 261 2005 10.1146/annurev.fluid.37.061903.175743
  21. Reboud , J. , Stutz , B. , and Coutier-Delgosha , O. Two Phase Flow Structure of Cavitation: Experiment and Modeling of Unsteady Effects 3rd International Symposium on Cavitation, CAV1998 1998 26
  22. Wilcox , D. Turbulence Modeling for CFD D C W Industries 2006 9781928729099
  23. Koukouvinis , P. , Naseri , H. , and Gavaises , M. Performance of Turbulence and Cavitation Models in Prediction of Incipient and Developed Cavitation International Journal of Engine Research 2016 10.1177/1468087416658604
  24. Andriotis , M.G. and Arcoumanis , C. Vortex Flow and Cavitation in Diesel Injector Nozzles J. Fluid Mech. 610 195 215 2008
  25. Battistoni , M. , Xue , Q. , Som , S. , and Pomraning , E. Effect of Off-Axis Needle Motion on Internal Nozzle and Near Exit Flow in a Multi-Hole Diesel Injector SAE Int. J. Fuels Lubr. 7 1 167 182 2014 10.4271/2014-01-1426
  26. Theodorakakos , A. , Gavaises , M. , Pearson , R. , and Gold , M. Influence of Fuel Composition on Cavitation Inception and Further Development in Diesel Fuel Injectors IMechE 2015
  27. Battistoni , M. , Xue , Q. , and Som , S. LES of Spray Transients: Start and End of Injection Phenomena Oil & Gas Science Technology, Rev. IFP Energies Nouvelles 71 4 2016 10.2516/ogst/2015024
  28. Battistoni , M. , Poggiani , C. , and Som , S. Prediction of the Nozzle Flow and Jet Characteristics at Start and End of Injection: Transient Behaviors SAE Int. J. Engines 9 1 84 97 2016 2016 10.4271/2015-01-1850
  29. Fischer , A. and Thelliez , M. Methodology and Tools to Predict GDI Injector Tip Wetting as Predecessor of Tip Sooting SAE Technical Paper 2018-01-0286 2018 10.4271/2018-01-0286
  30. Ghiji , M. , Goldsworthy , L. , Brandner , P. , Garaniya , V. , and Hield , P. Numerical and Experimental Investigation of Early Stage Diesel Sprays Fuel 175 274 286 2016
  31. Ghiji , M. , Goldsworthy , L. , Brandner , P. , Garaniya , V. , and Hield , P. Analysis of Diesel Spray Dynamics Using a Compressible Eulerian/VOF/LES Model and Microscopic Shadowgraphy Fuel 188 352 366 2017
  32. Manin , J. , Pickett , L. , and Yasutomi , K. Transient Cavitation in Transparent Diesel Injectors ICLASS 2018, 14th Triennial International Conference on Liquid Atomization and Spray Systems Chicago, IL July 22-26, 2018
  33. Papadopoulos , N. and Aleiferis , P. Numerical Modelling of the In-Nozzle Flow of a Diesel Injector with Moving Needle during and after the End of a Full Injection Event SAE Int. J. Engines 8 5 2285 2302 2015 10.4271/2015-24-2472
  34. Swantek , A. , Duke , D. , Tilocco , F. , Sovis , N. et al. End of Injection, Mass Expulsion Behaviors in Single Hole Diesel Fuel Injectors ILASS Americas 2014
  35. Moon , S. , Gaob , Y. , Park , S. , Wang , J. et al. Effect of the Number and Position of Nozzle Holes on In- and Near-Nozzle Dynamic Characteristics of Diesel Injection Fuel 150 112 122 2015
  36. Pos , R. , Avulapati , M. , Wardle , R. , Cracknell , R. et al. Combustion of Ligaments and Droplets Expelled after the End of Injection in a Multi-Hole Diesel Injector Fuel 197 459 466 2017
  37. Ubbink , O 1997

Cited By