This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Characterization of the brake system of a Formula SAE vehicle
Technical Paper
2018-36-0148
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
SAE Formula vehicles are required under extreme braking conditions during the race, where four-wheel braking is required. The brake assembly is composed of mechanical and hydraulic systems, which depending on the assembly of the components, can be subject to losses, causing a variation of the expected behavior. During braking situations, it is important to consider the load transfer in order to configure the braking distribution between the front and rear axles of the car with the best setup desired. The main objective of this work is to formulate a numerical model using the empirical data from the brake system of a SAE Formula vehicle to ensure that, after force is applied to the pedal, and the corresponding load is transferred to the front axle, the vehicle can lock the four wheels. Experimental data was acquired through static tests carried out on the bench and prototype vehicle, controlling the change of pressure and force between the front and rear axles through the balance bar mechanism. These tests were performed using low cost instrumentation, based on the Arduino platform. These analyses ensures that a vehicle with a brake distribution configured by the balance bar will lock the four wheels during the brake tests.
Authors
Citation
da Silva, P. and Idehara, S., "Characterization of the brake system of a Formula SAE vehicle," SAE Technical Paper 2018-36-0148, 2018, https://doi.org/10.4271/2018-36-0148.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 |
Also In
References
- Heiring B ; Ersoy M. Chassis Handbook Wiesbaden Springer Fachmedien 2011
- Breuer B ; Bill K. Brake Technology Handbook Warrendale, Pennsylvania SAE International 2008
- Wong J. Y. Theory of Ground Vehicles John Wiley and Sons, Inc. New York 2001 3rd
- Genta G , Morello L. The Automotives Chassis 2 Italy Springer 2009
- Surblys V , Sokolovskij E Research of the vehicle brake testing efficiency Procedia Engineering 134 452 458 2016
- Albatran S.A.A. Automotive brake pipes characteristics and their effects on brake performance Ain Shams Engineering Journal 3 279 287 2012
- Albatran S.A.A. Effect of hydraulic brake pipe inner diameter on vehicle dynamics International Journal of Automotive Technology 16 2 231 237 2015
- Mishra S , Janghu S. Balance bar design and motion analysis of pushrod 3 3 69 72 2014
- Puranik A , Jaju H , Karambelkar T Brake bias bar design and simulation on a Formular student car International Conference on Ideas, Impact and Innovation in Mechanical Engineering 5 6 852 855 2017
- Puhn , F. Brake Handbook 2 New York HpBooks 1985
- Tao J and Wang B Study of the dynamic threshold and control logic on anti-lock brake system (ABS) Vehicle electronics conference Changchun, People’s Republic of China 6-9 September 1999 82 85
- Hardy MSA and Cebon D Investigation of anti-lock braking strategies for heavy goods vehicles Proc IMechE Part D: J Automobile Engineering 1995 209 4 263 271
- Shryokau B , Wang D , Augsbur K and Ivanov V Vehicle dynamics with brake hysteresis Proc IMechE Part D: J Automobile Engineering 2013 227 2 139 150
- Tretsiak D , Kliauzovich S , Augsburg K , et al. Research in hydraulic brake components and operational factors influencing the hysteresis losses Proc IMechE Part D: J Automobile Engineering 2008 222 9 1633 1645
- Gillespie , T. Fundamentals of Vehicle Dynamics Warrendale SAE International 1992
- Pamphlet D. Analysis and design automotive brake system. [S. l.]: US Army material development & readiness command 1976
- Limpert R. Brake Design and Safety 2 Warrendale Pennsylvania, SAE International 1999
- Carlos , G. Como determinar a incerteza de medição Centro de educação, consultoria e treinamento em metrologia e sistema de qualidade 2008