This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Modeling of Aftertreatment Technologies to Meet a Future HD Low-NOx Standard
Technical Paper
2019-01-0043
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The low-NOx standard for heavy duty trucks proposed by the California Air Resources Board represents a significant challenge to the engine and aftertreatment system. In this study, exhaust thermal management requirements were quantified using a combination of engine and aftertreatment modeling. First, a 1-D engine model was used to develop a control strategy capable of increasing the exhaust enthalpy and decreasing the engine-out NOx over the initial portion of the cold FTP cycle. The outputs from this model were then used as inputs to a 1-D model of a representative HD aftertreatment system. Several different passive exhaust thermal management technologies were evaluated with this aftertreatment system model, including insulating the downpipe, close-coupling the aftertreatment system, and reducing the thermal inertia of the DOC and DPF; the last option provides the most benefit to early NOx conversion. As an example of active exhaust thermal management, a model of a mini-burner was inserted into the system model; this device is able to raise the system temperature quickly, using less fuel than the engine control strategy. Lastly, early NH3 dosing and NH3 preloading on the SCR catalyst were examined; pre-loading would appear to be much more effective.
Recommended Content
Technical Paper | HD Diesel Thermal Management Improvements Toward Meeting 2010 Standards |
Technical Paper | A Simplified Approach to Modeling Exhaust System Emissions: SIMTWC |
Technical Paper | Transient CFD: How Valuable is it for Catalyst Design? |
Authors
Citation
Harris, T. and Gardner, T., "Modeling of Aftertreatment Technologies to Meet a Future HD Low-NOx Standard," SAE Technical Paper 2019-01-0043, 2019, https://doi.org/10.4271/2019-01-0043.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 |
Also In
References
- https://www.arb.ca.gov/msprog/hdlownox/hdlownox.htm
- Sharp , C. , Webb , C. , Neely , G. , Carter , M. et al. Achieving Ultra Low NOx Emissions Levels with a 2017 Heavy-Duty On-Highway TC Diesel Engine and an Advanced Technology Emissions System - Thermal Management Strategies SAE Int. J. Engines 10 4 1697 1712 2017 10.4271/2017-01-0954
- Dahodwala , M. , Joshi , S. , Koehler , E. , Franke , M. et al. Strategies for Meeting Phase 2 GHG and Ultra-Low NOx Emission Standards for Heavy-Duty Diesel Engines SAE Technical Paper 2018-01-1429 2018 10.4271/2018-01-1429
- Pant , A. et al. Kinetic Model of NOx SCR Using Urea on Commercial Cu-Zeolite Catalyst Ind. Eng. Chem. Res. 50 5490 5498 2011
- Sampara , C. et al. Global Kinetic for a Commercial Diesel Oxidation Catalyst with Two Exhaust Hydrocarbons Ind. Eng. Chem. Res. 47 311 322 2008
- https://www.gtisoft.com/wp-content/uploads/2017/11/Tenneco_Analysis-of-Insulation-Structures-.pdf
- http://www.amminex.com/Files/Filer/amminex/LA%20Auto%20Show.pdf